An IRC client in your motherboard(axleos.com) |
An IRC client in your motherboard(axleos.com) |
As a bit of a gag, I’ve made a graphical IRC Client that runs entirely in the UEFI preboot environment. It features completely overdone features such as TrueType fonts, a cursor, and GUI decorations.
I first started this project as I was getting a bit tired building a from-scratch GPS receiver, and wanted to make something relatively quick and lighthearted. As tends to happen, this took a fair bit longer than I anticipated at the outset!
A fair chunk of that time was spent on the visualisations in the post showing how scroll views are modelled and how they’re rendered to a static viewport. I really hope you enjoy them!
When I first began wanting to "stuff something in UEFI that really shouldn’t be in UEFI", my first instinct was a Twitter client. As it turns out, someone has already done a great job making this by using UEFI’s HTTP protocol! I therefore decided that whatever I made shouldn’t use HTTP at all, because that’s taken. I went with IRC since it sits on top of TCP and has the same social media feel that doesn’t belong anywhere near a preboot environment.
Seems to be quite the right place for me. How else would I get help on boot issues?
Of course I am joking. Sort of.
As a minimalist I do not need a GUI or a mouse. It seems UEFI already has more than I need.
Here is the Twitter client mentioned:
I've had an idea percolating in my mind for a while: Would it be possible to have VPN credentials stored in UEFI, and have a system reach out to a server for PXE network boot?
It seems like it would be a neat way of (securely?) allowing a remote system to automatically recover in the event of a nuked install that prevents proper bootup.
As PXE inherently trusts the LAN, and a LAN may have VLAN support, you can assign a default VLAN to the port which equates to the PXE server you want.
The PXE server can further configure by client MAC prefix, DHCP-assigned IP mapped to physical port number or similar. Configured systems can report status and/or other hardware identifiers to a server after installation and have default VLAN changed by the network fabric (more secure), or can actively request to join alternate VLANs (less secure).
With PXE, any information can be fed to the machine, not just VPN credentials.
This is how a lot of clusters are built, especially diskless (for CPU-bound operations) in this era of more-RAM-than-you-can-use.
All of the above should work with IPMI ports if the controller is flashed with PXE-enabled firmware.
I think it also emphasizes the complexity and capability of software that underlies the systems most people think about. I think it is a common misconception that your OS is the "lowest level" of the software stack, but in actuality, there is this firmware-ish code that truly owns your system. Sometimes it does a job and goes away, other times stays running the whole time your system is up, transparent even to the OS.
Sometimes, the attitude people have about this is along the lines of... "who cares, its just low level code to get my devices running, nothing serious can happen down there".
But knowing that you can get a whole IRC client down there doesn't make it too hard to imagine all the other nefarious things that could go on.
This is the spirit I come to HN for. Thank you for sharing.
> The most frightening realization hit me: there wasn't any reason behind what I'd done. I mean, I knew why I'd done it - I just did it because it would be fun. But I knew they would ask, "Why the hell did you do this?" and if I didn't have a good enough reason, they would probably throw me into a mental institution." -- Boyd Rice
Don't sell yourself short. There's a botnet C&C client project here!
OK the UI is a bit funny. :)
The other commenter is correct that the work loop typically revolved around booting a QEMU instance which ships my UEFI application. The main run script will regenerate an EFI filesystem that contains a fresh build of UEFIRC, then pass it to QEMU.
However, the overhead here can get a bit cumbersome when trying to build a GUI. I set things up such that the app could target either bare-bones UEFI, or a hosted environment that runs on my Mac. By flipping a build flag, my GUI toolkit would either draw directly to the UEFI-provided framebuffer, or would hook into my Mac's windowing system and receive/push events to that. You can see some of the overhead of this 'dual-target' approach in the app's entry point: https://github.com/codyd51/uefirc/blob/main/src/main.rs.
Parsing IRC messages also really doesn't need any accoutrements, so I developed those with a unit test suite running directly on my Mac - you can see part of that here: https://github.com/codyd51/uefirc/blob/main/src/irc/response....
Maybe the most useless comment but: that non-linear mouse movement (aka acceleration) is the very first thing I turn off when I boot up a new OS. It literally hurts my hand somehow. For example linearmouse is free for Mac. For Windows you can just turn off acceleration. For Linux its easy, obviously.
Using mouse acceleration stops you from learning to map a distance traveled by the mouse to a distance on the screen. I do think its more efficient in the long run without it. Something I learned to do from gamers, and something I think all gamers still do for a good reason.
I think you’d get a feel for it either way. Like how the throttle pedal in your car (probably) doesn’t map to a speed.
Because low-level applications like this were promised when UEFI was introduced, that's why. UEFI's creators went even as far as to dream of replacing the Linux-based Internet-only mini-OSes of some vendors which could be accessed by pressing a certain key during boot (though I don't remember what they were called).
I did see a video on YT that did a deep dive into this. I beleive you are correct they were originally stripped down Linux or other custom OSes but then eventually switching to UEFI apps before falling okay of favor.
The focus there was on adding TCP support to barebox though and it lacks your nice GUI elements. Only interface was CLI (which can be drawn on top of EFI GOP when barebox is built as EFI payload).
[1]: https://lore.barebox.org/barebox/20220401145902.GF4351@telli...
This does the hard bit of networking that QuickLook skipped though.
And then everything else is stuff the author did or linked in. Where's the firmeware bloat?
You are right and it is already going your way, even if you are not seeing it yet.
I understand that BIOS had limitations but I still think that UEFI is way too much.
I get the intent here, to avoid the issue of not knowing how large a buffer to allocate for your scroll view in the first place. But doesn't this still use way too much memory? Especially for something like an irc client, the scroll view will only grow as the program is used longer, and as such the number of tiles of rendered content will also only grow. You'll of course need to keep the textual history in memory, but that's far smaller than the rendered screen contents.
Proper GUI toolkits (disclaimer: I have worked with few, and only a little at that) handle this, I think, by not considering the scroll view a canvas to draw stuff on, but instead a thing that you can place widgets on. Each widget has access to some data that allows it to re-draw its graphical content at some position on-screen, and the scroll view forgets rendered content far outside the visible area, and asks widgets to re-draw their content whenever they get scrolled onto the screen again.
Of course, you could expect requests for even more over-engineering ;)
Cool stuff! As someone else mentioned, you missed April 1st.
To resolve this while maintaining the spirit of the design, I think two representations need to be kept: one for the rendered pixel data, and one 'out of band' representation (such as the textual data - you also highlighted this in your comment).
The idea is that, when the pixel buffer memory gets too large, some of it can be dropped. When it scrolls back into view again, it can be repopulated by the secondary representation. What I don't like about this is how it doesn't feel like it generalises well - you always need to be able to store the secondary representation, and have code to redraw it.
I think the concept you suggested is a really good one: just make sure everything that's drawn is its own 'encapsulated' widget with its own drawing logic, and you can ask it to render itself whenever that's convenient. I'm grateful for the input here, and think I will end up switching to this sort of approach in the future.
But if it's fun, go ahead! Perhaps it's helpful for axle too. :)
The animations are made using a small animation system that I made for this post. This system has two useful properties:
1. It allows me to animate whatever property of the object I’m interested in (alpha, frame, etc).
2. It allows me to set up other work to be triggered when the animation has reached a certain completion threshold, which lets the animations flow into each other. This is how (for example) the grid lines ‘cascade’ in after each other.
The 3D animations are also primarily HTML canvases, and I used Three.js to place them as textures in a 3D scene. I have some logic to map the coordinate system of the canvases to the 3D scene, so that I can draw the connective tissue between the canvases and run animations that operate on objects both on the 2D canvases and the 3D scene.
A real tour de force of DSP - really cool stuff, and well-written
Biggest gripe with my home lab setup is managing when something does or doesn’t PXE boot.
Plug anything in and PXE boot it and it wipes the drive, does a scripted Debian install chained to an Ansible playbook that eventually installs k3s, discovers the rest of the cluster, and joins itself to it. So 0-click and 10 minutes from plug in to node in the cluster. If anything breaks, just PXE boot it and wait 10 minutes and it’s back. If anything needs updating, just PXE boot it and wait 10 minutes and it’s back.
Except… these are a bunch of tiny PCs on a high shelf in my utility room. Selecting the boot order is a _project_.
Never even thought about handling this from the network end. Either swapping the untagged VLAN on the switch or setting DHCP options per MAC address would let me handle this without getting up from my desk.
Every once in a while I look for a cheap remote KVM I can use as a crappy IPMI stand in, either with RJ45 or WiFi. I haven't looked in a year or so, but at the time the options I found all seemed far more costly than I would have hoped (the pi based ones seemed interesting but once you add the requirements together it wasn't cheap enough to be attractive to me for a home use). Server class equipment with built-in IPMI is quite a bit more expensive. I just want something affordable to put in front of a NUC to make dealing with it easier in some instances. You could stick some refurbished old KVM device in front of it to support multiple systems on that one KVM as long as they were in close proximity.
Seems like you could benefit from that as well (but in your case you might get a workable solution out of switch config though).