How to use FIDO2 USB keys with SSH(stavros.io) |
How to use FIDO2 USB keys with SSH(stavros.io) |
FIDO2/U2F Just Works in:
Chrome on Windows
Firefox on Windows
Chrome on Mac
Firefox on Mac
Chrome in Ubuntu 20
Firefox in Ubuntu 20
Safari
[1] https://developer.apple.com/documentation/safari-release-not...
[2] https://developer.apple.com/documentation/ios-ipados-release...
New web sites should do WebAuthn to enable this functionality, here's a guide someone else wrote that I found helpful in talking about the moving parts to actually implement this: https://webauthn.guide/
Firefox's WebAuthn implementation isn't as complete as it would ideally be, but it does have a nice feature of asking the user whether to give out the somewhat privacy-infringing "attestation" from a FIDO2 device when it is requested by a web site. IMNSHO ordinary web sites, especially where a second factor isn't even mandatory, should not be asking for attestation and I always refuse.
https://developer.apple.com/documentation/safari-release-not...
I'm incredibly excited about FIDO2, but this is quite underwhelming honestly. I'd like to SSH with a credential on my Yubikey, not by a credential or configuration already stored on my computer that is unlocked by my Yubikey. I'd like to be able to plug in my Yubikey anywhere and go. My Linux desktop, my Macbook, my Windows desktop, my Android phone.
- Yubikey with GPG/PIV for SSH: your Yubikey stores your private key. You can take it anywhere, plug it in, [have to go through all the setup required for your computer to talk GPG/PIV], and log in.
- Yubikey with FIDO2 for SSH: your Yubikey stores a symmetric key to unlock your private key on your computer. [You cannot take it anywhere], plug it in, don't have to set anything up if your client and server have this (eventually), and log in.
FIDO2 is solving a lot of authentication convenience problems, but not this one I think. I get that this pretty nice when integrating with Windows Hello or Apple's TouchID, but I don't think FIDO2 USB key with SSH is that great.
> ssh-keygen -t ecdsa-sk -O resident -f ~/.ssh/id_mykey_sk
I know this is just a reference, but it's still manual configuration. On a host with an SSH client that can speak PIV [this is a challenge], I can just plug in, enter the PIV PIN code, and go.
There's no need to mess around with the GPG side of the Yubikey to get SSH working. Just the "plain" side of the Yubikey will work (which is great on a Mac because all you need is the basic dylibs - downloadable from Yubi and easily mv/cp installable in the relevant lib dir - rather than needing to mess around installing gpg). Added bonus is you enforce touch for key usage.
Once all of those platforms have a more recent OpenSSH, you can ssh-add -K to add keys to your SSH agent.
Client-side hardware dependencies:
* USB token with U2F (FIDO) support. FIDO2 is optional. Any old YubiKey or similar will work.
* For the resident key feature only: USB token with FIDO2 support.
* To avoid confusion, only a single USB token should be connected when ssh-keygen is run. (When ssh is run, multiple USB tokens work, the user can touch the wrong one many times, and authentication succeeds after the user touches the right one.)
* ED25519 support in the token is optional. (`ssh-keygen -t ecdsa-sk ...' uses the NIST P-256 curve, which works with all U2F tokens.)
Client-side software dependencies:
* For communicating with the token over USB, OpenBSD or (Linux with udev).
* OpenSSH 8.2p1 or later.
* OpenSSH client (ssh) compiled with `configure --with-security-key-builtin'. Without this, eventually authentication will fail locally with `internal security key support not enabled'. It's possible to work around this by compiling an .so file and specifying it with `ssh -o SecurityKeyProvider=....so', but it's complicated.
Server-side software dependencies:
* OpenSSH 8.2p1 or later.
* Default OpenSSH server (sshd) settings (without PubkeyAcceptedKeyTypes), or PubkeyAcceptedKeyTypes in /etc/ssh/sshd_config containing sk-ecdsa-sha2-nistp256@openssh.com and (optionally, for ed25519-sk keys) sk-ssh-ed25519@openssh.com .
Also, if it doesn't work on your client system only because OpenSSH 8.2 was compiled without `configure --with-security-key-builtin', here is how to make it work: https://github.com/pts/external-sk-libfido2
All of the docs I have read assume that you are logged in locally on the system, but if you are not (like me) then things fall apart.
I am running a Windows 10 desktop, and then SSH into my local Linux box from Windows. Both systems are sitting next to me and I can press the Yubikey easily.
My local Linux system is running Fedora 32 and I did the following to enable a user connected via SSH to use the Yubikey.
Created a user group for yubikey users, which in reality only has me in it.
Created a /etc/polkit-1/rules.d/99-pcsc-yubikey.rules file which gives smartcard access to the 'yubikey' group. Without this then 'ykman list' would not work.
Created a /etc/udev/rules.d/99-yubikey.rules to give access to the 'yubikey' group. I used /lib/udev/rules.d/69-yubikey.rules as the starting point for my file. I had to add my two Yubikeys USB IDs (lsusb to see them) as they weren't present.
Made sure to log out and back in to have the 'yubikey' group be active for my user. I vaguely remember a command that would do it, but I forgot it.
After all of that I got it to work :)
That would require an extra press of the token's button for each extra authentication, right?
Would someone please confirm this? If it did require another key press that would be pretty huge.
For that to happen the agent would need to have some way to get the key out of the FIDO authenticator, which is deliberately not intended to be possible. I will now go away and confirm that this behaves as I expected and update this message shortly.
Update: Yes, the OpenSSH agent just has code to go talk to the authenticator each time it needs to sign something. The authenticator may or may not (most seem to not) allow this to happen without verifying user presence (e.g. via a button press or touching a contact) but even if your device does allow this the signed payload says whether the user was present, so a remote SSHD can (if it wanted) demand to see signed evidence of user presence or refuse login, and I think a SSH agent can't fake that without help from the FIDO authenticator itself.
Also, a big draw of the USB SSH key for me is that I can plug it in to other computers and connect to my servers, which smartcard mode didn't do, so that was a big drawback for me.
Being able to easily migrate to a new computer sounds like a great feature though.
Sure, a FIDO key is cheaper.
Some get confused or have bad associations when hearing the word 'applet', but that is what they are, as in 'Java applet'.
This one is too https://developers.yubico.com/ykneo-oath/Releases/
When I SSH to a host configured like this, the Yubikey U2F key I am using blinks to ask me to touch it. It's really quite neat.
Edit: They fixed it.
from ssh-keygen:
resident
Indicate that the key should be stored on the FIDO authenticator itself. Resident keys may be supported on
FIDO2 tokens and typically require that a PIN be set on the token prior to generation. Resident keys may be
loaded off the token using ssh-add(1).
-K Load resident keys from a FIDO authenticatorGitlab? No. Github? No. My gateway with a hand built gentoo kernel? Yes.
It seems functional, but you've also got to be aware that `ed25519-sk` and `ecdsa-sk` have sort of spotty support in the devices too. `ed25519-sk` does not work on a Yubikey <5, for example.
Ubuntu 20.04 and later supports this, and, since that's LTS, it means that quite a few servers and machines will be supporting it already.
Github/Gitlab aren't supporting it yet, but given how great it is for security, I think they have a big incentive to speed up support.
> ed25519-ek does not work on a Yubikey <5, for example.
That's no problem, since you can just generate an ECDSA key instead, but yes, not all keys have hardware support for all algorithms.
I can SSH to my AP, my home router, all routers at basically any ISP. None of those support this. Most of them probably never will, until they're thrown away and new ones bought in 5-10 years.
Bottom line: This can't be your only key. So why bother? Why not use PIV mode/smartcard/other, which does work with every single one of these billions of devices, because they have no server-side requirements like these.
Another tradeoff. Some users may be using a cheap or old token (without PIV support) or a token with a private key slot already used for something else. Now, with a software-only upgrade (on both SSH client and server), they can user their existing token for SSH authentication.
E.g. other auth, and GPG encryption - such as with `pass`.
Cheaper/ simpler FIDO2 products (from Yubico) exist if this feature is the only thing you want from a Yubikey. I don't know if that's a future Yubico are enthusiastic about, but I don't see much reason to hate it as an end user.
Even cheaper and even simpler FIDO products (from many vendors) exist if you only ever actually want this from one or two systems (e.g. a laptop and then one desktop workstation) so you don't need resident keys because the "non-resident" part lives on your workstation.
Was I wrong to make this assumption? Why would FIDO tokens be significantly cheaper and/or more popular?
If anything it seems like at first it's going to fragment the market even more.
Mac users do have built-in support which works the same way with certificates and is more stable in my experience:
https://piv.idmanagement.gov/engineering/ssh/#ssh-from-macos
My mistake was to assume that AWS saying "Your browser does not support U2F security keys." meant that Safari didn't support U2F keys. Given AWS's well-earned reputation for half-assing things I really shouldn't have trusted their assessment, but I did. My bad.
The fact that it didn't work out-of-the-box in Ubuntu 19 (needed a udev tweak) and a failing USB port on my laptop gave me the impression that it also didn't work out-of-the-box in Ubuntu 20 (which I booted from a USB key, hence the good port was unavailable), but I just tried it using my laptop's good USB port and a hub and I can now confirm that it works out-of-the-box in Ubuntu 20.
This works:
"ssh -oPKCS11Provider=/path/to/opensc-pkcs11.so user@host.com"
Or you place that in your ~/.ssh/config
Host *
PKCS11Provider /path/to/opensc-pkcs11.soI'd like to be able to, server-side, 1) require that the private key used for authentication be stored on a hardware device and 2) require user presence, but I've never read or heard that this is possible (granted, I haven't looked into too much).
If you have links to any documents that discuss how to implement this, I'd appreciate you sharing them. The only relevant documentation I can find is regarding FIDO/U2F support and even the release notes for 8.2 mention that "OpenSSH does not currently make use of this [attestation certificate]".
> 1) require that the private key used for authentication be stored on a hardware device
So for this you're going to need the attestation data, which as you observe OpenSSH currently doesn't do anything with. It is willing to stash it in a file, and because it's a certificate it's safe for the token's owner to send this somewhere. So you could construct a mechanism to examine the attestation file and decide whether to accept the proffered public key based on that attestation. e.g. "This is a genuine Yubikey 5C, so OK" or "This is a Crap Corp Funky Fake, no thanks".
I expect this would be a bunch of work, and I don't expect Free Software people to help build something to do it any time soon. But from what I can see it's possible with the components that already exist. Maybe somebody who really wants this will do all the work and put it on GitHub.
> 2) require user presence
The FIDO "options" bitflags have a flag for "user presence" (sometimes labelled UP). If this isn't set, user presence was not checked by the authenticator.
The FIDO authenticator includes this options parameter as part of the message it's signing.
So this means if a SSH client/ agent sends you an options field with UP set, but actually user presence wasn't checked it won't be able to provide a signature that matches. The SSH server doesn't need to do anything special except look at the UP bitflag if it cares (all WebAuthn servers are required to check this, it's on the long list of steps to perform WebAuthn authentication properly).
To be fair this isn't OpenSSH (though I'm sure they have at least somebody paying attention) it's FIDO itself that designed the signatures to also sign the user presence indication, they couldn't have avoided it.
That's basically the conclusion I ended up at but I was hoping you were aware of some recent progress that I didn't know about! Thank you, though, I certainly appreciate the response.
I don't see what's so extra hoop-y about telling SSH "use key from industry standard PKCS#11". That's literally what it's there for, and when Yubico added PIV support that instantly added support to multiple operating systems (incl Linux & Windows) where SSH keys "just work".
I can take a yubikey today from my Linux system, plug it into a Windows machine, and Putty with wincrypt support "just works". Because that's how it was designed.
EDIT: I see it now.
A FIDO authenticator has no modifiable state beyond maybe some sort of counter, it has a random secret key which makes it unique from its siblings, and that's it. No firmware update feature, no storage.
The crypto hardware is also simpler. FIDO was defined in terms of these nice compact elliptic curve schemes. The keys are small, the operations are simple, I'd be surprised if dedicated silicon to implement this isn't cheaper, and if you're just running it on a cheap microcontroller I'd be surprised if you can't get away with a cheaper microcontroller than you would need to implement RSA encryption and whatever else a Yubikey can do.
Finally in terms of volume, it makes sense to give all your 5000 staff a FIDO key. "Go to the enrollment page we built by this Friday. Enrol your FIDO key. Call the help desk if you have problems. From next Monday these are mandatory". You can lock down common corporate web SSO solutions with it for example, outfits like Duo will let you just check one box and you can now answer "Yes" to pages of questions your CISO is supposed to fill out every year.
It doesn't make sense to give out 5000 traditional Yubikeys. A dozen to a dev team for PIV? Maybe. But the lady who does 2.5 days per week in the accounts department? She doesn't need PIV. She can use a FIDO key to sign into the accounts web app though.
FIDO Security Keys are cheaper than FIDO2 Security Keys which is what I'd expect from what I wrote, they don't need any storage.
As far as I understand, private attestation is a specific design goal of WebAuthN, achieved by either sharing an attestation credential with at least 100 000 instances of a given authenticator or via cryptographic means.
There have been instances of authenticator vendors getting this wrong, but I remember reading that browsers will detect it and strip any attestation response in this case.
Is that extreme? Yes, but the upside to giving out attestation data just isn't there in most scenarios. It's like I have to step over broken glass to get a stale bagel. Yes these boots mitigate the risk from the glass very well but I don't even want a stale bagel anyway.
There are some scenarios where attestation makes sense. If you issued every one of your employees a genuine Yubico Yubikey then I guess it could make sense to insist on checking with attestation that nobody is using some homebrew device they built instead. But for general use? Even the tiny risk isn't justified, so it should be "off".
Here's someone much smarter than me proposing something you could do if you really care about the features from attestation but don't want people to give up privacy. If you insist on offering stale baked goods, here is how to clear up that glass:
https://www.imperialviolet.org/2019/01/01/zkattestation.html
The attack scenario here is malware on your computer pretending to be a hardware authenticator (during sign-up or 2FA enrolment) but really just emulating one in software.
If you're a James Bond villain and the plot's resolution needs to be saved for the final reel then this makes sense, you can't blow up the world 40 minutes into the story 'cos the audience knows that isn't the end. But real crooks don't want to build suspense, they're going to jump to the part where they win. Why play this long game?
e.g. issues that described here are avoided https://github.com/FiloSottile/yubikey-agent#alternatives
I can pop my yubikey into a plain vanilla install of Linux and run "ssh -oPKCS11Provider=/path/to/opensc-pkcs11.so user@host.com".
Or just put this into your ~/.ssh/config
Host *
PKCS11Provider /path/to/opensc-pkcs11.so
I agree that the gpg-agent way is yuck. But I still don't understand what you mean about the PKCS#11 way though. Yes, setting up the key required yubico tooling. Is that what you're talking about?
If it works with OpenSC out of the box, then that's because Yubico made it to work. I pretty sure that if you tried to use a publicly available PIV applet that does its PIV duties in accordance with the specs you are not going to have a good time trying to pair it with OpenSSH.
If yes, then why?