Here's two paragraphs from later on that sum much better:

> We've seen it hundreds of times in all kinds of software. Functions that return bool instead of an error code. Where did the precise error vanish to? Poof, it's gone! What used to be a useful error message became false, and if you're lucky you'll get a generic "Unexpected error" appearing on screen. And that's if your program is using a library. If it's calling out to a command-line worker, the most likely case is it won't get checked at all and will just get printed out into a log file you'll never find, and then never seen again.

> (image) Homer's typing bird: http://www.codersnotes.com/notes/something-rotten-in-the-cor...

> We're making systems that are fragile, because they're just glued on rather than bolted together. We're wrapping complex things up a wrappers that don't take the same responsibilities as the things they rely on. Like Homer's pecking bird in the Simpsons, they work just fine when everything is as expected, but when the slightest change in situation happens then everything breaks.

I think the article is worth reading in full.

Historically, there were multiple UNIX debuggers. It's true, gdb largely exterminated them (and anyway, when people say UNIX they often mean linux+freebsd+macos, where gdb was the defacto standard). However, there is now a second common UNIX debugger from the llvm/clang alternate universe (lldb).

In the very bad old days, debugger wrappers did drive gdb via the exact same interface that a human would, with all the terribleness that entails. but gdb has gone through several iterations of "GDB/MI", alternate APIs for "machine interfaces"; the current iteration seems to be "mi2".

Besides this, GDB has long since standardized the "debugger stub", which does low level operations like reading memory from the debugged process, starting/interrupting, etc.

As you can see, there are a plurality of interfaces to the debugger, several of them oriented specifically to use by other programs, rather than being repurposed human interfaces.

Besides this, gdb has also become internally extensible in Python, which is pretty great.

In short, invoking gdb as a subprocess is A LOT more like using an API than it is like trying to parse the output of "ls -l" as the only way to get a listing of files and their properties. It just happens to involve a second address space (a third, when you count the debugged program). It's just stream oriented, and doesn't look like JSON (or name your preferred hotness) because it was developed independently of, and quite possibly before, that preferred hotness.

(I'm pretty sure lldb's interface is also designed to be driven by other programs from the start, and it may also support a same-address-space embedding mode, but I don't have any actual experience using lldb, I just know it's out there)

A few days ago, there was a UI designer on here who was looking for an open source program to work on. I suggested "git gui". Git's default GUI is a Tk wrapper around the command line program. Lots of buttons, corresponding to command line options. No understanding at the GUI level of what's safe, what's useful right now, and what the state of the project is.

The original Macintosh deliberately lacked a command line, so programmers had to figure out a usable GUI for everything. They had the right idea.

One of the original design misfeatures of UNIX is that programs take in command line parameters and environment variables, but all they give back is a numeric error code. If they gave back a list of strings and a set of name/value pairs, and there was some convention about what should come back, scripts and GUI front ends would be less dumb.

A thousand times yes.

Earlier this year, two of us spent a full day debugging a problem with some of our automation. Our team has pretty good automation, for the most part, but this particular problem was in kind of a dark corner. A shell script in the automation would start up a process in the background, and then send commands to that process. The background process could be slow to start up at times, so to deal with this, the commands running in the foreground had long timeouts if any. Guess what happens if the background process dies?

Well, the shell script doesn't care, that's for sure, it wasn't watching for error codes in background processes. It was a bit of an adventure following the path from the foreground commands to the missing background process, and finding the log files for the background process.

It's one of the things I like about writing this quick-and-dirty automation in Go--the error handling is so explicit that you'll usually end up with good logs explaining what went wrong and what the program was trying to do at the time. Much better than dealing with shell scripts. Shell scripts are quick to write but you're often left in a bad position when they fail in unexpected ways, or even in expected ways.

(The actual bug we hunted down was traced to one missing line in a configuration file, but the problems with that piece of automation are far larger.)

> We're not talking about calling out to a library here. We're talking about actually launching an instance of GDB, passing it commands, and parsing the results it prints out. And this is where we get led down a dangerous path.

That's just wrong. GDB has a reasonably well specified control protocol, which is what everything uses. Yes, it's ASCII and readable. No, it's not just "parsing gdb output".

Come on.

Unix CLI utilities have well defined way to return an error - non zero exit code. It is even possible to return different errors as different exit codes, though it is rarely done.

Never do

  printf("here's a number: %d", 11);

  int attempts = 0
  int ret = printf("here's a number: %d", 11);
  while (attempts++ < max_attempts && ret < 0) {
    switch (ret) {
      case EINTR:
      case EAGAIN:
        ret = printf("here's a number: %d", 11);
      default:
        // At this point you, as a programmer, should STOP AND THINK.
        // What would be a reasonable reaction here ? How will it affect
        // everything else the program does ? What is the correct way to
        // proceed ?
        //
        // P.S. Anyone doing "return -1;" at this point should be taken out and shot.
        // and yes, that's the C equivalent of what every Go programmer always does.

        panic("printf error", ret); // for example, crash the program.
    }
  }

There. Isn't explicit erroring great ? NO IT ISN'T.

Needless to say, this has an almost direct translation to Go. Does anyone do this ? Of course not. In Go, like in C, like in shell scripting, in the vast majority of programs nearly all errors are ignored.

That's why exceptions are so very superior to explicit error handling : it accomplishes many things :

1) it alerts the user that an error occured. "Explicit error handling" like C, Go, most C++, ... do will simply silently attempt to proceed, likely turning a small error or a typo into a disaster or catastrophe. Silent database corruption, here we come !

2) It provides information about where the error occured. Stop me if this sounds familiar: "when an error is printed, and the program crashes, I download the source and grep it for what I think is a unique word in the error message. When it turns out it isn't I get cranky. When it turns out there isn't a unique word in the error I just sit down in a quiet corner and softly cry".

3) It allows for "layered" error management strategies. I'm not saying it gets it up to OCaml levels, but it is far superior to C or Go error management. In the main function, you catch any Exception for the various parts of the program you start, log it in a reasonable manner, alert if necessary, and restart the relevant portion of the program. Inside the parts of the program you catch finer grained exceptions with more explicit management.

4) it's far more concise.

So "explicit" error management ? Let's just be truthful here (just look at Github examples of C and Go code): it's really just ignoring errors.

You can find coding errors involving ignored errors in the Go standard library in minutes. Examples:

1) https://github.com/golang/go/blob/master/src/bufio/bufio.go#...

2) https://github.com/golang/go/blob/master/src/bufio/bufio.go#...

3) https://github.com/golang/go/blob/master/src/flag/flag.go#L5...

So even the Go core developers themselves can't be trusted to not ignore errors.