New Bézier curves for vector graphics(ad8e.pages.dev) |
New Bézier curves for vector graphics(ad8e.pages.dev) |
1. Drag curve handles out to 1/3 of the length of the curve segment they control.
2. Eschew s-curves between two control points.
3. Don't turn more than about 90º between two control points.
I learnt this about a year into what is now a 23-year career as an Illustrator artist. It has served me well. You will note that the first interactive example on this page is asking you to violate rule 2.
"Béziers can't represent circles. If you try to approximate one by hand, it'll look lopsided."
If you try to draw a circle by hand, it'll look lopsided too. Any pro traditional artist will have a compass and a few circle templates in their kit. In Illustrator there's an ellipse tool one keypress away. I've been drawing at a pro level for about thirty years and while I can probably pick up a pencil and draw a better circle in a couple quick arm motions than you can in a bunch of little sketchy attempts, they're still nowhere near perfect, and they don't need to be.
I also draw about 90% of my paths with the Pencil tool, which just abstracts worrying all of this way. Unless you are doing very geometric work, or require the absolute minimum possible number of points, I feel that using the Pen tool to draw everything is about as sensible as writing a program entirely in assembly language. And if I do need to work under a tight point count constraint, then I will still draw it with the Pencil, then pull out Astute's Smart Point Removal tool, which does a great job of optimizing the heck out of my paths, much better than Adobe's tools for this.
As someone who's only ever used the pen tool, I feel mildly attacked!
Jokes aside, I think I agree with you if you have a tablet. I used to draw with a mouse back then, so I'd basically sketch on paper, take a picture or scan it, then use my mouse to pen over it. Sometimes I'd skip the sketching/importing steps, depending on what I'd work on.
Later when I could afford a tablet, I mostly left Illustrator/Inkskape behind in favour of just using Krita for most things. However, if I'm making a vector illustration today, I still use the pen tool... and the mouse, even if I have the tablet. If I were to work on something complex enough, I'd probably sketch it in Krita though, and then use the good'ol pen and mouse...
I'm by no means a professional artist, just do this as a hobby though. So, if my workflows outlined here have mortified you; apologies for that.
It does make intuitive sense for handles to be 1/3 of the length of the curve, as that makes the "speed" close to constant, but this is not the smoothest possible choice in general. In particular, it's not the best approximation to a circular arc, which by most reasonable definitions is the smoothest possible curve. I did the math[1] and found that there's a parabola around each endpoint that does result in an accurate arc approximation, and in fact may be easier to apply as it doesn't move around as the length of the curve changes. Rather, each of the parabolas can be applied independently.
Evidence in favor of this is O(n^5) accuracy scaling to approximate Euler spirals (which are also a good candidate for "smoothest possible curve" depending on the way you define that). I suspect, but haven't yet demonstrated, that there's some variational sense in which this choice is optimum, or at least to a first order approximation.
You can think of cubic Béziers as forming a four-dimensional parameter space (the parameters can be accounted as the lengths and angles of the control handles; in this scheme, the positions of the endpoints are not counted). By applying a rule such as 1/3 arc length, or falling on a parabola, that reduces it to a two-dimensional space (same dimensionality as quadratic Beziers, Euler spirals, and sections of rectangular elastica). I think two dimensions is too few, as it doesn't give you the ability to easily form superellipse shapes, a particular strength of cubic Béziers and quite handy for font design, as superellipse is extremely common in fonts. I think there may be some value in exploring a three-dimensional parameter space (which, among other things, is the count for general elastica) and have some ideas.
As for (2), the problem is that for s-shaped curves, cubic Béziers tend to put curvature maxima near but not exactly on endpoints. Since the curvature maximum is visually salient, you do better subdividing your curves so you can place them at joins. Other curve families, notably those based on elastica and Euler spirals, don't have this problem.
[1]: https://raphlinus.github.io/curves/2021/02/19/parallel-curve...
For example, to draw rough surfaces, point-to-point lines are the most efficient way, with a ton of points. For industrial geometric shapes, lines and ellipses become efficient. As the smoothness of the curve goes up, more derivatives become valid. But sometimes those higher derivatives are not useful.
This is why the parent comment likes the Pencil tool; it's optimal for high variation, because it is a local (smoothed) control of position, the zeroth derivative. The cost is some loss of smoothness, which likely doesn't matter for her domain, since her hands move smoothly enough.
I think the Pen tool would be a more competitive alternative with a better control scheme. For example, a Pen tool with local control would unify the Pencil and Pen: letting you draw jagged curves by holding your mouse down, and letting you draw straight lines and smooth curves by clicking. There would be no interruption of flow, as you can use either method freely to continue a curve. They should inherently be the same tool anyway, just with different numbers of derivatives.
Funnily I've seen a lot of programmers and math folks who express how truly, genuinely beautiful Beziers and the math behind them are. But I've never met an artist or graphic designer who didn't express some deep frustration at Bezier controls and how hard they are to work with.
There are even games[0] which make a mockery out of how hard Bezier controls are to use, where the game is purely using the controls.
Controls are just one side of the problem, in my view; the other side is that cubics are terrible for GPUs, they don't understand them - and I believe many of the best 2D graphics libraries today are not even fully GPU accelerated, e.g. Skia. There are folks working on compute shader-based approaches, where we try to shoe-horn this CPU-focused algorithm into GPUs and pray - but it still isn't really suitable.
The controls suck for artists, and the math sucks for GPUs. This is only true of cubics, if you restrict yourself to quadratics (although that brings other challenges), both the control issue goes away (you can just click+drag the curve!) and the performance issue goes away (quadratics are triangles, GPUs love them)
That's the summary of the talk[1] I gave at SYCL'22. In that talk, I didn't have time to present the downsides of my solution (which are real!) so if you watch it please keep that in mind - the talk is about the problem statement, not a solution. We are exploring a different solution today than what was presented in that talk. My overall point in there, though, is a solid one: vector graphics as they exist today suck for artists and GPUs alike.
The only reason we stick with vector graphics in their current form is because of SVG & compatibility with existing tooling. But isn't it crazy? We have new bitmap image formats all the time, and so few vector graphics formats.
In Mach engine[2] we're continuing to explore this space, end-to-end, from author tooling -> format -> rendering. I'm not claiming we have a perfect solution, we don't, but we're at least thinking about this problem. Kudos to the authors of this article for thinking about this space as well.
Making people draw Bezier curves just because "the file format uses those" is by far the bigger problem here.
https://en.wikipedia.org/wiki/Non-uniform_rational_B-spline
which you never saw because patents kept them off the markets until Beziers were completely entrenched.
I've taken "Show HN" out of the title now.
I don't think it is easier to manipulate with the last two examples, and I am guessing no actual graphic artist has read this or play with this before you publish it. To think of ways to improve bezier curves for vector graphics, you need to fully contextualize your thinking about the use case; this is not an academic mathematical discussion after all. Based on my understanding, your finding has no mathematical value as Pomax pointed it out, it is not new, it is an old math with a few constraints that is pre-defined, based on your assumption of what graphic artist wanted most of the time, which I agree is a good direction.
I strongly suggest for anyone to try to make a better vector graphics tool, try to draw a letter S with the new approach as a test case, you can choose an existing font to match. And know existing vector graphics rules, here is a couple as example:
- add anchor points at the horizontal and vertical extrema of your paths
- control points should not cross path with one another
Curves that doesn't follow these rules are valid, fine mathematical curves, but graphic artists has practices this for years to rule out them as bad for the purpose of graphic design. Again, the goal is to find the more much smaller set of suitable curves from the infinite realm of mathematical possibilities, for the context of graphic design
Both drafts have (exact) Euler spirals inside their parameter space, and thus circular arcs as well. I think that's a good criterion for a Bézier successor.
It's on the back burner for now, but I hope to get back to it, and am open to collaboration.
[1]: https://www.cmyr.net/blog/hyperbezier.html
[2]: https://xi.zulipchat.com/#narrow/stream/260979-kurbo/topic/H...
Many graphics algorithms (vector operations: scale, translate, rotate; raster operations like rasterisation and interpolation) specialise for straight lines (and hence also triangles), Bézier curves, circles, etc separately, rather than forcing everything to be a Bézier curve.
Often you don't need to _represent_ a circle. TrueType fonts (quadratics) and OpenType fonts (cubics) can't mathmatically _represent_ a circle, either, but does that mean no font has circles in it? Sometimes an approximation is pretty damn good.
Also conics (rational quadratic Beziers), which Microsoft has a surprisingly good article on[0], can represent circles.
[0] https://learn.microsoft.com/en-us/xamarin/xamarin-forms/user...
Alg :
given polygon P.
For each vertex V in P.
Get the midpoints of the 2 segs adjacent to V. M0 M1. Add those 2 points to the polygon.
Get the midpoint of seg(M0, M1). M2. Move V to the midpoint of (V,M2).
And here's the code for that
https://github.com/johnalexandergreene/Geom_2D/blob/master/C...
There's a version of that for open curves too, elsewhere in that package .
Mostly this is make it easier to do vector graphics on a gpu, which is why I'm interested in it, but I think it might be easier to understand.
https://pomax.github.io/bezierinfo/
I just now uploaded a worse C++ desktop version with saving and loading: https://github.com/ad8e/local-curves This desktop version is 5 years old. I think the web version is better. This github repo is only interesting if you want to copy code from it; it's not practical as a drawing tool.
The handle varies from 0 to full-strength, but the magnitude of the tangent vector stays constant. This means the handle doesn't decide the magnitude. Tracing the path in your head to visualize the changing tangent vectors would mean visualizing a competition between t^2, (1-t)^2t, and (1-t)^3, which I find difficult, even with some calculus knowledge.
As a bezier is just repeated interpolations, the tangents and their lengths can be derived from the intermediate interpolations [1]. This means that if you split a bezier near an existing control point, the new point will have wildly unbalanced tangents on both sides, and yet, connect into the exact same cubic curve.
So both your intuition and your confidence in it are... wrong.
Donald E. Knuth seems to think pretty highly of this decision:
“The quadratic has the great advantage that there's a real cheap way to render them. You can make hardware to draw a quadratic spline lickety-split. It's all Greek mathematics, the conic sections. You can describe a quadratic spline by a quadratic equation (x, y) so that the value of f(x, y) is positive on one side of the curve and negative on the other side. And then you can just follow along pixel by pixel, and when x changes by one and y changes by one, you can see which way to move to draw the curve in the optimal way. And the mathematics is really simple for a quadratic. The corresponding thing for a cubic is six times as complicated, and it has extra very strange effects in it because cubic curves can have cusps in them that are hidden. They can have places where the function will be plus on both sides of the cubic, instead of plus on one side and minus on the other.
“The algorithm that's like the quadratic one, but for cubics, turns out that you can be in something that looks like a very innocuous curve, but mathematically you're passing a singular point. That's sort of like a dividing by zero even though it doesn't look like there's any reason to do so. The bottom line is that the quadratic curves that TrueType uses allow extremely fast hardware implementations, in parallel.”
https://lists.nongnu.org/archive/html/freetype-devel/2000-01...
(I ported a tiny TrueType renderer from C to Ruby, and looked at what it'd take to add OpenType support, since OpenType uses the same container format; font file formats look like they were designed by a drunk student as a prank)
That surprises me, because Illustrator (especially earlier versions) is all about Bezier curves, and in my experience it doesn't take long before you start to "think" like the Pen tool. I don't recall working with an artist who couldn't intuit how they worked after creating with them for a few weeks.
That doesn't mean they don't stop being frustrating.
I will commonly wish there was a method to change a curve in a single drag in some particular situation, rather than 20 drags of fiddling with beziers, trying to figure out if adding another control point is necessary or redundant.
Just because you figure out the intuition behind them doesn't turn them into an efficient way of achieving results. Because the intuition of beziers translates poorly to our innate human/artistic intuitions of curves.
Splines with tangent handles are much better for font design as well, than splines without handles.
Splines defined by points and not tangents are useful for different reasons, and they’re not great if you want to have sharp changes of angle. You can do it by duplicating control points, but that causes some math mayhem in some situations.
In computer graphics people use the “Catmull-Rom” spline a lot, which is a type of interpolating spline that goes through the control points. https://en.wikipedia.org/wiki/Centripetal_Catmull–Rom_spline
People also use the B-spline as well, which is smoother and nicer than the Catmull-Rom spline, but it’s an approximating spline that doesn’t usually go exactly through the control points. https://en.wikipedia.org/wiki/B-spline
Both of these get used in CG for hair and fur - which is a good example of an application of curves that doesn’t require sharp angles along the splines.
It seems vastly more intuitive to place points rather than adjust handles. (And set directions for endpoints if the curve is open.)
And obviously a practical tool will provide the capability to join separate cubic splines at sharp angles.
Does anyone know of a GUI drawing tool based on this? I've always wanted to experiment with it. Because I've always wanted to either confirm that it's a great idea that we should all be using instead of beziers, or else discover if there's an immediately obvious reason once you try it out that it's a terrible idea.
The alternative, which obeys similar principles, is the Pencil tool. This simply spams out a ton of points to match what you draw. https://news.ycombinator.com/item?id=37460009 mentions that these points can be capably reduced, which could serve your purpose.
The parameter count has not gone up; it's equal to or less than usual Bézier control handles, because I forced the parameters to take specific values.
The part that is "new" about the Béziers is the new formula that selects one specific Bézier out of all the possible choices. I think this linguistic accusation is silly; for example, if someone discovers a new rock, it would be fair to call it a "new rock" even though rocks have been discovered thousands of years ago.
These curves are also unrelated to the file format; the curves are designed to fit how the user thinks about curves rather than be computer-efficient. For the tooling point, I think you are agreeing with me while arguing; I agree that there's no reason the curve should match what is used in the final product, and some of the other curve choices I considered require a complex conversion step.
In the analogy of rocks: we've certainly been discovering rocks thousands of years ago, but if you pick up the same rock that others have already picked up, from the same patch that we've been picking up rocks from for a long time, but using a different set of rules to decide how to pick the rock up, that's not a new rock. That's a new method.
So describing it as a new methodoly for finding appropriate Bezier curves, rather than finding new Bezier curves, would make it much more clear what you're doing. And new methodologies are always exciting.
The original article points out that quadratic Beziers have most of the desirable properties with very few of the downsides.
It used to be that the issue was that you would have to use significantly more quadratic Beziers to approximate something that a much smaller number of cubic Bezier's could do. This was a big deal when a font file might clog up a floppy disk.
Now that we're slinging around gigabyte patch files. Do we really care?
I usually just draw a quick simple line and tell Illustrator to rough it up for me. There's a lot of ways to do this; "use a custom brush" is a common one, so's "apply the Roughen effect". These will dynamically generate a buttload of virtual points in the vicinity of the basic path when it gets rendered; the editing view is still just a handful of points. Much easier to edit, much faster to draw. If I need precise, human-defined jagginess to a path, then I whip it out with the Pencil, and push it around with stuff like the Puppet Warp tool, which lets me drop a few pins into a complex set of paths, and distort it based on how I move those around.
Illustrator's Pencil tool actually performs a certain amount of smoothing on the raw positional input from the drawing tablet. There's a slider for how much it does this. I have it right in the middle of the range and it makes for a pretty nice compromise between catching every deliberate motion of my fingers/hand/arm across the tablet, and throwing away the little irregularities that I would be working hard to eliminate if I was working in pen and ink.
If I understand what you want, you'd probably really dig the Curvature tool. https://www.youtube.com/watch?v=xzilL2zvldo
Give me that + fast/efficient GPU-animated keyframes of those curves, and I'm 100% sold.
The computer can produce a near-perfect circle with Béziers for each 1/4 arc, and near-perfect circles are usually good enough. It's just inconvenient. It's also hard to manipulate the generated circle; the user might have a clear image of his head of the changed circle he wants, but pushing the control points to get there is not easy.
The mathematical "axioms" in the article are only attempting to provide a clean interface, so that the user can easily translate what is in his head to what the program creates. The circle axiom says, "The user often wants a circle, and also expects a circle, so let's produce the expected circle." There's no other mathematical purity involved.
