The fastest de-referer service... with AWS Global Accelerator(lifeofguenter.de) |
The fastest de-referer service... with AWS Global Accelerator(lifeofguenter.de) |
This exact setup is easier on Fly.io - our proxy layer runs in 20 regions worldwide with anycast, so your requests hit the nearest region and quickly terminate TLS there.
You can also run any Docker container, and either choose regions to run them in, or just set the min/max and ask us to start and stop containers in whichever region has demand, so your deployment follows the sun.
On ocassion, it breaks UDP protocols that are "connection oriented" (like QUIC and WireGuard, though both have built-in capabilities to recover).
There is no way to pin traffic to VMs (route / client affinities) or shape traffic.
100+ locations with GA, and two Anycast IPs (in two distinct "zones").
---
Alternatives to Fly on AWS that I know of:
Anycast on AWS without global accelerator: S3 buckets with transfer acceleration); (edge optimized) API Gateway to Lamba / Fargate; S3 + CloudFront.
AWS AppRunner + Copilot (which are comparable to Fly + Flyctl) can be geo-routed to nearest instance by DNS-based load balancing with Route53 (not anycast specifically).
---
Fly's killer feature (and why we are transitioning to it) is its cost-effectiveness and almost 'zero-devops' setup.
- Super cheap bandwidth ($2 per 100GB!)
- Free deploys (AppRunner charges for deploys)
- Free monitoring (versus expensive but comprehensive CloudWatch)
- Free orchestration
- Free anycast transit (expensive on aws)
- Cheaper, zero-touch, global/cross-region private-network across VMs in the same fly org (zero-muck: transit gateway, nat gateway, internet gateway, vpc private endpoints, iam policies...).
- Super cheap and fast disks ($0.15 per GB/disk!)
- Easier HA Postgres and HA Redis setups.
- GA's TCP proxy does not preserve source/client ip-ports (Fly can).
This is not a required feature for App Runner to function though. For example if you are using Copilot with App Runner you can drive the build and release to App Runner from your local dev machine, so there is no extra deployment charge beyond what it costs you for electricity to build your container on your own laptop. You only get charged for App Runner deployment automation when you are using AppRunner as a Github Actions / Jenkins replacement to do the Docker image build on the server side.
> On ocassion, it breaks UDP protocols that are "connection oriented" (like QUIC and WireGuard, though both have built-in capabilities to recover).
Yes, and no, in that QUIC and WireGuard do work consistently, it's not that they break. But Fly doesn't currently offer UDP flow hashing or sessions or pinning.
> There is no way to pin traffic to VMs (route / client affinities) or shape traffic.
No, but the system is built to obviate the need for this — you can choose which regions your app runs in and Fly will balance them for you based on the strategy you choose. I'm not sure what benefit is being missed out on by not having it — if there is a clear benefit that's not achievable under the current design we can make a case for building it.
> 100+ locations with GA, and two Anycast IPs (in two distinct "zones").
Fly lets you allocate and buy more IPs under Anycast, so more than two should be possible. Regarding the 100+ locations, that's technically true but irrelevant — GA doesn't serve requests, so they still need to hit apps deployed on one of the AWS regions (usually provisioned and managed separately). With Fly your app is running on the edge regions pretty much automatically.
The closest alternative to Fly on AWS would be (1) Global Accelerator pointing at (20) Application Load Balancers in every region, each backed with (1+) Fargate containers maybe? Would also need Lambda triggers to turn off traffic to a region if it wasn't worth running containers there, and turn them back on again.
That’s only “super cheap” if you’re comparing to AWS’s outright highway robbery bandwidth pricing.
The product looks too good to be true, and when you dig into a little deeper it seems like it isn't totally 100%.
Amazon RDS is something that I really trust, but I didn't get the same vibe looking at Fly Postgres.
Ultimately, we think devs are better off if managed database services come from companies who specialize in those DBs. First party managed DBs trend towards mediocre, all the interesting Postgres features come from Heroku/Crunchy/Timescale/Supabase.
So we're "saving" managed Postgres for one of those folks. For the most part, they're more interested in giving AWS money because very large potential customers do. At some point, though, we'll be big enough to be attractive to DB companies.
Their response was this: > Our goal in life is to solve managed postgres in the next few months. Either us managing, or with someone like Crunchy Data running on top of Fly. So “hold tight” might also be good advice.
This isn't a show stopper for me as they're toys, but I would be somewhat wary of moving critical production apps to it just yet. (Also, everything else aside from PG has been rock solid for me)
Almost every browser, except for IE, supports the `Referrer-Policy` header. We should be aiming to avoid additional redirects, not to make them faster.
Set the header and call it a day, and at this point browsers should default to same-origin. The only outlier is IE 11, with 0.5% usage, and it is so grossly out of date it's pretty reasonable to just dump.
I remember in the very early Internet trying to raise an alarm that a lot of people didn't realize the privacy implications of referral headers (run a website and you could find all sorts of crazy niche discussion forums, see the resources people were referencing, etc). I certainly am not claiming prescience, but it was amazing how little anyone cared. Mind you, I also once promoted the notion that browsers should only ever send strongly, expensively domain-specific hashed passwords from password elements, and that too was pooh poohed. Several billion pwned passwords later...
EC2s in many regions + Global Accelerator is a completely different pricing model to pay as you go serverless (and, depending on your use case and usage patterns, more or less expensive), and scaling is entirely up to you. It's cool to optimise for latency, but it would have been nice to have resulting costs and downsides (scaling).
3x t3a.small @ $13.72/month. = $41.16/month.
A 3 region single node web app could be done for under $60, dropping to around $43 with instance reservations. With a config this small there is no need for regional LBs, and even if you have multiple instances per region, GA has configurable internal flow hashing.
The dominant cost for any real site will likely continue to be bandwidth. GA pushes egress pricing up substantially in many cases, from 1.5c/GiB to as much as 10.5c/GiB, but this is unlikely to be a concern unless you're serving heavy images or video.
Autoscaling works the same as anywhere else. You can use spot instances, or even front ALBs with GA and build your whole app out of Lambda functions (although this would assuredly completely negate any latency benefit gained by using GA in the first place!).
If you dig +trace url.rw, you can see that the NS record for url.rw is held on ns-rw.afrinic.net, pch.ricta.org.rw, ns1.ricta.org.rw, ns3.ricta.org.rw and fork.sth.dnsnode.net. It's true that some of those servers are slower than others (for me, the AfriNIC server is 500ms whilst the dnsnode.net server is 50ms), but that shouldn't really matter because the TTL on the record is 86400. So the chances are that all the big DNS services (8.8.8.8 etc) should have the correct nameservers for url.rw in the cache already. Yes, if you're running a local-ish resolver, things are different... but most folks are dependent on Google, Cloudflare or their (large) ISP.
The actual A record for url.rw is held on AWS's DNS servers, with a TTL of 300. But AWS's DNS servers are fast.
I’ve read a few (dated) posts about bandwidth costs being extreme in Australia and Cloudflare would route around it, causing higher latency in that region.
Is that still the case though?
For example from Sweden I was usually routed via Denmark. I was Pro user, more PoPs are available to Business or Enterprise customers however.
But that was two years ago, Workers has grown ~an order of magnitude since then (both traffic and team size), and such a bug would be immediately noticed today.
The article author says that after the fix he still wasn't happy with performance, but I don't know what he was experiencing exactly. We've done a lot of other things to improve performance since then; it may very well be better today.
The performance was still very bad from a 95 percentile perspective.
"Cross-region IPv6 frontend IP configurations aren't supported." -- sigh.
It would be an interesting experiment to see what is the cheapest set of VM-like workloads that can be spun up in every region...
(CloudFront Functions can't generate body content, but it looks like this service works by responding with a refresh meta tag. So if you change that to a Refresh header you wouldn't need to write the body.)
CloudFront functions run on the 200+ edge locations of CloudFront and, according to the docs, have sub-millisecond startup times. So might be a viable option?
Cloudflare Argo is "more like" AWS Edge-optimized API Gateway.
The author also mentions Cloudflare and Google App Engine, but rejects these because on those services he chose to use the lambda-like compute functionality and wasn't prepared for the cold starts. He doesn't appear to have tried using Lambda on AWS, or dedicated VMs with Google. Thus it is a slightly apples-to-oranges comparison.
If it was me, I would set referrer-policy: origin (or no-referrer) header[1] and avoid all the overhead. Supported on all current browsers[2], and no additional costs or code to worry about.
Also, does it seem a bit insecure to anyone else to outsource referrer stripping services if your goal is to secure the content of the referrer from third parties? How well do you trust the middlemen in this case?
1. https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/Re...
Say your on example.com and click a a link to foo.com the browser will send the http header `Referer: example.com` in the HTTP get to foo.com, this means foo.com can then track how you came to their site.
What exactly was the bug though? bool effectively reducing hash(key) to 0 or 1?
GA is similar, but more like a global anycast routing layer/load balancer. You can have multiple backends, different regions etc, use a single public GA endpoint, and GA will route the request to your nearest backend.
You could use a GA endpoint as an origin for Cloudfront, I guess, to keep all traffic as near to the client as possible.
Servers that use geo DNS (EDNS-Client-Subnet) also cause considerable cache misses since the caching becomes very granular.
> irony (ˈaɪənɪ) adj: of, resembling, or containing iron.
In all seriousness, if we want to get nitpicking let's go back to the fact that the word comes from the Greek eirōneia, which means feigned ignorance, which in turn comes from the Greek eirōn, dissembler. I'd then argue that naming things silly names can be called ironic if the story world feigns ignorance of them being silly.
> I think we could debate this.
Wouldn't be worth both our time though.