Ask HN: Is there any software you only made for your own use but nobody else?

246 points by Crazyontap 1 year ago | 468 comments

Just wondering if any of you has created any software that is meant for your use only and will never see the light of the day for anyone else.

What does it do? How did you make it? How much time you spent making it? How often do you use it?

rowofpixels 1 year ago |

I built a hydroponic garden as a covid hobby. I wrote software to maintain the garden, water it on schedule, apply ph changes to the water, turn lights on / off, humidify, as well as monitor statistics (temperature, humidity, water temperature, water ph, water conductivity).

Rough guess would be that I spent 50 hours actually working on the software.

There's a handful of raspberry pis involved. I wrote everything in elixir and used https://nerves-project.org. The dashboard is written with phoenix live view. One of the raspberry pis is the "brain" and basically runs the dashboard and controls devices. The devices are all in an elixir cluster. I also run timescale db for some basic history of metrics.

Once I start a grow I don't use it that much actively, but it passively runs all the time. I check in every few days or week to make sure nutrients are looking good.

I've grown strawberries, lettuce, jalapenos, and cayenne peppers.

aperrien 1 year ago | |

What do you use for valve automation? Is it a commercial or custom part? I've been wanting to do the same myself, but I hear there's all sorts of quality issues with automatic valves.

rowofpixels 1 year ago | | |

I originally bought some solenoid valves to experiment with, but ended up simplifying my approach. I use a submersible pump that is plugged in to power. I can just automate turning on/off power to that outlet (I have two TP-link / Kasa HS300 strips). The nutrients / water are in a tank below the tray of plants, so when the power is "off", gravity brings the water back through the pump into the tank again.

throwup238 1 year ago | | |

Not OP but I use motorized ball valves from Amazon [1] which are hooked up to a four way water hose manifold to create four different zones. It's wired up to an ESP32 that controls them with relays via GPIO, using the ESPHome sprinkler controller module (which does pretty much everything OP's code does). I've never had a problem with them and the last time I even touched them was over a year ago. They're pricey but you can DIY them.

The usual sprinkler valves at hardware stores need quite a bit of water pressure to change state which is probably what most people have a problem with, especially if they're trying to feed them with the kind of pumps they get at hydroponic stores.

[1] https://www.amazon.com/Motorized-Stainless-Electrical-U-S-So...

samtho 1 year ago | | |

Not OP, but I made one of these for my partner and I’s bonsai garden.

I use standard 3/4” sprinkler valves from the big box stores, connected to a manifold via unions on each side. This enables me to swap if needed, but these are ruggedized and will last a while. They do take 12VAC, so you need a transformer and use relays to turn them on, but they work very well.

Gormo 1 year ago | |

Any chance of making your code public? I'm thinking of dabbling in aquaponics in the near future, and what you've built sounds almost exactly like what I would end up working on myself.

j45 1 year ago | |

This sounds like a great project to reconnect one with growing food… with some perks.

Appreciate you sharing, helps share others are thinking about it too.

Is there a reason you went with hydroponics vs aeroponics?

rowofpixels 1 year ago | | |

I know next to nothing about aeroponics - I did read about aquaponics a bit when I started, but hydroponics seemed the most accessible for me.

I've loved making my own crushed red pepper. And there's something fun about growing plants in the middle of a cold snowy winter in the basement.

throwup238 1 year ago | | |

In practice aeroponics is very fragile. All it takes is a failure for a few hours for roots to irrecoverably dry out and kill the plants. Most hydroponic methods give you a safety margin of days or even weeks.

abrookewood 1 year ago | |

Any chance we can see the code? I'd love to do some work in Nerves and that sounds like the perfect project.

neoecos 1 year ago | |

Did you published this project, sounds interesting just to see the basics of nerves in a real small thing ?

sloaken 1 year ago | |

That is AWESOME! I would love to see what you did for this. Even more I would love to build the same.

stoneman24 1 year ago | | |

I agree, a blog post or other description would be great and really inspiring for my own projects.

robxorb 1 year ago | |

How does it automate ph changes to the water?

rowofpixels 1 year ago | | |

I use two pumps from Atlas Scientific - one for a jar of base and one for a jar of acid. I have a sensor for PH so I can see in the live dashboard, and can click a button on the dashboard to disperse a set number of ml to the tank. I should have been clearer - PH is the one thing I didn't "close the loop on" because it'd be a little volatile. For instance when you first add nutrients to the water the PH drops steeply but stabilizes over hours or a day, I didn't want to respond too constantly to those changes. I should spend more time on this aspect though and maybe just have notifications for when it makes decisions.

throwup238 1 year ago | | |

Not OP but I use aquarium peristaltic dosing pumps that pump General Hydroponics pH Up/Down solution controlled by a Raspberri Pi with an Atlas Scientific pH sensor.

galdosdi 1 year ago |

Reminds me of a classic story that makes a good programming parable:

Back in 2011, my girlfriend was working at a catering company that announced shifts via a webpage and workers had to sign up for them. Other workers tended to pick them up very quickly, so it was hard to get too many shifts.

I wrote a quick web scraper to automatically accept any shift offered and email her.

For a couple weeks it was great, suddenly she had all the work she needed.

Then one day she woke up late to find a voicemail telling her she was fired.

Earlier that morning the script had detected a last minute job announced just an hour before start time and immediately accepted it, resulting in her not showing up to it. I had not accounted for the possibility they would announce a job so last minute, since it had never happened before.

roughly 1 year ago | |

As they say, Unix gives you enough rope to shot yourself in the foot.

omerhac 1 year ago | |

Great story. Did they fire her for that one time she didn't show up? Thats tough

galdosdi 1 year ago | | |

This was in 2011, just after the Great Recession. It was a tougher labor market then. It was normal for low skill jobs to fire people on the spot for no show / no call. The labor market has changed in that sector since then.

qup 1 year ago | |

How'd she take it?

galdosdi 1 year ago | | |

Well, while we obviously were both upset and sad about the situation, she was very understanding, for which I am thankful. We were in it together. It helped that she managed to find a slightly better job pretty shortly thereafter. Nevertheless I felt really guilty about it and as a result the obvious relevant professional programming lesson was instantly and indelibly burned into my brain: you can fix bugs, but you may never be able to undo the real world user level consequences of the buggy software's time in production before being fixed. I was just out of college then and it solidified more respect for the power of the machine.

65 1 year ago |

Almost all of the software I make in my free time is for my own use.

My most used tool I have is a note taking web app that automatically saves markdown files to S3. The most important feature I added was a little button that would automatically make a note for the current day, and put it in the daily notes folder, all sorted and organized. I also have full text search which is very helpful for finding old notes.

I also use an RSS reader I made. Instead of just showing you the text of the page like a standard RSS reader, it proxies the web page so you can read the article directly from the website, but with the added benefit that since it's a proxy, I can control all the HTML, CSS, and Javascript on that page.

Another daily one I use is a random background music playlist for Spotify that is auto generated daily. Using the Spotify API you can find random music, then find random instrumental music from that random music. I use this to discover new songs to listen to while working.

Basically, making your own software is fun. Making production software is much less fun. I don't need to worry about a million things when I make my own software. Sure, I make $0, but if I spent months making, for example, my notes app production ready, and tried marketing it, I'm guessing I'd still be sitting at $0.

fardinahsan 1 year ago |

Yes. I made two recently.

- TalkToYoutuber[1]: Download the transcripts from a youtube channel and hook it up to gtp4 with RAG to let me "talk" to youtubers. There's a bunch of youtubers who have useful knowledge to share, but no blog or wiki, so semantic searching their video transcripts is the next best thing.

- YoutubeThumbnailSearch[2] - Embded all of a youtube channels thumbnails using CLIP and search them using text. I often need to search through news channels with 10k+ videos, often in foreign languages, so not having to rely on the title or transcript but the video thumbnail helps. This is a much more niche usecase tbf.

I am thinking of making a scaled down version of [1] so I can "talk" to long videos, like conference speeches or university lectures. Should take an hour or two to cook it up since it will reuse most of the code from [1].

---

[1] https://github.com/FardinAhsan146/TalkToYoutuber

[2] https://github.com/FardinAhsan146/YoutubeThumbnailSearch

magicpin 1 year ago | |

Something like talktoyoutuber would also be very useful for certain discord servers. They'll have a lot of knowledge on something but will gatekeep it with "just use the search." and they'll refuse to build a wiki or really engage in any kind of organization.

fardinahsan 1 year ago | | |

I can cook it up if it would actually get some users.

Ultimately, I want to make a tool where you can plug in any arbitrary document store/scraper to an LLM with RAG. But I think we are still not there yet in terms of all purpose scrapers.

stogot 1 year ago | |

> I am thinking of making a scaled down version of [1] so I can "talk" to long videos, like conference speeches or university lectures. Should take an hour or two to cook it up since it will reuse most of the code from [1].

This would be useful to me as well. If you do end up making it, could you reference it on your existingGithub

fardinahsan 1 year ago | | |

Yeah, I'll add a reference to it. Are you watching the repo ?

floydianspiral 1 year ago | |

this is a really cool project, you should send it to people at youtube, get a job there and implement this in their sidebar...

fardinahsan 1 year ago | | |

The projects are dead simple. I think if Youtube wanted to, the would have implemented this long back. It's probably a legal landmine and financial tar pit. But thanks nevertheless.

boricj 1 year ago |

Over the past two years I've been working on tooling that allows me to delink programs back into object files. What started out as a bunch of Jython scripts is nowadays a full-blown Ghidra extension that can export working object files from a program selection in two mouse clicks. I'm using it as part of a video game decompilation project, but it also enables a whole bunch of other use cases I've documented on my blog.

It's not that it is meant for my use only (any capable reverse-engineer familiar with Ghidra should be able to pick it up and use it) nor that it will never see the light of the day (it's open-source). However, it is such an esoteric capability and outright heresy according to computer sciences that I'm having a hard time just finding people who can wrap their heads around the concept, let alone people who would actually want to use this. Simply put, it's so far out there that I don't even know where or how I could even advertise it in the first place, which makes it de facto for my own use only.

A couple of people did end up reaching out to me in the last couple of weeks about it, so it might be on the cusp of sprouting a very tiny user base. Still, I've made it for my own use and until very recently I've never expected anybody else would use it.

If someone wants to check out the dark magic: https://github.com/boricj/ghidra-delinker-extension (disclaimer: might give nightmares to linker developers).

5pzv1kn3 1 year ago |

I’ve developed several webapps to help our family and personal life:

* Vehicle Maintenance Tracker: Logs all vehicle maintenance and sends reminders based on time or mileage for upcoming tasks. This one is probably one of the most used and useful of everything I have made.

Lend/Borrow Tracker: Keeps track of items we've lent or borrowed, to/from whom, and when. We use it most for books, but it can be used for anything.

Library Book Manager: Lists all the books we checked out from local libraries, displaying their cover images and ISBNs. Using a barcode scanner, we can quickly "check in" books on return day, accompanied by an adorable "ding ding!" sound recorded by one of my kids. Really beats manually searching the paper printout. It can be used on multiple devices at the same time - the checkin status of each book is synced live between all users, so each kid can find and check in their own books.

School/Home Lunch Manager: Displays the school lunch menu alongside each of my kids’ names. We mark school/home lunch days at the start of the week for easy morning prep.

Sickness Documentation: Tracks sickness details like symptoms, medication, temperatures, and timelines, helping us coordinate how we are going to take care of the kids when they are sick.

These apps, along with a few others not listed here, run on a server in my home, accessible only within our network (in home of via a VPN).

ssalefske 1 year ago | |

Very interesting! We’ve always tracked medications on paper, but would love the option to add in reminders, etc. Would you mind sharing any of these projects if you have them on gitlab?

mikelevins 1 year ago |

Yep.

I wrote bard, a Lisp that combines features of Dylan, Common Lisp, and pure-functional languages purely as a long-running experiment in what I could do to make programming more fun for myself. I subsequently used two versions of it in client projects (to prototype some solutions and to compile them to data used by the delivered product; nothing delivered to the clients depended on my weird Lisp dialect).

I wrote a tool called nym to help generate names for characters and other things in games and stories. It's enough fun in itself that I sometimes just play with it.

I wrote another tool called model-namegen to generate names with stricter constraints for science-fiction stories. Those names are mapped uniquely and reversibly to 64-bit integers used in the story to generate names for machine intelligences. I also wrote a prototype for a 3D multiplayer game called The Fabric set in the world of those stories, and wrote code to generate clusters of colored cubes for use as avatars representing the AIs. Each character's unique ID is mapped to a unique name and also to a unique 8x8x8 configuration of lighted cubes. An example name is Ixion Eleven Chrysotile, the name of the autonomous robot who is the narrator of my Fabric stories.

Following is a link to a very short movie of the avatar for the character Miriam Five Bittersweet Earth: https://evins.net/downloads/miriam-5-bittersweet-earth-2-2.m...

I wrote a couple of versions of a library for Common Lisp to make certain functional programming idioms I like more convenient for me in Lisp. They're called folio and folio2.

I wrote a library called taps that similarly makes use of Richard Waters' SERIES package for Common Lisp a bit more convenient for me. Actually, taps started as part of folio and I ended up wanting to use it on its own often enough that I broke it out separately.

I've written several little tools for calculating and keeping track of information that's useful for friends-and-family gameplay.

I've written several other libraries and applications purely for the purpose of exploring some idea or other that interests me. For example, beasties was a pond-life simulation that I used as a playground for recreational genetic programming. Panels was an experiment in user interface that used a constraint solver for laying out windows and widgets, and an append-only log of all UI events together with a query engine and a knowledgebase. Panels could display graphic representations of recent user activity and retroactively define mappings from sequences of events to user-defined handlers. It operated on the principle that everything detectable that a user did potentially had some purpose, even if we don't know what it is, so we should remember all the user's actions and offer them the opportunity to define what they meant.

I've also written a few little things primarily for the purpose of helping friends and family with this or that task.

I've spent a lot of time over the years on things like these. As you would expect, they've taken varying amounts of time and I don't really keep track of how much. I use some of them (e.g. taps and other pieces of folio) almost every day, and others intermittently. A few of them (such as beasties and panels) I haven't really touched in years now.

BoppreH 1 year ago |

I have a 3-letter domain that I use as my personal playground (think "xyz.com"). It features:

- One-click anonymous upload of text, clipboard, and files. So from any computer, I can visit xyz.com + ctrl+v to upload the clipboard, write notes to myself, drag and drop a file, etc. It's a risky feature, but there's nothing to attract attention and you don't even get a URL back.

- Authenticated sessions see a list of uploaded files, with buttons to copy link, download, delete, or generate QR code. There's also real-time notifications for each upload.

- Simplified RSS feed reader[1]. It scans my feeds every 10 minutes, and displays the URLs of new items. It has one button, that opens all URLs in new tabs and marks them as read.

- A Server-sent-events channel[2], and a UI that displays visitors in real time. The channel allows me to send redirects/file downloads to any visitor, so I'm constantly asking people to visit xyz.com when I need to hand them something digitally. Visitors are color coded with randomized backgrounds for identification.

- Youtube video downloader (powered by yt-dlp), along with audio extractor and pitch+speed correction for songs.

- Authentication is by approval from an already authenticated session (usually my phone). In the worst case I can edit the text file via SSH.

I add or remove widgets according to my needs. At one point I had chat integration with Facebook+WhatsApp+Telegram (got me banned from WhatsApp), radio player (replaced with Spotify), and even balances by scraping my bank accounts, credit cards, and Steam (removed after a bank started asking questions).

The whole thing runs in custom pair of Go and Python servers, developed slowly over the last ten years, and I use it multiple times a day. Feels like a digital tree house, messy but fun and useful.

[1]: https://github.com/boppreh/feeder

[2]: https://github.com/boppreh/server-sent-events

Edit: people have found it and started spamming uploads of "HELLO FROM HN". One IP looks Swedish. Well, Hi! But I'm taking it down for a few days to avoid tempting more people.

And shoutout to the Go team, that server has been rock solid and 100% backwards compatible over the past ten years.

AlbinoDrought 1 year ago |

I would add videos I liked to the "Liked Videos" or other playlist areas on my YouTube account. I'd return to find the video months or years later, only to see that it may have been removed (usually due to copyright or other channel closure). This video removal issue also extended to other platforms. I found this annoying.

To avoid this, I made an extremely simple video platform. I save all my videos there instead. It's still my hobby project that I use the most.

The code is at https://github.com/AlbinoDrought/creamy-videos

There's an optional youtube-dl importer UI at https://github.com/AlbinoDrought/creamy-videos-importer (separated for easier updates)

The importer repo also contains a Firefox extension so any target can be right-clicked -> Import to Creamy Videos -> Select a set of tags -> sent to the importer UI, youtube-dl, and then eventually video storage: https://github.com/AlbinoDrought/creamy-videos-importer/tree...

guessmyname 1 year ago |

Financial Tracking Application.

I’ve been developing this app for five years. During this time, I’ve integrated it with all my bank accounts to automatically fetch data needed for creating daily graphs and analyzing trends. This allows the app to generate predictions for long-term net worth growth.

Additionally, I’ve integrated the app with Yahoo Finance, Fidelity, and Morgan Stanley to monitor my Restricted Stock Units (RSUs) and Employee Stock Purchase Plan (ESPP). This functionality helps manage tax responsibilities on capital gains and compare growth with other job offers that include RSUs from different companies. For instance, I can answer questions like, “What if I had chosen to work at Facebook instead of Apple?”

The app also extensively utilizes data from credit card transactions. It includes charts listing new restaurants visited in the last month, tables tracking monthly subscriptions, algorithms to detect discrepancies, and numerous other features.

While I’ve considered turning this into a business, my current job keeps me very busy.

arjvik 1 year ago | |

Would love to see how this works, or at least hear about how you're able to pull this off!

I've been carefully keeping double-entry-accounts of my personal finances in GNUCash, but I don't have anything hooked up to my accounts file. I was originally hoping that GNUCash would have some way of letting me sum up a certain combination of accounts to calculate i.e. "how much float I have currently," but even that doesn't seem to exist... so my first order of business is probably that sort of simple custom repoting. But would love to make use of the data and create some more actionable reports!

mimischi 1 year ago | |

God, I’d be curious to see what you’ve got there. But no way in hell I’ll know how to guess your name to lookup the details.

monitron 1 year ago |

I wrote my own home automation platform. I started >10 years ago when the existing options were pretty disappointing to me. It’s a web app that runs on wall mounted tablets in my house as well as on my and my family’s phones and computers.

It handles lights, fans, cameras, sensors, locks, doorbells, speakers and TVs, HVAC and more. It runs automations based on time, weather, presence of people, and other events. It tracks energy consumption, sends alerts, etc. There’s a strong focus on local control (as opposed to cloud).

My favorite thing about it is that the client and server run from the same codebase and share state over a WebSocket connection. I’m still working on it occasionally but mainly it just runs quietly and my people seem to like it. The whole thing is configurable (connectivity, behavior and interface) so theoretically it could be used by someone else, but for many reasons I doubt it ever will :)

arnaudsm 1 year ago |

As a freelancer I invoice in multiple currencies, and I couldn't find a program to generate them that wasn't an overly complex $100/mo SaaS.

So I build a little cli to generate my invoices. 100 loc and super simple.

I miss the 70s when programming was the default way to solve problems. Excessive abstractions and proprietary software often slow us down.

6510 1 year ago | |

> I miss the 70s when programming was the default way to solve problems.

When you get deep enough into writing a custom tool it starts doing things a generic tool would never accomplish (or it would have to be bloated with features no one needs) Hard coding values and constraints for personal use makes such elegantly simple interfaces.

For example, my agenda is a beutiful boulderdash-like grid of icons. The data is a set of arrays [1,2,1,0,0,1,1] and an object for special days. There are no setting, it has zero buttons to press.

I've made countless silly things other people could use if only they knew it existed.

https://go-here.nl/real-salary-calculator.html

https://title-spider.go-here.nl

https://salamisushi.go-here.nl

endless things I've made for personal use. I think something like 60% needs one or two lines of love to work in 2024.

epolanski 1 year ago | |

My (polish) bank gives invoicing software for free and obviously you can put whatever currency you want.

Bank is called millenium bank.

pedrosorio 1 year ago | | |

Millennium bank is Polish TIL

What's up with Portuguese and Poland? (Millennium, Biedronka, what else?)

beattheprose 1 year ago |

Web service that turns a YouTube channel to a Podcast-compatible RSS feed, just by changing the URL from https://youtube.com/XYZ to https://$SERVICE_URL/XYZ.

Use it almost every day. It’s nice to keep up with channels I care about while escaping the algorithm.

Something I work on-and-off on. Could be interested in open-sourcing it fully if folks are interested in helping out. Im a pretty junior engineer, so work is slow and I’ve never been satisfied enough with the code to publish yet.

joeyagreco 1 year ago | |

You should open source this!

SwiftyBug 1 year ago | | |

I second this! This is somehting I'd love to use.

kingofthehill98 1 year ago | |

I would totally use this no matter how bad the code is.

slenk 1 year ago | |

Would love to see this!

ycuser2 1 year ago |

I made a small tool that takes a screenshot all 5 minutes and stores it in a password protected zip file, but only if something has changed on screen.

Sometimes I go through the old screenshots and get nostalgic as the oldest are 10 years already.

I spend so much time of my life on my computer, so why not take photos of it?

robxorb 1 year ago | |

That is so cool! It'd be amazing to see a timelapse of the past ten years of someones computer life.

Assuming 8 hours/day average of active screenshots every 5 minutes, would be (8*60)/5 = 96 shots per day. Times 3650 for ten years is 350,400. Divide by 60fps is 5840 seconds, by 60 is 98 minutes. So a decent movie length, as a single video.

Though, I imagine it'd be unfeasible to go through every screenshot and remove sensitive information.

(At a rough ballpark: if it took 20 seconds on average, to analyse and either bin or selectively-censor each screenshot, it'd take about a full working year, 8 hours per day.)

0xfeba 1 year ago | |

Ha, MS has Recall which is like this ... but obviously it's had problems.

skydhash 1 year ago | | |

There are things you can do with yourself that you’re not OK with strangers doing them for you.

That’s pretty much the issue with privacy. A lot of feature feels invasive because the company don’t want to remove themselves from the operations. People don’t usually care because they either don’t understand the impact or they trust the government and the laws to reign in malpractice.

KomoD 1 year ago | |

Kinda like https://timesnapper.com/

barrenko 1 year ago | |

Hmm.

thiagoperes 1 year ago |

I created my own translation app using llama3-80b, I call it "expat translator": I live outside of my home country and always struggled with using translators like Google Translate because they don't tell you if the way you're writing something feels natural in the other language. It gives me some pretty good results and I also instruct it to give me rewrites for informal and professional use, so I don't sound weird on WhatsApp for example.

It uses an on-device model for language detection and results are sub 0.3s thanks to groq

If someone wants to try: https://testflight.apple.com/join/GBxPMw2h

aadhavans 1 year ago | |

As a sort-of-expat myself, I can definitely relate to this struggle. Out of curiosity: does the language you're translating to have a non-latin script? I've found that llama often struggles with those.

dathos 1 year ago | |

So this app would not be for regular immigrants or travellers?

ww520 1 year ago |

Lots of my software are for myself. To algorithmically generate wallpapers for my phones and computers, I hacked up a forth-like mini language running on GPU to make generative arts easier. Some samples https://news.ycombinator.com/item?id=40413433.

To make recalling my web browsing easier, I built a browser extension that shows my browsing related information on one page. Pressing the shortcut key Alt-L brings up a page showing my frequently visited sites, my open tabs, my bookmarks, and my history visits. Searching and navigation are super easier. Searching can combine terms with logical operators. The hardest part of the project was getting fast performance when rendering a lot of data.

I use this extension daily, and I put in some effort to polish it as a releasable software.

https://chromewebstore.google.com/detail/one-page-favorites/...

https://microsoftedge.microsoft.com/addons/detail/one-page-f...

https://addons.mozilla.org/en-US/firefox/addon/one-page-favo...

joseph_b 1 year ago |

Circa 2018, I went deep into investigating ADHD and whether I had it or not. I ended up "interviewing" a rather diverse group of people, from authors, teachers, and ADHD coaches to psychologists and other doctors. During this time, I was reaching out to many people, managing schedules and appointments, and eventually publish the interviews. The "reach out" to "interview" ratio was something like 100:1 and took a lot of management.

This was my part-time hobby, I guess. My full-time gig is a software engineer at a bio-tech company.

So, I wrote some basic web software (PHP/Symfony) to manage and track the whole process. It took around 3 months to write the code, though there was no set beginning and no set end. The code was started when I became overwhelmed with the manual aspect of tracking everything. The code was done when I figured I had done enough to manage and automate the process.

Talking with a few people after the fact indicated very high interest in the software I had written. And thus began the journey to convert it to multi-user.

I started on the multi-user conversion and, maybe because I tried to make it do everything and then some, have not since finished it. The code is on my private GitHub, partially converted to multi-user, slowly rotting away (needs library and core updates).

What does it do? Manage the process of cold lead acquisition, follow-up interactions and onboarding, and eventual publishing of the resulting interviews.

How did I make it? PHP/Symfony.

How much time spent making? About 3 months in my spare time.

How often do I use it now? No longer used.

costco 1 year ago |

40 lines of C to control brightness on Linux in the way I like (Pressing brightness up key should make it go up more than pressing brightness down key makes it go down). It took 20 minutes to make. Used as a keyboard binding.

TODO list program and the list is periodically printed on my desktop with conky

Software to automatically book reservations at good restaurants on Resy. Supported proxies, multi account, automatically running every day and getting reservations in a certain time range, and even something with a USB GSM modem to respond to the confirmation texts you get a day before. Used it until I got banned from Resy :\

Family photo search using CLIP (actually uform) and face labels from Synology NAS. So you can search “winter +christopher” and it will only show pictures of me and sort by the most winter related ones. You can also filter out certain names, search multiple names, click on an image to get images most like it, filter by year, or any combination thereof. Took a couple days to make with Flask, pgvector, and some code to scrape data from the Synology web interface. My family uses it sometimes too though.

cocodill 1 year ago | |

any chance to opensource your foto searching?

walthamstow 1 year ago | |

Love the Resy one!

explorigin 1 year ago |

I once ripped the corner of my windows install code sticker. I was missing the last 2 characters. I wrote a script in SikuliX to bruteforce the remaining 2 characters. It took about 4 hours to run but in the end, I got the full valid code.

metadat 1 year ago | |

SikuliX looks quite useful.

http://sikulix.com/

bengarney 1 year ago |

I wrote a tool to do automated QA on internet video (HLS/DASH, tech used for Netflix, YouTube, Twitch, etc.).

It evaluates streams against a database of 100 or so "quirks" that identify either general issues or issues that will only manifest on certain player libraries. For instance, specific "in spec" encodings which are actually non-standard in practice get flagged.

Built on TypeScript/node/Docker over the course of maybe 18 months. Used it fairly often when I was working in the space, not at all these days. Originally the plan was to license it as an enterprise vid tool.

(I've been considering open-sourcing it - would YOU use it if so?)

klabetron 1 year ago | |

I’d be interested if for no other reason to see if some of the hiccups I see in streaming video recordings are more common than just me/just random.

vivekv 1 year ago | |

I am definitely curious about a tool like this. I work with a lot of video streams and this collective knowledge of quirks might be useful as a QA tool

jeffreyrogers 1 year ago |

I wrote a script that looks at C++ files, figures out the dependencies (by looking at what headers they include) and automatically compiles and links out of date files. It makes programming in C++ sort of like programming in a modern language like Go. It took me a couple of days to implement and I use it any time I am working on my own C++ projects. I eventually want to add package management features to allow integration with external libraries, but this isn't a priority for me currently.

I have also worked on trading algorithms that used publicly available info about crypto order books to make profitable trades, which will obviously not be published since then they would stop working.

atlgator 1 year ago | |

Bill of Materials (BOM) software for identifying dependencies along with versions that are out of date or vulnerable is a growing market in Government.

bostik 1 year ago | | |

I can wholeheartedly recommend Syft.[0]

Decoupling SBOM data collection from vulnerability tracking (with your tool of choice) is a nice capability.

0: https://github.com/anchore/syft

morbicer 1 year ago | | |

I have good experience with

https://github.com/pivotal/LicenseFinder

This produces BOM with versions but rather than out of date it focuses on licenses which comes handy during acquisitions due diligence. Supports many languages

seemack 1 year ago |

I wrote an app to log mileage while doing deliveries, etc for my small business. It gives me a small tax benefit at the end of the year. To make it more fun, I gave the UI a "terminal" flair.

I wrote it over the course of a week or so and I use it frequently.

It's not that it won't see the light of day for anyone else but it's a very specific niche so I doubt anyone would even find it on the app store

If anyone's curious: https://play.google.com/store/apps/details?id=io.thisischris...

prayashm 1 year ago |

In high school I built a chrome extension to secretly chat with my girlfriend on the Google Search page.

Her parents were super strict and would not allow having a boyfriend, we were caught once so wanted to be few steps ahead of their detection.

Using internet was allowed for her to study. Made the extension such that when you search for something popular click on the largest image in knowledge graph (right side box) 4 times and then do a right click the wikipedia description will become a chat box (to avoid accidental discovery by her sister).

Backend a very simple .txt file and php to insert and maintain only last 5 conversations.

I think I made it over a few days. We used it for a total of 2 times because we couldn’t notify each other when we come online.

Switched to a simple ROT13 encoded sms-ing. With the key changing every day.

IIsi50MHz 1 year ago | |

> Switched to a simple ROT13 encoded sms-ing. With the key changing every day.

I was confused. So, some days it was ROT-13, some days Double ROT-13, some days Triple ROT-13? Surely not.

I guess you mean that it wasn't always 13 (so, not really ROT-13).

gkorland 1 year ago | |

Nice!

yolovoe 1 year ago |

An out-of-spec DNS server implementation that helps me understand and control my internet usage.

The DNS server resolves queries based on rules I've set up. Essentially, I can configure certain categories of websites to only resolve at certain time periods.

For example, I could make it so reddit, HN, etc, only resolve for a 5 minute time period (either anytime or only in the mornings) every day.

The point of the server is to track my web usage across all personal devices, and then make conscious decisions to control my internet usage based on this data. (All personal devices are on the same tailscale VPN... that's how I ensure I am always using my DNS no matter the network I am on.)

It's still a WIP, but I've probably easily sunk over 40 hours on it by now. I also wrote a custom Rust async runtime (single-threaded) for fun.

cinntaile 1 year ago | |

Nextdns also has support for resolving queries based on the time. If you ever get tired of rolling your own that is.

redrove 1 year ago | |

This is awesome! Please consider open sourcing it!

unsupp0rted 1 year ago |

I was selling an apartment in a developing country. I wanted to know, given the constantly updating property sales tax and rapidly worsening exchange rate, how much I’d end up pocketing in USD, if I sold for X vs X - 5% vs X - 10%, etc

That would inform my “I’m willing to go as low as” selling price.

So I built myself an app to scrape the current tax from the government’s online calculator and assemble a dozen what-if scenarios, given the current exchange rate.

When I found one that would let me break even, cash in hand after all fees and taxes, that became my price floor.

It worked. Now I don’t need my app anymore.

mimischi 1 year ago | |

I tend to think about these types of problems this way as well. But then there’s folks that will throw this together in Excel, and I realize I would not know where to start. Anyone got pointers?

sir_pepe 1 year ago |

My day job is all about doing presentations, so I obviously wrote my own slide software. It is a pure expression of my workflow, my requirements, and my idiosyncrasies and the way all of the above changed over ~10 years. It is a great performance booster if you can basically brain dump your thoughts straight into slides, and if you can just implement breaking changes (or choose to keep supporting an objectively bad feature for all eternity). I don't need to care about any other users, or the bus factor.

The only part of that software that ever became public was the animated syntax highlighter[0], but I don't believe any other part would help anyone else accomplish anything.

[0] https://code.movie/

xolox 1 year ago |

Over the years I've built lots of small and large tools for personal use, some of them I'm still planning to release as open source "one day", others I have no intention of ever releasing.

One of the biggest and most useful of those tools is a Django web interface that accepts JPG/PNG/PDF file uploads of scanned documents and in case of images (JPG/PNG) it will run "tesseract" to OCR extract text from the images (in case of PDF it will pdf2txt). The extracted text is stored in an SQLite database which enables keyword search in the uploaded documents.

I use this as my (digital) archive of important documents, e.g. mortgage, bank statements, insurance, medical files, etc. I just checked and I now have 1129 documents in there ranging all the way back to 2006 .

It's super useful to be able to go back in time digitally, without having to dive into the collection of physical binders with the real documents (ordered by year and month but nothing beyond that, given that there are usually only a handful of documents per month, and I can use the web interface as an index into the physical archive, if I ever need it).

doubled112 1 year ago | |

I use paperless-ngx but the concept is the same.

It is hard to understand how much easier this makes dealing with all of the paper in your life until you have it.

smeej 1 year ago | | |

Once a quarter, I scan all my accumulated paper with a similar setup and tag it all in Logseq. I almost never need the archived docs, but when I do, it's a breeze.

koeng 1 year ago |

I pretty much rebuilt my bioinformatics stack from scratch in Go, and I’m pretty proud of it! It does things that no other library, even python libraries, do for synthetic biology applications.

I’m pretty sure nobody else uses it, but I use it a lot for DNA design work for my company https://github.com/koeng101/dnadesign

heuermh 1 year ago | |

Very cool!

I am curious if you might explain how/why this stack diverges from the upstream one (bebop/poly)? I see for example dnadesign has a version two of the seqhash algorithm that looks rather interesting.

koeng 1 year ago | | |

I'll make sure to explain it a little more!

Basically, I developed a whole lot of bebop/poly, but I had some disagreements with the owner of the repo (Timothy Stiles) about direction at the later stages of development. For example, I wanted to standardize all the parsers to use a generic interface, so that they're all used in the same way, while he didn't really want to change anything. There were other features I wanted to add as well - you can see a full list in the changelog (which are the changes since diverging from upstream)

WoodenChair 1 year ago |

Yes, I run a daily hyper-local email newsletter that is custom built. It's called BTV Daily: https://btvdaily.com

I wrote the newsletter generator in Python. It uses all kinds of different APIs (news, social media, MailChimp, scraping, weather, even some LLM for summarizing some of the news, etc.). It runs every day at 8 AM on a little server.

It's not a super long script, but I've changed and refined it over the years many times. It's like I've spent many dozens of hours editing the same <1000 lines of code as I've modified, removed, and added features to the newsletter.

latexr 1 year ago |

You’ll probably enjoy this (relevant to your question). I’m not the author.

https://www.robinsloan.com/notes/home-cooked-app/

htrp 1 year ago | |

Love the "learn to program" vs "learn to cook" dichotomy.

mostelato 1 year ago |

What does it do?

I built a bot that runs every 2 weeks, scrapes my local movie theater's currently playing titles, runs them against rotten tomatoes to filter out movies rated below 85%, then looks them up on youtube and posts the trailers to my discord server

How did you make it?

Python script that runs in google cloud functions, triggered on a bi-weekly schedule

How much time you spent making it?

An evening

How often do you use it?

Every two weeks

c-hendricks 1 year ago | |

This isn't a bad idea but 85% seems like it would filter out a lot of good movies. The recent Dune, for instance, is at 83%.

Looks like about half my library would be filtered out.

joeyagreco 1 year ago | |

might have to replicate this one...

rsoto 1 year ago |

I have a quite big userscript that fixes all the little annoyances I've been finding on the sites I often visit. Is the click area too small? I fixed it. Is there a really big form that when I select a specific value some other elements need to be at a specific state? It's fixed now. Did we get a new business lead and we need to enter all their information to our CRM? I can now paste that info and the form will be automatically filled.

I find usescripts way more easy to update than an extension, so that's what I've been sticking with for quite a few years now.

shkurski_ 1 year ago |

It's hard to call it "software", but the last one was a script to merge multiple Google Calendars into one, born out of frustration with juggling them manually. It runs on Google Apps Script, reacts on triggers, so once an event is created/modified/removed in one of the calendars, the change is reflected in the main calendar automatically.

[Edit] In the opposite direction as well: if modified in main, it reflects in the original one. AFAIR, it was the feature I missed, since Google only supports (-ed?) one-way mappings.

KronisLV 1 year ago |

Back in the day, I had a laptop with only 4 GB of RAM, which would run out if I'd open too many browser tabs or programs. I didn't have an external monitor always connected, nor were most of the tray monitoring solutions to my liking. So instead I wrote a program that would create a few semi-transparent windows in the OS, snap them to the sides of the screen, allow clicks to pass through and resize them as the resource usage would change.

A blue full sized bar on the left size of the screen? The CPU is under 100% load. A purple bar on the right side of the screen, that reaches 3/4 of the way up? Guess my RAM usage is getting close to the limit, better not get too eager with the tabs, maybe close a program.

It actually wasn't that bad, but shortly after I just bought some more RAM. That was also before I had my own Gogs or Gitea instance, so I don't think I have the source anymore, it wasn't too hard to do on Windows though (nowadays I'd probably just put Linux Mint on the system or something, it needs a bit less memory in general). Oh, also now I have like 4 monitors for my main PC and don't do too much computing on the go. The 8 GB MacBook that I have for when I'm out and about feels rather slim, though.

Aside from that, there's the CMS I use for my website, though I'm not showing it to anyone because it's so bad that it makes me want to climb into a hole and disappear off the face of the planet. It still works though, so I don't necessarily see myself changing it out for something else just yet.

SimpleCaveman 1 year ago |

The last thing I made exclusively for myself and nobody else was a shopping list calculator that added tax to the shopping list as a kid on my TI-83 graphing calculator. Programmed in Basic, and I would use it to add up the items going I to the shopping cart while my parents shopped at Sams club as a kid.

And I'd tell them what the final total would be when we were standing in the checkout line.

Very small and basic, but I thought it was the coolest thing in the world as an 11 year old back in 1996.

geocrasher 1 year ago |

I'm not a developer. I can write some bash scripts but otherwise I struggle. So, I use ChatGPT as my own private developer (version 4o with a subscription).

The most recent is a Chrome extension that plays a "server down" tone any time the word "critical" appears on our system monitoring web page (Netdata). It plays that tone when the number of "critical" words goes up, and plays a "server up" tone when the number goes down. It's dead simple and works to give me audio alerts so that when I'm hyper-focused on something, I can get pulled out of it by the "server down" tone. It's gone over well with my coworkers as well.

Leftium 1 year ago |

I made an app for my brother's wedding so all invitees could easily upload and view photos in a shared slideshow (displayed in real-time on a big TV at the event). Dismantled as soon as the event was over. It took less than a day to create with SvelteKit, Dropbox, and https://slidesome.com

Some more:

- https://weather-sense.leftium.com: weather app with the trendcast just the way I like it. WIP, but already using it on daily basis.

- https://multi-launch.leftium.com: quick link launcher; can launch multiple links at the same time. I use this multiple times a day.

- https://tt.leftium.com: tool to streamline conversions I frequently need. When the input type is detected on paste the converted value is automatically put into the clipboard. Also paste works from anywhere on the page. A super-niche hidden feature is if I paste the outerHTML of my SoFi relay accounts list, it will transform it into a TSV format for pasting into a Google sheets balance sheet. I use it a few times a month.

- https://ff.leftium.com: tool to calculate the time I needed to do something in a game I used to play. Automatically updated a calendar event with notifications.

- https://orbs.leftium.com: another tool to help with planning in the game I used to play.

kredd 1 year ago |

Made a simple app to put all my Apple Watch walks on the same map, so I can walk every street in my city. Surprisingly there wasn't anything available that was free or straightforward, despite it being an easy app to develop. Honestly, it's extremely fun to use something of your own every day, and patch it up when you come up with some other ideas. I did release it on AppStore (https://apps.apple.com/us/app/mapcut/id6478268682), but mostly for my friends so they can use it as well.

JaggerJo 1 year ago | |

Wanted to check it out and was surprised that it requires an account.

kredd 1 year ago | | |

Yeah, totally fair point. I should probably add a simple guest access. Had to lock it behind auth as I keep adding features for myself that require some backend action, and was too lazy to write different code paths depended on authentication. I guess, that's also one of the drawbacks of writing something for myself, as you just forget about inconveniences that it can cause to others.

abofh 1 year ago |

Most of what I write is for an audience of one - even if it gets merged to the company tree, I'm usually writing for my own immediate needs. But to what you explicitly ask, I contact and I hate invoice management, so I have my own time tracker cli that integrates with stripe invoicing.

My hours get billed, I've got my notes for the cycle, and payments to my LLC get automatically routed to the right financial targets based on stuff I integrated with mercury.com.

Doesn't do the taxes, but cuts a lot of the low value/high cut vendors out of my revenue cycle and that makes me happy.

blululu 1 year ago |

Absolutely. Of late I have an iOS app to measure the grade of hills. Initially this was to avoid parking tickets in San Francisco which requires curbing your tires for a 3% grade. The reality is that this is basically no grade and you should just curb no matter what in SF. Still fun to know how steep the hills are when walking. The other one is to set the exif data on photos to be taken in Pyongyang 100m underground tomorrow. This me is probably going to get me and my friends in trouble with the NSA for messing up their database, but these things happen.

93po 1 year ago |

Yes, lots.

I made bookmarklets to sort multiple retail stores, including my local grocery store website and Amazon by price and price per unit. Amazon price sort is nearly worthless, I assume intentionally. Drives me crazy to grocery shop without price per unit, my bookmarklet also converts units.

I made a browser extension that filters out youtube videos, reddit posts, youtube comments, twitter posts, twitter sidebars, and probably a couple other things based on an extremely long list of keywords of crap i don't want to see - largely political, violent, war related stuff. I think it filters out more than half of posts on /r/all, partially because there's also a long list of popular subreddit blocks on it too.

I made a custom interface for Habitica, a habit-tracking app, to mimic a game from the 90s I really liked.

I made an arduino water gun robot to spray my cats and break up frequent cat fights when i'm all the way on the other side of the apartment.

More random stuff like this.

Wish i could find a job!

pfooti 1 year ago |

My spouse is a teacher. The science department at the school uses a relatively complicated grading mechanism called conjunctive standards based grading, which used to require a lot of spreadsheet magic to work. I wrote a gradebook app (firebase, angular) that handles the grade entry (not grading), conversion of assessment data into grade reports for students, plus charting and stuff so you can see student or course aggregate progress over time.

I originally thought more people might use it, but I have basically 6 teachers.

DrMachiavel 1 year ago | |

Hey,

Hit me at elliot@edusign.com if you have some time, I might be interested in what you are doing!

linsomniac 1 year ago |

I've been a huge proponent of ALWAYS writing software just for yourself. But I'm also a fan of releasing that software.

I have a couple notable stories about that:

I had a friend that wanted to scan his album cover, and I'd always wanted a scanner, so I bought one and wrote some command-line software to do it. Then I applied that as an extension to the venerable Xv image software. Wrote it entirely for myself, ended up selling something like a thousand copies of it.

Recently, I was tired of Spotify so I wrote a Python program to export my playlists into YouTubeMusic. Released it on Github and it now is by far my most-starred project, I figure it's helped at least a thousand people move away from Spotify, I've had a bunch of contributions to it and have had several people throw money my way.

Write for yourself, give to the world.

cobodobo 1 year ago |

I built fake iOS for my baby. Recreated most of the apps, phone, music, videos, notes, wallet, maps, etc.. but simple versions with giant icons. Also added a ton of 'soundboards' which are their own apps for things like animals, food, family, home. I have like 20+ apps in there now.

jamesfinlayson 1 year ago |

I've open-sourced most of my stuff, but one thing I haven't is a gambling simulator - I feed in odds and results for a season of sport and I can tune some parameters to try different strategies.

Someone once told me that apparently some local sports reporters' weekly tips are used with some seed money and the proceeds are given to charity and I was intrigued enough to spend a few days building something that could test that out.

bartaxyz 1 year ago |

The two that I still actively use

- Danish Swimming Water Quality App[1]: Native app for my iPhone that I use to check the water quality. The official one wasn't working for me, too slow and too buggy. Ultimately, it's just a JSON of public data spread on the map, very simple. - Artwork Framer[2]: Script using Blender that converts .png into a framed 3D model. You can even adjust the frame if you want and then export it as a model to be used in VR (works even in Apple Vision)

[1] https://github.com/bartaxyz/denmark-swimming [2] https://github.com/bartaxyz/artwork-framer

applesauce004 1 year ago |

Oh man. Do i have a list for you! I am very self-conscious of publishing my work. So over the years i have made many software games and utilities that will never be published. My wife thinks i am being silly and i shoud publish it. Anyway, here goes....

MP3Renamer(2002) - The age of music piracy is still rife and i have downloaded my share from napster, university file shares, etc. However, most filenames are horrendous and not clean. So, my first utility was a java program that would analyse file names based on common garbled patterns and rename it into [Artist] - [Songname].mp3. It worked surprisingly well for 90% of the use cases,

CombatLogAnalyzer(2008) - Me and my wife are in the throes of World of Warcraft arena which is a competetive dueling system. We only play 2v2 and we both suck at it. So, i enabled combatlogs in WoW and then wrote a parser, analyser and visualizer for every arena game and that shows which spells were used, where did damage come up, highest contributer of damage and this was by each playable class. By the end, we learnt what was killing us and the statistics showed our strengths and weaknesses. Suffering high latency and poor skills we managed to crawl from 800 rating to 1800 rating! We just couldnt go beyond that! (I was the crutch). This was done in .NET WinForms and i really learnt how to use linq.

Space Commander (2019) - My daughter is almost 4 years old and i think she is ready for computer games. I decide to learn MonoGame and i make a Space Commander clone. It is a HIT!

HappyMrsChicken (2019) - From my smash hit game above, i make a clone of HappyMrsChicken except this is in a forest where you have corn that the chicken has to eat and there is competetion from a mysterious goblin creature who also goes after the corn. Who will win?? Turns out, i cheated and gave the chicken a boost. My daughter won a lot!!

OptionsTrading (2020) - It is covid and i am locked in a quarantine facility for 28 days. Like a lot of retail noobs, we are getting into trading stocks and options. I decide IBKR interface sucks and I can do better. While spending those 28 days in isolation from family, i learn react to write a frontend and python to write a backend that displays all our trades, statistics, UIs, loss calculators, PnL, etc. My wife and I use this to date but i am too chicken-shit to publish it.

My personal favourites are: CombatLogAnalyser, OptionsTrading and HappyMrsChicken in that order

racl101 1 year ago |

If you count a bunch of individual shell scripts for text processing then yeah. A bunch. I still use a lot of scripts I built like 15 years ago. Every now and then I make tiny changes but yeah I still use them a lot. I'd say 40% of the software I've ever built has been for me.

I'd say it's a rite of passage to write software for yourself:

1) It gives new programmers some practice.

2) It can help you understand software development better.

3) It reinforces the concept of dogfooding what you create (even though in this case others won't get to use your software). Again, making you better developer. You'd be surprised how many people write programs that they barely use or test. Never really knowing how useful it is or isn't to others.

kj9 1 year ago |

Recently, I created a website that displays a map of restaurants featured by my favorite Japanese food YouTuber (who is mainly famous as a local TV personality). It's a public website primarily for personal use by my family and me, with minimal traffic.

As a fan, I was frustrated by the lack of a comprehensive list of featured restaurants, with watching all videos being the only way to find them. So I developed this website to see all locations on a map. I was surprised by how many restaurants were featured, so many pins on the map! Now, I'm enjoying trying out and planning visits to these places.

The biggest challenge was extracting restaurant information from the videos. Each video ends with a brief 3-second slide showing the restaurant's name and partial address. My solution converts videos to images, runs OCR, extracts text, uses an LLM to generate JSON data, and adds geolocation information. I set this up as a GitHub Action that regularly scrapes new videos and updates map markers automatically, all within the free tier.

It took me a few months to figure out the video information extraction and create the website using SvelteKit and MapLibre.

mr_mitm 1 year ago |

A TUI client for Confluence

A script that does a speed test of my Internet connection once an hour and plots a graph

A financial analysis webapp that barely works

I call it meware: works for me, and hopefully for someone else, too, but it's not polished.

andrewjmyers 1 year ago | |

I would really love to learn more about your TUI for confluence.

mr_mitm 1 year ago | | |

Sure, it's public: https://github.com/AdrianVollmer/Congruence

qiller 1 year ago |

Technically it's possible to see most of my code on github, but most of it definitely wasn't intended for sharing, mostly protection from losing it.

A number of SmartThings device handlers and arduino code for home automation (early Ambilight clone, light strips, sump pump monitoring, desk fans).

A janky pendant to run on RPi for my CNC (clockworkpi.com devices are cool btw!)

Reddit bookmarks manager that google somehow scanned so technically there are a few people using it... accidentally

Custom Mailspring build with themes and minor annoyance tweaks

Not counting various TamperMonkey scripts that fix some site annoyances

mstipetic 1 year ago |

I got annoyed at all the invoice generators so I recently built my own in a weekend. I put the data in Airtable and a python script generates the pdfs using typst. Much more flexible than any of the solutions I found and it took me less to build it than the time i spent trying out the available solutions.

jasondigitized 1 year ago | |

What wrong and inflexible about off the shelf solutions?

mstipetic 1 year ago | | |

They assume a specific format of the invoices and conditionals aren’t easily supported - like if I’m removing VAT use one format, if not use another.

Another problem is the annoying data input where things aren’t organized using tables for quick input, rather than forms on different screens. One more thing that comes to mind is it’s hard to reuse elements, sometimes I have a generic template per client and just swap in and out line items etc.

elseleigh 1 year ago |

Tons. A few recent pieces are documented on my site, at else.co.nz/code ... but there are also plenty of utilities as well.

I've written "radio station" music software that used text-to-speech to back and pre -sell music and include news headlines and calendar appointments (that was back when I used Windows).

For work, software to build deployment manifests for the various client instances of my research funding web app, software to update the dev MySQL databases for the same clients, software to export zips of all the current code for each client.

_lvbh 1 year ago |

I have a bunch of random scripts, executables, Python files, etc scattered all over my computer.

Some more often used ones: - A script that manages my Music files (add/rm/search) and syncs them with my phone when connected via ifuse+rsync

- a CLI to really easily deal with port forwarding because I run a lot of stuff on my raspberry pi and old laptop which goes out to the internet via WireGuard & forwarded from my VPS

I also have local forks of a few abandoned projects with a few bug fixes or minor added features. Ought to find alternatives but too lazy

xoxxala 1 year ago |

I write little Python scripts (or use Excel) to simulate computer/video game mechanics and quickly iterate over them before passing them off to a real programmer. I also design boardgames, so often write die rollers to calculate probabilities (it's faster for me to write something that generates hundreds of thousands of results than to actually do the math, especially if I want to tweak in real time).

My bad habit is not properly archiving these little programs, so I invariably end up recreating them from scratch each time.

satisfice 1 year ago |

Most of my software is made for my own use. I write tools that help me test software.

For instance, I wrote a tool that tells me how many simultaneous users I need to simulate X number of real users who are hitting the server only intermittently.

If you write tools for your own use, unless they are really big you tend not to bother with coding style conventions. The important thing is being able to code it up quickly.

I used to write everything is Perl, but I’ve switched to Python. It’s a great rapid prototyping language, and basically everything I do is a prototype.

aranchelk 1 year ago |

Assistive technology, I made a head-tracking mouse replacement. I’ve now used it almost every day at work for a decade. It’s open source but AFAIK no one else is using it:

https://github.com/aranchelk/headmouse

polivier 1 year ago |

My wife is an optometrist (so, an independent worker), and she needs to check the list of patients she has seen (and the types of care they were given) to make sure that it matches correctly with the clinic's records. It is a tedious job, something that takes about 20 minutes per day. With a little scripting, I was able to bring that down to about 5 minutes per day. The time I saved her has added up to several dozens of hours now, and will amount to several hundreds of hours saved as the years go by.

jasondigitized 1 year ago | |

Why are there two sets of records and why do they need to match?

aidenn0 1 year ago |

I write various software tools to aid with running various role-playing and/or war games. Many I wrote before online code hosting was really a thing thing[1] and all of those are lost to the depths of time. For more recent tools, depending on how litigious a reputation the RPG game publisher has some were made public.

1: SourceForge launched in 1999; a lot of what I wrote predates that. Also CVS in 1999 makes git today look user-friendly; I didn't successfully get CVS to SF setup until around '02.

utensil4778 1 year ago |

Several years ago, I picked up an old SmartBoard projector. The thing has no buttons, it's meant to be plugged into a remote control module attached to the board, or controlled over serial as part of a room system, or through its Ethernet connection.

I don't remember how I got started initially, there was some investigation of the network protocol it used. It was some crusty old standard that used an odd command scheme, but I managed to divine what magic packets to send to wake it up and select an input.

I ended up rolling it all into my first and only Android app. It eventually became a full remote control for the thing, including a sleep timer that would turn it off after an hour.

It was extremely basic and horribly ugly. I never looked into automatic discovery of the device on the network, so it had a hardcoded IP address. But it worked well enough to get a free projector running.

Apart from that, every programmer has thrown together innumerable scripts and throwaway programs for one-off tasks. My most recent was a thing that takes in a Diablo 2 save, then sets the version number and recalculates the checksum. My pirated copy is a bit old and won't accept saves made with modern editors. I don't know how many scripts I've written that walk through a file system to find or change something in the contained files.

I also have a version of Klondike solitaire written in C++ with SFML. I initially wanted to build a neural network to play solitaire, but after building the game itself, I found in my research that solitaire is actually a very difficult problem and far beyond my skills.

rsaarelm 1 year ago |

It's more "nobody else is interested" than "it's not out in the open", but I've made my own structured data format implemented as a Rust serializer https://github.com/rsaarelm/idm and am using it for a growing collection of command-line tools for managing personal notes written as outline files https://github.com/rsaarelm/idm-tools and to run a static site generator https://github.com/rsaarelm/blog-engine . I'm also writing a game that uses IDM as the data serialization format.

Idea for the format was that you can write structured data with a really minimal syntax if you have an external type schema running the parsing, and the syntax emerged from the line-and-indentation based outline note files I'd started writing for myself. It took some months of work and planning and a couple rewrites to get the core IDM library working right. The tools and site generator were simple and straightforward in comparison.

npteljes 1 year ago |

I wrote a video recorder specifically for one show on a streaming site that had low-level DRM enabled. DRM meant that tools couldn't grab the stream directly, but it was low level enough that the screen could be recorded. So what I did is write PHP software that used Selenium to open a browser with DRM enabled, logged in to the site, located my show, started it, started screen and audio recording with FFMPEG, and when the episode ended, stopped recording and moved to the next episode. To speed up the process, the program started multiple instances of this, and I used PulseAudio sinks to record their audios separately. It was magical to watch this work, like I was in a real TV studio. I also wrote an OCR solution with Tesseract and ffmpeg in bash, that grabs the title card frame and parses the text out of it. Time spent is around 20 hours. After the thing was done and I already had some episodes, my partner and I come to an agreement that the show is pretty toxic, and we don't want it in our lives after all, so I deleted the episodes that I had, and haven't used the software since.

lumb63 1 year ago |

I made a Rust program that, given a database of football players and projections about how they will do during the season, can be used during a fantasy football draft live to provide an indication of who the best player to draft is. I have other fantasy/sports gambling applications I’ve written to solve knapsack-type problems, choose the best team to pick in a “survivor” pool, and convert from various Vegas odds to win probabilities.

Outside of sports I have written code to download the entire Jeopardy archive to categorize most likely questions to appear to help study, and code to interact with Fitbit APIs to pull down data, code to analyze certain aspects of my full genome sequence.

I have unfinished code (and a desire to finish it) for creating algorithms to play certain board games, a tool to automatically request books and audiobooks from the library based on a Goodreads reading list (or other source of books), a tool to optimize Universal Paperclips, and several different business ideas I’d like to eventually pursue.

Creating something you find useful is a great way to get something done, and make a good tool. If you want it, chances are there are a lot of others who also want it.

sloaken 1 year ago |

Several -

My most recent was to manage dumbbell work outs.

Problem:

1) I hated changing weights in the middle of a session

2) Wanted to manage progression

Situation - I have 4 metal sets of dumbbell handles, a plastic set, some individual 3 - 5 pound pairs. A single, dial the weight dumbbell. Plates in metal range from 10 lbs to 0.25 lbs.

The SW:

1) using SQLite for DB

2) One application to calculate optimum weight settings - typical run takes 100 to 200 tries to get the best set.

3) Another application to present / track sessions. It was a BIG timer display to ensure I do not do the workout too fast (goal is 45 sec a set)

4) A tracking report.

Complexity issues: Not all dumbbell handles weigh the same - even the tightening nuts vary. Solution was to weigh everything and pair up the nuts so that each dumbbell handle with nuts matched its pair - oh I color coded the metal dumbbell handles.

First algorithm took too long - my first version would calculate ALL combinations of all weights. Then select the optimal solution - before adding the 0.25, 0.5, 0.75 and 1 pound plates would take between 15 to 30 minutes to run. This was solved with a slightly more complex algorithm. I calculated the all combinations for each dumbbell. Merged those lists into a big list, Found the perfect setting for each exercise. Check for conflicts. When a conflict occurred, found the exercise with the least delta from optimal and changed it to the next weight setting.... Check for conflict. Now it takes no more than 20 sec and reports 100 to 200 times it hit conflict before solving.

err4nt 1 year ago |

For a number of years, I built various To-Do (or more accurately To-Done) lists. I would use them for about a year and then just stop, and make something else. I don't currently have any to-do list solution, I'm just using pieces of paper or forgetting stuff. At one point I had:

- A single-page HTML app that saved entries in localStorage in 1 browser (like 1kb of vanilla CSS and JS, barely anything)

- A static HTML website, generated from a folder of Markdown-like raw text, with a CLI build script. Hosted on a public web server.

- A simple linux CLI command that let me check, set, and mark items as complete, build with Node and saved to a JSON on disk somewhere.

And there must have been one or two more. Nothing serious, nothing that stuck long-term, but I probably spent 1-10 hours making these, and then using them daily for a year or a year and a half.

I'm very conscious about time spent automating or building what you want, versus how much real-life time savings or experience boost does it give you. I'll likely make more of these in the future when the itch reappears and hopefully get another year's enjoyment out of whatever little thing I build.

shtack 1 year ago |

I have a lot of examples but a funny one that comes to mind is: in the early 2000s when IM clients were all the rage, I wrote a VB6 application to go through my MSN Messenger logs and rank my friends by how much I talk to them. Kind of like a MySpace top 10 prior to MySpace.

I spent a decent amount of time tweaking the UI, improving performance, adding filters, providing different file output formats, etc. Never shared it with anyone.

0xf00ff00f 1 year ago |

I wrote an application to get GPS data for a sport activity from my cheap smartwatch and dump it to a GPX route file. The application uses the Qt Bluetooth libraries. I use it every day after my runs, then I upload the GPX files to Strava.

I did it because I wasn't happy with the official Android app, so I reverse-engineered the watch's Bluetooth Low Energy protocol (this was pretty fun actually).

gwbas1c 1 year ago |

I have a lot of DVD-Audio and BluRay audio disks that I rip to play in Kodi. I wrote a utility that scans through audio files to generate a list of track names, and script to encode images for each track into a video (without sound) to multiplex with the audio.

Years ago, I wrote a .exe to change screen resolution, and then revert when closed. I used it when my old laptop had a composite out, and I would watch moves that I downloaded on a TV.

A few years ago I wrote a grid-scale battery simulator, scraped some publicly-available cost of electricity data, and calculated how long it would take for grid-scale batteries to break even when buying and selling power to-from the grid. Short answer: About 18 months. Long answer: Permitting a power plant takes a few years, and the permitting process only recognizes buyers or sellers. The permitting process doesn't recognize "storage" yet.

More recently, I wrote a quick-and-dirty utility to restart explorer.exe, because it has some really silly multi-monitor bugs that require restarting the process every once in awhile.

aspenmayer 1 year ago | |

> More recently, I wrote a quick-and-dirty utility to restart explorer.exe, because it has some really silly multi-monitor bugs that require restarting the process every once in awhile.

I have had some weird issues similar to this, which the following keyboard shortcut was helpful with:

> Windows Key + Ctrl + Shift + B - Wake up the device when black or a blank screen.

https://support.microsoft.com/en-us/windows/keyboard-shortcu...

gwbas1c 1 year ago | | |

Not the problem I'm having at all.

What happens in my case is that Explorer forgets the "When using multiple displays, show my taskbar apps on..." setting. It just randomly changes the setting in memory: I can either change the setting back and forth, or restart Explorer, and then it works correctly.

It's the oddest bug I've seen.

mlfreeman 1 year ago |

Many years ago I partially cloned the old iGoogle homepage because I liked it (and Google was killing it off). It's gone through a few experimental rewrites in various technologies for personal educational purposes.

Right now, it's ASP.NET/.NET 8 on the backend and still plain jQuery on the frontend.

I display RSS feeds, US National Weather Service data, and comics in it. I also have it send some things to friends and family as emails periodically.

Hangfire works on the backend to actually fetch new data at appropriate intervals.

I occasionally have to modify something and manually push a new build because something remote changes but it feels fairly stable right now (knock on wood).

I want to redo it to use ASP.NET AssemblyParts and work towards essentially giving each little box its own DLL as a sort-of-plugin-system so that I feel more comfortable adding more types of boxes (stocks, different weather data, etc) and maybe one day can open-source it. (I'd like to so I can point prospective employers at it and say "see, i can actually write reasonable real world code.")

k310 1 year ago |

I did mostly scripting as in sysadmin work. No FT programming per se.

I found no free optical design software that would run on Mac, so I coded something up to do some paraxial ray tracing ( maybe more, I'd have to dig up the code) and (this is the good part) draw lens diagrams from the specifications.

Pretty simple, but it was fun to do. Very little available for Linux either. Physics and optics people want to have fun, too.

Much of it was just parsing the input data.

I do recall a design and/or analysis program written in Basic, but it wanted a particular basic interpreter, and I forgot if it had porting problems. Must have. I don't recall using the program.

Oddest bit was something I did on my own for Sun flex office. I would get the list of scheduled occupants and their office choice and overlay that on a map of the office suite, for a "who is where" map.

On a "real" work task, I learned how to write graphics commands in Illustrator 3 format. I may have used that on this project.

But more generally, tacking the AI header code to the file made it valid Postscript/Illustrator format.

shred45 1 year ago |

I built an OAuth proxy (only Auth0 currently works) hosted on Cloudflare workers. I'm a big fan of the self-hosted OAuth Proxy [1], but some projects don't lend themselves to hosting a container, sometimes you just want to set up a simple app on Heroku, Fly, Workers, etc. and have an auth proxy sit in front of it.

My solution also manages SSL via Cloudflare and integrates with Stripe for simple fixed-price subscription billing models. The idea here is to be able to iterate on product ideas quickly without spending a day each time figuring out authentication and billing.

I did set up a marketing site at the time so that others could use it, but I don't have any users, and I'm happy to maintain it just for my own projects (half a dozen now).

It took me 2-3 weeks to make so on net I have probably not saved much time, but it really helps reduce the friction of launching things which I think is valuable.

[1] - https://github.com/oauth2-proxy/oauth2-proxy

owlglass 1 year ago |

I wrote some PowerQuery functions and VBA macros to facilitate client invoicing that cut down ~2 hours of work to ~10 minutes (and shrinking, as I toy around with the scripts to delegate more of the work to the machine each time).

The billing data is pulled from an external vendor's portal. The contact data is pulled from our internal CRM. Both sets of data are then cleaned up and merged with PowerQuery, and then VBA is used to send emails out to clients.

I probably spent in the range of 3-4 hours getting a working version going and ~20 hours optimizing during downtime at work. I genuinely find it enjoyable to work on—there is something immensely satisfying about automating rote work away.

I use this once per month (a billing cycle). It will probably never see the light of day for anyone else, at least in its current state, because I work in a low-tech, nonprofit environment and using this kind of tool would be daunting for my co-workers (for reference, mail merging is sometimes intimidating at my workplace).

3s 1 year ago |

While not exactly software per-se, I created a system of multiple text files to manage todos, long term goals, and various reminders (eg, IOUs, deadlines, etc). This was inspired initially by Jeff Huang’s blog post [1] but then grew to a complex collection of different files. A problem I ran into was building an interface for displaying and editing these text files (each file has a different width and for some files I want to have different heights when editing them). Ultimately I settled on multiple vim tabs in a terminal window. Been using this for close to five years now and I couldn’t be happier with it. However, at this point the system of files (and the terminal “user interface”) is completely customized to my life and would likely never fit someone else’s requirements.

[1] https://jeffhuang.com/productivity_text_file/

quilnux 1 year ago |

I wrote an application that sends GPS coordinates to a Web API that plugs into Home Assistant which I use to open and close the garage door when I come home, or leave the house. 2 independent sensors confirm the action completes and if it doesn't, it re-sends the command until it does. Another sensor detects the door from the garage going into the house being opened, which closes the garage door when it was opened from the GPS application.

The application sits on a RPi in the truck powered through the cig lighter plug. I don't know how many hours I spent on it as it was a weekend project I did when I had free time (not every weekend). I can say I got it working in about 4 months though. So however many weekends I had free from that 4 month period is about how long it took. Probably 40-60 hours though.

rye-neat 1 year ago |

I'm building a streetable rock crawler out of a 78 F150 with a custom radius-arm suspension in the front. I needed to measure the deflection of the drag-link & track-bar as the front axle cycled up and down while changing a few variables: mounting locations, drag-link/track-bar angles, and drag-link/track-bar lengths. I used plain Javascript to display a graph, lines representing the drag-link and track-bar, enabled them to be clicked+dragged along with their mounting points and sizes.

With this visualization I was able to determine the best way to package this on the vehicle with the minimal amount of deflection to avoid bump-steer and death-wobble.

I suppose it would be useful to other people building radius-arm/link-suspensions that incorporate a track-bar but I haven't got around to hosting it any where.

geocrasher 1 year ago | |

That is really cool. I haven't built a rig like you, but I have it on my bucket list to build a fully dressed rock crawler out of a Mitsubishi Montero 2dr (also sold as a Dodge Raider in the states). It'll be leaf sprung to start, but using your method of going 4 link would be preferable to the "build and pray" method that most people seem to take.

digdugdirk 1 year ago | |

I'm a mechanical engineer, so I'm always intrigued by visual calculations like this that exist outside the standard CAD/excel paradigm. Is there any particular reason you went this route for this application? Do you use a pre-built framework to enable rapid creation and iteration of the setup?

rye-neat 1 year ago | | |

I went this route because I'm a software engineer that mostly works with Javascript and needed it fast. No framework but bounced a lot of the problems off of Chat GPT to help me figure out how to get it done. I also figured it would be more useful than a CAD model to non-technical folks if I made it available online.

hiAndrewQuinn 1 year ago |

Basically everything I have at https://github.com/hiAndrewQuinn at least started this way, before I polished it up for external use. But, no, if it really is meant for my own eyes only, it lives and dies as a shell script.

micvbang 1 year ago |

I've had many use cases for using an event broker, but never found one that was simple enough that I would venture into hosting it myself, or cheap enough to rent/host that it was feasible. Once I realized that cloud object stores fit this problem perfectly (they provide durability and are cheap to use), I realized that it would be possible to write one myself. I wrote a post on it here, along with a tiny performance evaluation: https://blog.vbang.dk/2024/05/26/seb/

I spent the better part of a week working on it full time, but spread over months. I use it daily - it's serving the needs of multiple projects that I needed it for :)

larrybolt 1 year ago |

My wife (mainly, my role has been system user/devops) wrote a custom angular UI on top of grocy for managing our household stock (basically any product we buy at grocery stores), there are two bluetooth barcode scanners and screens which allow you to quickly checkout a product when consumed. Since she started gardening she's also "abusing" the db with custom fields to track when she's planted vegetables, harvested them, etc...

Also over 70% of the lights / 50% of other devices in our house are smart (zigbee/wifi/ble) and are connected to home assistant (I very much recommend tradfri+xiaomi zigbee+home assistant). By now I'm sure we've spend over 200h on our "smart home/life", we love data :)

vintagedave 1 year ago |

I wrote a static site generator. It was the first "real" Python app I wrote (many files, classes, etc and actively using Python features.) The code is _terrible_ in the way that code can be when you're learning a language. You can definitely see the progress of understanding Python as you see the project develop. However, it's robust and is used to generate my site right now.

It supports Markdown plus a custom template language to convert Markdown-plus-more documents into a website, which allows me to add footnotes, sidenotes, images with specific formatting, custom markers, etc. It has specific support for parsing English and splitting sentences, so each one is in their own span in the resulting HTML. This is used for specific typographic layout.

jborden13 1 year ago |

Not for me, but for my wife. She does financial advisor marketing & advertising compliance for a financial broker dealer.

Her rules for validating compliance were stored in a local Google Doc and her advisors are often uneducated & confused about what disclosure rules are applied to what types of marketing.

So I structured and organized the rules on a UI and then built an AI tool that let's her upload any advisor marketing materials to validate it against her ruleset.

It would be rad if I could sell it to her employer as an educational & compliance tool for their advisors, but currently this is just for my wife.

It took 3 days and I built it in Vue + OpenAI api.

https://master.dnwas22p6qpn6.amplifyapp.com/

qznc 1 year ago |

The static site generator for my website: http://beza1e1.tuxen.de/gen.py

A news bot: https://github.com/qznc/mrktws-news (the output is public, does it count?)

A TiddlyWiki server: https://github.com/qznc/tiddlywiki-py

Such stuff usually costs me a few frantic evenings to build the first version and then minor maintenance.

wiradikusuma 1 year ago |

Do scripts count? I own 100+ .id domains (generic names, like player.id, awesome.id, and sweet.id), and owning a lot of domains is expensive both in money (renewals) and time (maintenance). So, I became a registrar reseller to get better price and API access. I wrote some Frankenstein scripts that cobbled up together those APIs, GitLab's, and Netlify's to automate publishing through CI/CD to those 100+ domains.

At the end of the day, I gave up and just put everything in Dan. Apparently, it's more lucrative to just sell them.

dllthomas 1 year ago |

I have a webapp for tracking chores that need to be done periodically (but not on a fixed schedule). It just lists all chores sorted by how due they are (period / time since last completion) and surfaces a short history of who did what. I've rebuilt it a few times and played around with extra features, but the basics didn't take long.

I have a utility (dklocs) that'll turn git-formatted diffs into location-prefixed changed lines. It lets me do things like `git diff master | grep thatThing | vim - -c cbuffer!`. I built it for me (and probably use it multiple times a day) but threw it on github (along with another tool for intersecting a diff with code coverage that I don't think I've used since the motivating use case - where it did prove helpful).

I don't know if it quite counts as "creating software" but I've got some scripts and configuration to maintain separate context in named screen/tmux sessions, setting shell variables and aliases, adjusting the prompt, starting in some particular directory. Most useful there is segregating history by context, so ctrl-r when I'm coding doesn't step through system administration stuff.

I have a general project to decompose applications into utilities, and a pattern for dealing with the long-running bits that's been somewhat successful. I once wrapped up libpurple in a client that worked that way, and (in a separate project) it's how I get errors from `cargo watch` into vim.

islandert 1 year ago |

I made a CLI tool called kilojoule that is similar to jq. I addition to the normal suite of JSON manipulations, it also has support for a couple of other file formats and can call other shell commands.

https://github.com/stevenlandis/kilojoule

I’ve found it to be a pleasant multi tool for interacting with the shell when I need something a little more than bash.

It took a couple of weekends and evenings to get working but was a really fun way to learn about parsers, interpreters and Rust.

alx_the_new_guy 1 year ago |

Kinda lame compared to what other people post here, but this is what probably 90% of the "I just use it myself" software is IRL:

- the most "impressive" one right now, though barely realized since I've just had the idea this week, is a debug/log library that spawns child multiple processes with consoles attached (since you can allocate just one console to a process in windows) and allows for debug info stream separation and rich-ish text features like color

- i've started writing a custom "set of commands" (90% IO, tied to a specific hardware modules, no algebraic functions or anything, so not exactly a programming/scripting language) language specifically for, sort of, programming-illiterate people so that they could easily implement test algorithms without asking software devs to do it. It got nowhere bc I didn't have time to implement it

But my a high level hardware emulator I'm using to debug GUI in production-ish environment uses whatever is left of it.

- environment management software that assigns PATH and other variables. Those commonly ship with software, but I havent really seen people writing their own for general env management

- my friend couldn't get Sony Vegas to produce good chromakey results, so he cobbled together some javascript to do it

- I've built a python notebook to analyze my bike rides combining Garmin Watch (gps + HR) and OSM data (estimating speed vs power vs road conditions).

- since (last I've checked was like a year ago) cmake devs value json adherence over readability in CMakePresets, I've written some scripts that convert jsonc to json. Also, those can convert string arrays to strings and add other QoL and readability improvements

- also, since CI/CD pipeline at work uses pretty old cmake that doesn't support presets and is a ton of work to upgrade due to it being airgapped (I will not elaborate), I've written a script that converts a preset into a shell script. Not completely, just the options I use.

- i guess a lot of custom diagnostic software I've written at work, though that doesnt really count since this is what I'm actually supposed to be doing, instead of most of the above and jeneral software shenanigans

owenpalmer 1 year ago |

I have a very simple AutoHotkey script that remaps [h,j,k,l] to [left, down, up, right] when the LeftAlt modifier is pressed. This prevents me from having to switch to the arrow keys all the time.

I use it for navigating the list of browser search suggestions, or for quickly moving around any program that doesn't have vim bindings.

I've found it to be especially helpful while using the https://www.desmos.com/scientific calculator.

tobinfekkes 1 year ago | |

That's brilliant, very clever and practical use of remapping keys!

halotrope 1 year ago |

Yes many things actually.

- A mac app to generate to read text as playlists from openai tts api (my gf can't use the api)

- A automatic visual scraper that can get arbitray information from any website (e.g go to target and get the top 3 milk prices or get the licensing information from this opensource project)

- An ETL tool (called tabmaster) that can sync arbitrary json apis into postgres tables. with automatic schema inference and deduplication logic

- A really good OCR tool that enriches scanned PDFs with accurate words and not the bs that adobe ships

all really useful and used daily.

EDIT: formatting

johnisgood 1 year ago | |

> A automatic visual scraper that can get arbitray information from any website (e.g go to target and get the top 3 milk prices or get the licensing information from this opensource project)

Sounds interesting. How does this work exactly? How do I input that I want the top 3 milk prices, and how does it retrieve that data?

halotrope 1 year ago | | |

it works with a llm/visual model and is integrated with a control for the browser. it works surprisingly well i might do a shown if its interesting for other people

rstat1 1 year ago |

2 of my most used web apps are ones I made (technically 3 but the 3rd is a platform service that handles stuff common to all of the services that run on it, there's 5 currently)

1 is a sort of a virtual notebook where I put things I want to remember. Things like guides for setting up new services on top of that platform service. Or random 1 line commands that I don't quite use enough to remember but still need to. Page content in this app is stored in encrypted Markdown files, the metadata (ie the title, publish date, etc) is stored in a local MongoDB instance. It has a feature where you share individual pages publicly if you want, but otherwise pages are viewable only by their original creator. Server is Go, frontend is Angular 10. I don't remember how long it took to build as it started as something else and I kinda reset the development half way through. Probably a few weeks, but I also wasn't constant working on it, so probably longer.

2 is a thing I built out of frustration with my self-hosted Gitlab instance constantly OOM-ing the VM it was on and crashing. It has like a tenth or less of the functionality of Gitlab, but also uses substantially less memory and CPU and does exactly what I want so hasn't seen much if any further development. Also Go for the server and some even older version of Angular for the frontend.

jpc0 1 year ago |

I work in live production and have made tons of little apps to make my life easier.

A lot of them are little web apps with basic buttons calling http endpoints on gear /apps or doing basic OSC commands etc.

People usually use something like a streamdeck for this but I find being able to throw up a slider or something in there so much easier.

And many times it might even be single use for a specific event and a lot of time I'm just throwing up a single html page with no styling and a script tag so it really takes a minute or two.

mzronek 1 year ago |

I reviewed hardware back in the day and was tired of all the repetitive tasks necessary to measure the performance of CPUs, GPUs and storage devices. So I wrote a benchmark automation tool, that did the work for me.

CINEBENCH and the likes where easy, but I also automated games without using their integrated benchmark. I needed a scripting language to load settings, go through the game's menu and load a save game. To avoid any kind of load from the automation, it offloaded the input data to an Arduino-based USB device, that simulated the benchmark run with previously recorded input. It worked pretty well, but small latency issues could of course result in small variations of the run. And bouncing into NPCs was generally a bad idea.

Here is a video of the system in action that completely automated a custom CS:GO run with additional streaming load as it would occur when streaming PC gaming: https://youtube.com/watch?v=ZpSPyd9f4cg

I get asked once in a while if the software can be downloaded or bought, but I am not going to do it. Writing software for yourself has the neat advantage that you never need to deploy it, upload it, write a change log, answer questions or fix bugs at any given time. It is just about solving the task at hand and nothing else.

chaosharmonic 1 year ago |

I've been tinkering on crawlers to doomscroll job boards for me, along with a half-formed hybrid of a CRM and Tinder for swiping through the various results and then tracking them.

I eventually want this to be usable enough to share with others for local use, and to demo on my portfolio, but for now I'm just trying not to spend more time building the tools than I am using them (and harvesting the redirect links is already enough to solve a lot of what makes the search process miserable). In the meantime it's mostly a cluster of experiments that range from teaching myself Web scraping, to generally aiming for a leaner tech stack than my prior full-stack experiences, to specifically asking myself "how much of this can I do in pure CSS?"

While I'm not sure I want the support burden of maintaining the scraping code in public (and anyway it makes more sense imo to just enable bulk upload so you can bring your own sources), I do have a massive beast of a writeup[0] documenting a lot of what went into that, and the API code is at least presentable (see my GitHub) even if the UI is too skeletal for that as of now.

[0] https://bhmt.dev/blog/scraping (fair warning: this is 10000 words not including code samples)

rtcode_io 1 year ago |

https://RTCode.io : Try: Code → New…

↓ deploys to

https://RTEdge.net : interactive map

---

I use it daily, nowhere else lets me build full-stack apps with nothing but the web platform APIs, while preserving (front- & back-end) state between edits!

The playground just lets me code service workers (https://sw.rt.ht) which deploy with one click and run as edge workers!

mmphosis 1 year ago |

Lots. They mostly perform automation, shortcuts: hotkeys, commands, scripts, aliases, functions, AutoKey, ... They've taken anywhere from years to minutes. The software gets used frequently or it gets deleted.

For example: p will do cat (or hexdump or ...) or ls depending on file (type) or directory. Let me show you shebang which is just a memory aid:

  $ show shebang

  .../bin/shebang
  #!/usr/bin/env sh
  head -n1 "$0"

stewartbracken 1 year ago |

I recently had our first baby. I created a self hosted web app for tracking diapers, food, etc. Through the delirium of the first month, it’s been so helpful with recalling when and what we did last and staying in communication with my partner without always being awake at the same time. I know there’s other apps out there but I wanted to keep my baby’s health data private. And it’s fun to create a bespoke app tailored to my family’s needs.

misev 1 year ago | |

We're doing this sort of tracking in a Telegram group. We just send messages with a well-defined structure:

    <category code> <time> <optional description>

e.g.

    S 2000
    W 0800
    F 0900 banana
    P 1010
    ...

    (S = sleep, W = wake up, F = food, P = poop, etc.)

Every few months I copy paste the messages from Telegram into a text file and have a script to parse, clean it up and add the dates. Would be fun to try some data science on the past few years of this data.. at some point :)

kibae 1 year ago |

A note-taking app that is similar to Obsidian where I can link notes to each other.

Some differences include no naming rules (a lot of my note titles have a colon) except uniqueness, custom clusters so my knowledge graph is manageable.

I’m going to add different note types (i.e. not every note is .md, but have .csv and .ical as well) that can be expanded and linked within a note.

It’s written in React, hosted on AWS (so not an Electron app… yet), and CodeMirror for the editor.

I’ve spent probably 100 hours making it so far.

gkorland 1 year ago | |

That is cool! Would love to see how it works with FalkorDB as the Graph Database for the knowledge Graph https://github.com/FalkorDB/FalkorDB

Sjeiti 1 year ago |

Being self employed I made my own invoicing software because I don't like financial data in the cloud, and because most software had really bad invoice styling. All data is kept on local machine, and can be synced peer2peer (ie to phone). https://projectinvoice.nl/about But I no longer use it since I've landed my first permanent job last year (at 49).

sos_dev 1 year ago |

A git switching utility that switches git profiles and ssh keys between two accounts, written in powershell. Its a one click solution by clicking of two batch file wrappers one for original and one for override configs, I love it saving me faffing manually w git configs and ssh agents.

Built custom (atom) extensions for the Hydra vj environment (https://hydra.ojack.xyz/) that add in midi control (based on the midi spec for web which I am still amazed exists and is at least somewhat supported https://www.w3.org/TR/webmidi/) , some lazy eval helpers and custom css styling for the programming text for more crazy feedback visuals.

A custom build script that runs a client and server architecture and their related logs all split in the same Window terminal window.

Several highly idiosyncratic single purpose visualisation / vj apps in processing and openframeworks, some doing camera feedback stuff, some wiggling points and particulars around on music or blob detection.

burlingplane 1 year ago |

I've been incrementing on a Next.js app for three years now, which helps me tracks all sorts of things that used to be scattered across different apps.

It holds stuff like:

- A daily journal, plus a curated photo for each day that I can put on a calendar

- Random habits I want to track, like how many cups of coffee I had, did I do my morning stretches, etc.

- Fill-ups and mileage on my car, time to next oil change

- Restaurants I've visited, plus ones I want to visit (I use the Google Places API to search for restaurants)

- Books I've read/want to read

- Movies/TV shows I've watched, and ones I want to watch (I use TMDB to pull in metadata about movies/shows). I also sync my watchlist from Letterboxd

- Strength exercises I do, plus runs + bike rides that I pull in from the Strava API

I used to use several proprietary apps to track these things (Letterboxd, Goodreads, etc), but it's great having them in one place, and with tight control over the database. It's amazing how useful it is to have a log of everything you've done to look back on. Even simple stuff like, last time I was at this restaurant was 2 years ago. What did I order and did I like it?

octopoc 1 year ago | |

This hits close to home. I have something similar, except it's not as featureful and it's ridiculously purpose-built for me. E.g. I have one page in this app for generating PDFs of a very specific type that I need. I have another page that parses CSVs from my bank. These aren't tools I use regularly, I just need them occasionally, but they're all in one repo in one project.

There are of course apps that do each of these, but when you start integrating them together, with their different ways of doing auth, different kinds of APIs, etc. things get so complicated. I worked in a company that integrated with some third parties and those integrations were easily 50% of the workload for the dev team and maybe 90% of the workload for support. There is so much effort being wasted on having different systems for different things.

I feel like there's an idea out there that will solve all this for open source--maybe involving stitched GraphQL APIs, OIDC+JWT for auth, etc. Something kind of like Sandstorm[1] except with Sandstorm the different apps weren't necessarily built with Sandstorm in mind. In this system there would be a centralized identity management system like Keycloak that manages concepts like users, roles and apps, and everything else delegates auth to that centralized system.

[1] https://sandstorm.io/

bostik 1 year ago |

An i3bar application that shows the name, status and elapsed/remaining time of current song in mpd. Display only, all player controls are done through hotkey triggers or explicit 'mpc load/add/clear' commands.

About 500 lines of C, including comments.

Normally running all the time, but for some reason mpd broke a couple of weeks ago and I haven't had time to figure out what's wrong.

HackHawk 1 year ago |

Lots, but my favourite is a caption remover. I found a film I wanted to watch, the audio was in English, but there were Greek captions spread over the bottom quarter of the screen.

- Split the mp4 up into pngs (better quality than jpgs) with ffmpeg.

- Process each png, filling the white caption areas with data from the nearest non-caption pixels.

- Join the pngs back to an mp4 (ffmpeg).

- Get the original audio with ffmpeg and merge it into the mp4, ffmpeg again.

The actual processing was with C# on Windows because that's home turf for me.

Lessons:

1) You need a lot of space for 200,000 decent quality .pngs

2) You need to be prepared to wait a few hours for the process to run

3) ffmpeg is blooming marvelous. https://ffmpeg.org.

I probably spent 20 hours on it, maybe more. I don't use it at all now, it was a one-off solution, but I occasionally see a video and think "I could run my app on that ... "

2143 1 year ago |

There are many tiny scripts I use at work to manage things. Mostly bookkeeping stuff like utilities to manage Jira, scripts that create text files as per a predefined template for meetings etc.

I'm the only one who uses it because these are tailored for my own specific use case, but if anybody from work asks I'm willing to share.

If I knew how to use Emacs, then maybe I wouldn't have needed some of these scripts.

-----

I have a huge list of movies I want to watch or have watched, and I like keeping track of those.

For the longest time I used Google Keep, but that couldn't keep track of dates when I added to the list or watched something off the list. And I liked my list to be sorted alphabetically and have it show the counts of watched and total etc.

Tonnes of apps and websites already do this. Or I could have probably built a spreadsheet file that does this. But I felt like rolling my own.

I built a simple webapp using Laravel and a little bit of Bootstrap to make the site look decent. Did it in one day during the less than a week of gap between resigning one job and joining another. Building it was therapeutic. I even bought a domain and hosted it on a DigitalOcean droplet. It's been up for over two years now.

There's nothing fancy about it. It really is just a glorified todo list. But I like the simplicity of it and I've been using it to keep track of movies to watch over the past two years.

I never had any intention of trying to promote it or anything. Initially I planned to share it with a few friends, but then I didn't. No reason.

So it's just out there in the web. In broad daylight. Anybody can sign up for it. Nobody has. Nobody knows. Hidden in plain sight. Just like me ;)

ReK_ 1 year ago | |

Check out trakt.tv

pridkett 1 year ago |

I’ve got two great examples of this. Both I use to help control DNS on my local network. They’re open source, but I doubt anyone else is using it, and I’m fine with that.

unifi-dns-scraper[0]: a simple tool that logs into my Unifi console to get all the hosts and then creates a hosts file that my local DNS servers can use.

unifi-doh-blocker[1]: as part of my efforts to better control my network, I don’t want random devices ignoring my local DNS by using DoH. This gets various lists of public DNS over HTTPS servers and updates a blocklist on my Unifi Dream Machine Pro. With a few other firewall rules this essentially forces all my DNS through local servers which then do encrypted DNS queries to a third party DNS service.

These tools make me happy and were fun to write.

[0] https://github.com/pridkett/unifi-dns-scraper [1] https://github.com/pridkett/unifi-doh-blocker

mutantgn0me 1 year ago |

I've got a...very large...Bash script I wrote in 2009 for interacting with my MP3 collection via email and icecast (there were more reliable email clients than Web browsers embedded in devices back in the day.) It's basically a queue manager for ices(1), with playlists, "programs", special handling for audio books, and regular radio DJ-like chatter delivered via Swift (weather updates, track info, inside jokes among my friends, that sort of thing.) A cron job keeps it going with random tracks. I've even added some old 50s and 40s radio commercials because hilarious.

It is madness in script form which will never see the light of day, but I've never succeeded in rewriting it or making a nice Web interface for it 'cause what I've got Just Works for me. I interact with this script almost every day, making it the single most-used software I've ever written, either professionally or personally. It's great having a self-hosted streaming service. Run via Bash.

Mwuahahahaha.

eterps 1 year ago |

I created a website that 'proxies' HN. Its main feature is to refresh only every 3 hours; otherwise, it displays the previous snapshot. I blocked access to the real HN on multiple levels (PC, router, DNS provider).

I spent 3 hours developing this tool. It prevents me from checking HN too frequently throughout the day, saving me a significant amount of time.

karolist 1 year ago |

I made a data takeout tool for the SaaS kindergarten communication platform used by my child's daycare. On it's own the software is really simple and could have been a few hundred lines of Python, but at some point I changed my mind and wanted to share this with other parents in case they find it, the things that make a project fit for publishing took 95% of actual work since you want it general and robust enough someone non-technical can use it. I now fully understand someone's reluctance to publish tools they wrote for themselves because it takes a lot of work.

https://github.com/karolistamutis/kidsnoter

zxspectrum1982 1 year ago | |

I find the use of docker on Windows totally overkill and added complexity for non-technical users. Why don't you just build a single .exe they can download and run? With Golang, that should be rather easy.

karolist 1 year ago | | |

You may be right, I considered that step but testing all this on another platform seemed too much, given I personally run this in a container pointed to a Synology photos mount point. I thought about wrapping all of this in a PyQT + PyInstaller combo with a simple button and distributing an exe for that. But valid criticism, appreciated.

Epaphos 1 year ago |

I wrote a few apps when I realized that I couldn't find anything ready-to-use for my tasks.

For example:

Conversion between .env and .json configs: https://github.com/magicxor/EnvJsonConv

Web scraping different platforms and sending results to my favorite messenger: https://github.com/magicxor/ExtensibleMessageBroker

Transformation of copied text using regular expressions: https://github.com/magicxor/ClipboardTransform

It usually takes 3-10 days to implement and polish the core functionality. Some apps I use on a daily basis (e.g., bots in my favorite messenger), and some 1-2 times per month.

rufius 1 year ago |

The static site generator for my personal website. It was something I wrote in an evening. The code[0] isn’t the best but it’s been easy to extend as needed.

It basically takes a couple json files for configuration, and some markdown.

[0]: https://git.sr.ht/~zacbrown/zsitegen

thomaslord 1 year ago |

A while back I was using Simple as my bank because their app was the best budgeting tool I'd been able to find. Once it shut down I moved to a spreadsheet, and by comparison it was super painful. I basically replicated the app's functionality as a webapp, with a few tweaks to better fit how I was using it. Currently I'm still entering transactions manually, but I'm slowly building a Plaid integration to automatically import transactions. I'd probably have it done by now, but my current bank made some changes that prevent me from connecting it to Plaid so I'll have to change banks again before the integration will be able to pull in 100% of my transactions. I can't say it'll never be publicly available, but I don't have any current plans to release it.

cookiengineer 1 year ago |

My github is littered with software I built as tools in the moment for myself.

The coolest thing in my opinion was [1] pacman-backup, which is a small (hacky) nodejs script to be able to download packages on one machine and be able to use pacman on another airgapped machine with the downloaded packages.

A couple months after I took down the repository I received a letter from the US where someone was asking me whether the repo is still maintained and whether or not it still works. As it turns out, the people of Cuba use Archlinux, too, and they used my tool to use flash drives to share updates.

I still think this is the coolest little tool I ever built, and I probably have to rewrite it in a more sane language (maybe go?) at some point.

[1] https://github.com/cookiengineer/pacman-backup

cranberryturkey 1 year ago |

Yes I built a player for official MLB, NFL, NBA and NHL streaming providers so I didn't have to keep switching apps.

Gormo 1 year ago |

I wrote a pair of PHP scripts that let me subscribe to YouTube channels as podcast feeds, with enclosure URLs and all. One script parses the channel's RSS feed and inserts enclosure tags, with the target URLs pointing to the second script with the video ID as a parameter. The second script then wraps youtube-dl and redirects to the raw video URL obtained for that video ID by youtube-dl.

This worked great for years, but recently, YouTube stopped serving their `22` format for most videos, which coupled 720p video with the audio stream. Now, the best resolution you can get with audio and video interleaved is `18`, which contains only 360p video. So that's the best resolution obtainable this way for now, unless I add a whole layer to this to reconstruct an interleaved video from separate audio and video streams selected from the DASH manifest.

throwanem 1 year ago | |

On the off chance you don't already know about it, yt-dlp can do that interleaving for you. Still a headache to add to the pipeline, but less to invent at least.

Gormo 1 year ago | | |

Much more than a headache, unfortunately: yt-dlp only remuxes the stream as a post-processing step after all streams have been downloaded. So this would take my nice on-demand stateless solution that just returns redirects to the raw video URLs from YouTube, and turn it into a stateful application that downloads and rehosts the video files on my own server.

To accommodate that, I'd then need to create a configuration layer that determines which feeds to download and when, since I wouldn't necessarily want every video posted on every channel I subscribe to downloaded to my server in advance.

So it turns the whole project into something quite different and much more complex. If there was something that could remux the streams and then pipe the output stream back out over HTTP, that would be more appropriate. Maybe I can work with bindings to FFMpeg to create something that would work here.

austin-cheney 1 year ago |

I wrote a media player and playlist that executes in the browser to play my media on my phone. I did this so that I don’t have to stream media or dick around with all the limitations imposed by the iPhone. I have playlists for music, movies, and television that are dynamically generated with meta data and file hashes.

KerbalNo15 1 year ago |

I have a lot of things like this. Mostly one-offs for bizarre stuff, like a FUSE plugin that saves data to FAT-formatted image files. Some things, though, I consider useful enough to post on Github for people who might need it. My favorite (and most-used, personally) is an app I made to copy files off of my Panasonic cameras. They still work perfectly well, but the official app no longer works to send pics via wifi. I had to reverse-engineer the entire protocol stack from network traffic, it's a doozy. I ended up implementing SSDP from scratch and faking DLNA server support, along with the miserable SOAP protocol. It's a beautiful mess, but it works. Got me back into Android development too.

https://github.com/kerbalno15/shutterlink

audiodude 1 year ago |

I built a headless CMS to generate the static site, https://bestalbumsintheuniverse.com.

The key feature is that you can put in a Wikidata ID (https://www.wikidata.org/wiki/Q1536639) and it will auto populate the name, artist, release date, and Spotify ID. It will then grab covert art from https://coverartarchive.org/, which it resizes and mirrors to S3 (previous versions of this project used images manually uploaded to imgur, but broke when they changed their secret API).

So basically all I have to do is write the description and I've got a new entry on the site.

Joel_Mckay 1 year ago |

Mostly stuff for hobby 3D metal printer projects that is still too kludgy to release into the community.

A ton of administrative tasks I automated with expect/tcl shells, and various instrumentation control test rigs over legacy GPIB (metrology project).

Other exploratory boring RF stuff that maybe 5 other people would care about. =3

jelkand 1 year ago |

Lots of outdoor gear brands are now selling repaired or refurbished used gear and clothing. Since used gear is pretty eclectic in selection it’s hard to find what you want by browsing at a random time.

I built a pretty simple web app that tracks a bunch of vendors and emails me when items matching my filters come in stock!

RobCodeSlayer 1 year ago |

I created a scraper that scrapes around ~30 different property management sites for new rental listings. It then sends me new listings on telegram

It’s been useful for finding new places for myself and my friends - we can usually get tours before the properties are posted on Zillow.

Though definitely against a few privacy policies

elric 1 year ago | |

I did a similar thing when I was in the market for a new house. It was ugly and very hackish, used as many of the built-in filtering features of the sites I was scraping, but did a lot more filtering in post processing. It really bugs me how so many real estate websites don't let you filter on arbitrary fields. Faceted search has been a solved problem for 20 years ...

drewbuschhorn 1 year ago |

I run a small Dwarf Fortress podcast, and I didn't like the transcription options when we started a few years ago, so I wrote some python glue to do diarization (separate out speakers) and transcription using a torchaudio project, and either whisper or openai depending on how I'm feeling that day. Works surprisingly well, with timestamps and clean-up:

https://github.com/drewbuschhorn/a_strange_mood_podcast_tran...

https://astrangemoodpodcast.com/2023/01/17/episode-1-is-dwar...

RelentlessOpt 1 year ago |

I wrote an app to analyze my Wordle play - I tell it my guesses (with the answer last) and it tells me how many possible answers were left after each turn, what the best next play was, and how my play compares to my current strategy. I use it every day.

https://scottlouvau.github.io/pwa/wordle-analyze/

I wrote the code over a few months, along with code to find optimal guesses, simulate games, and do earlier versions of game analysis.

It's written in Rust, originally as a console app, but now wrapped up with a very basic interface. I figured out how to get it running as a WebAssembly Progressive Web App so that I can use it on my iPad without connectivity and without having to submit to the App Store.

philip1209 1 year ago |

I run a little Rails app for myself. I end up putting some random things in it. Here's a partial list:

- My blog mailing list (Sendy) was having a bot signup problem. I wanted to deploy a captcha, but the mailing list software didn't support it. So, I put a simple proxy that validates the captcha before inserting the record to the software.

- Wanted a way to apply an email template to the Sendy mailing list, so I wrote a software that consumes my RSS feed, applies a template, and creates a draft in my mailing list software.

- Wrote a "Scoreboard" that aggregates MRR across Stripe accounts into a graph, and sends auto-emails to friends when I cross thresholds.

- Wrote a script that emails me when the HN "whoishiring" job goes live every month. (Simple crons like Zapier don't work)

There are a few other things in there, too.

alper 1 year ago |

Other people do use this: https://cuppin.gs/ but realistically I only make it for myself.

We have coffee venues from different parts of the world but they become red ("picked") only if I and my friends travel there. The main use case for the app is still me being somewhere--mostly in my hometown these days--opening up my phone and looking for a good cup of coffee. Other people can take or leave that proposition.

jonahbenton 1 year ago |

Bank and other statement PDF processing tools to feed records into Beancount. Because CSV downloads are not a legal record and are often not correct and contain no balances, and giving permanent access to aggregation services like Plaid and others are not worth the privacy violation.

emilburzo 1 year ago | |

Is any of the code public?

Or at least the tool(s) you use?

I have the same need but it's surprisingly difficult to get it right, at least with the `camelot` or `fitz` python packages.

jonahbenton 1 year ago | | |

No public code. This has been a long running project for me. Last I touched it- pre-LLM world- it had turned into a real Rube Goldberg machine. Hard to imagine anyone else putting up with it.

PDF to text (using either python or Java lib), which then is turned into a "header" structure with dates and balances via configuration driven regexes, and a "body" structure containing the transactions. The transactions themselves go through an EBNF parser to extract the date(s), narration, amount, and balance if reported. The narration text gets run against a custom merchant database for payee and categorization. It is a painful problem! The code is Clojure so there is not much of it, and there are high abstraction libraries like Instaparse that make it easy to use grammars as primitives. And the rube goldberg has yielded for me balance-validated data now for the last several years from half a dozen financial providers.

I have been incorporating local LLMs, running on an RTX 3090, into some other workflows I have, hope over the summer to see if those can help simplify some of the workflow.

luxuryballs 1 year ago |

I have a game engine that uses MonoGame and allows me to define entire behavior flows, animations, physics interactions, etc, “using one liner, execute once” method chaining declarations and avoid having to write any update/draw function code for basic things, it’s awesome.

athorax 1 year ago |

I made a CLI tool that templates out jira tickets so I never have to open the jira web client to create tickets. It took me far longer than it could ever possibly save me in terms of time, but it's the small victories over horrible, bloated, corporate software that give me joy

utensil4778 1 year ago | |

This reminds me of one of my favorite projects.

I once wrote a discord not that interfaced with our Jira system. I wrote a whole chat interface that walked users through the steps required to produce a useful ticket, and they got thrown into a user report category.

The interface was quite thorough and basically forced users to follow a template designed to exctact the relevant details. You could even upload files or screenshots.

It was quite popular with power users as well as our own team. But most importantly, it gave angry users a place to complain instead of directly yelling at a developer.

It was over 10 years ago and I think it's still the project I'm most proud of. The bot as a whole was extremely complex and could interface with several external applications like google sheets and trello. It also had a very nice feature where it would answer my DMs for me. I was a pretty public figure in the community and got a lot of messages that would be better answered by just asking in the general chat. The bot would (respectfully) explain that I can't give 1:1 support to everyone and direct them to better support channels. It also explained that if something really did require my direct attention, I could still be reached by sending another message. Almost nobody ever did. I couldn't believe how effective it was. The DMs still existed in my inbox, but the bot marked them as read so I wouldn't get notified. I'd review them occasionally, I never found any false positives.

But of course that kind of thing is ancient history and will get your discord account banned nowadays. Using a bot to log in as a normal user has been prohibited for a long time. Too bad.

lylejantzi3rd 1 year ago |

I've mostly been writing bookmarklets lately.

I wrote a bookmarklet that flattens the comments on a substack comment page and orders them by date. It makes it easier to see the most recent comments. https://bookmarkify.it/64936

I'm a member of a private social media site whose UI I dislike, so I tapped into their phoenix websocket connection and I created my own web client. It's vanilla js/html/css using template literals as html templates. It kind of reminds me of those old template systems I used in the php 4 days. Anyway, the killer features for me are regex filters on content and seeing all of the replies from the people I follow.

osigurdson 1 year ago |

I recently made a cli chatgpt interface. Quick hack in Rust, always planned to clean it up, not entirely sure where the source code is for it anymore but I use the compiled binary all the time.

The regular chatgpt interface is nice but sometimes don't want to break out of the terminal.

liamYC 1 year ago | |

Did you get ChatGPT to help you write this and is one of your main use cases generating bash commands? (Code writing code, there’s a total feedback loop happening here) I did too but wrote mine in Python. A compiled language would be much faster and using their streaming function I’m yet to implement. Any other ways you can increase the speed?

osigurdson 1 year ago | | |

I don't think language would matter much as the primary delay is getting a response from OpenAI apis. The advantage of Rust (or other similar language) is you get a simple single executable. Otherwise Python is completely fine.

I basically use this any time that I am in the terminal already and have a question that I think could reasonably be formatted fine there. I'd say, I use it for 30% (conservatively) of my ChatGpt queries. Naturally the web interface is way better for lots of stuff, but sometimes breaking out of a terminal session is jarring.

DownrightNifty 1 year ago |

To anyone in the US who said they make their own apps for their own iPhone: do you really pay Apple $99/year for that "privilege", or do you reinstall the app every 7 days (or use workarounds like AltStore non-PAL or jailbreaking) to get around this?

nozzlegear 1 year ago | |

I pay $99/year. With the amount of money I make, it’s a really trivial sum for the convenience. Plus I could use it to add Apple OAuth to my web apps if I wanted to.

EvanAnderson 1 year ago |

I maintain a fork of tt-rss[0] that I use to follow blogs, podcasts, and YouTube. I wrote a podcatcher that used the back-end database, too.

I forked it back in 2005 because the maintainer wasn't interested in the direction my patches were going. My version has diverged dramatically from the current version.

I have no idea how many hours I've put into it over 19 years. It has needed surprisingly little care and feeding (which I'd attribute to it being a simple PHP app).

I've used it nearly daily in the last 19 years.

[0] https://tt-rss.org/

Edit: I also maintain a set of scripts to import my SMS from phone backups into my IMAP mailbox. Having a single place to search for my written communication is wonderful.

okaleniuk 1 year ago |

I wrote myself a debug tool at 2007. It's a piece of GUI "to borrow". A Windows app that catches Windows messages addressed to it and shows things in its own windows. It can show numbers you give it, give numbers back, count calls, and measure time. So it's a kind of debugger/profiler/GUI.

I open sourced it 8 years ago but it was not the original intention. I wrote it for myself. https://github.com/akalenuk/16counters

I wrote it in MASM32. It's therefore a tiny .exe file of about 7 KB. I spent maybe a few hours initially, but I've been adding features one-by-one for several years. I use it a few times a month.

geophile 1 year ago |

- Markup to generate HTML I used in courses that I taught. The markup generated links according to an outline (next/prev page, next/prev section) and a few other navigation related things.

- Python-based pipe-objects-not-strings shell with cluster and database support deeply integrated. Twenty years later, it has turned into Marcel (https://marceltheshell.org), and I’m still the only one using it AFAIK.

- Backup utility for Linux, with characteristics of Time Machine. Been using it for five years, it keeps daily, monthly, yearly full backups, relying on hard links for files that don’t change. Handles both local and remote (to my Raspberry Pi).

kyle_u 1 year ago |

I’ve spent five years and 100KLoC building https://github.com/kyleu/projectforge which helps generate and update other Golang projects I maintain. I use it daily.

bevesce- 1 year ago |

I scrape all of the food, wine and beer recommendations that I find and display them on a map in a web app. I can see the list of all of the places that are closest to me: restaurants, wineries, ice cream parlors, breweries and so on. If the source of the recommendation scores places or products made by it it's part of the data and I can filter by the score. I probably spent many weeks working in it. I'd love to make it a business but I have no idea how to approach the legality of it. I use it all the time because I travel a lot.

SCUSKU 1 year ago |

A few years back when I was looking for apartments in SF I wrote a craigslist scraper that would filter based on my preferences. I probably could've just used craigslist's built in filters + email alerts, but where's the fun in that?

booleandilemma 1 year ago |

I see questions like this and I can't help but wonder about the motivation behind them.

dinkleberg 1 year ago | |

My guess is they are looking for inspiration for personal projects to work on.

I think it can be easy to get caught up in the software is for business mindset and forget that there is an infinite number of use cases for things you could build that can just be for fun or personal/small community benefit.

acrophiliac 1 year ago |

I built a bot to play my favorite word game on Android. It's not technically against the TOS but certainly against the spirit. It gives me an inordinate amount of satisfaction watching it autonomously playing the game and winning every time.

sirodoht 1 year ago |

I've made frank! It's just a CLI wrapping pquerna/otp:

https://github.com/sirodoht/frank

I use it all the time in combination with pass:

$ frank $(pass hetzner.com | sed -n '4p') | c

hugocbp 1 year ago |

I created a personalized finance app based on a Google Sheet that I used to track my registered account contributions and performance.

Basically I enter the transactions and it shows a dashboard of my contribution rooms, how much is left, how much I have already contributed, etc.

Nothing fancy, but it just just a Remix frontend with MantineUI backed by an SQLite db inside Dropbox. Took me about 6 hours, and I only made it after I botched some changes I made into the Google Sheet that broke a bunch of formulas.

I thought about making it into a public app, but it is so tuned to what I want that it is probably not really that valuable to others.

I use it every time I save. Used to be weekly but lately monthly.

inbetween 1 year ago |

I wrote a cross platform outliner 20 years ago that I have been using almost everyday since. I have more than 60'000 headers in there, with my notes about everything.

Right now I'm building a flutter/kotlin meditation timer for myself.

heuermh 1 year ago |

All the time!

My most recent were tools to improve the AWS commandline experience for s3 and Athena

https://github.com/heuermh/cooper

https://github.com/heuermh/sea-eagle

Both are available via Homebrew

https://github.com/heuermh/homebrew-parquet-tools

I would next like to improve the TUI experience for tabular data, e.g. using the Charm_ Bubbles/Gum table component, but I have yet to investigate how the JVM <--> Go interaction might work.

ivylee 1 year ago |

I created

- SignalsTalk[1] to study quantitative trading signals and algorithms, for my own curiosity.

- YCVerify[2] for verifying YC companies and founders. No one else is using it yet.

- Content Credentials API[3], to find the signatures of AI generated content.

I'm also working on:

- A search engine for online ads.

- A way to track grocery item prices from receipts using LLMs.

[1]: https://www.signalstalk.com/

[2]: https://www.ycverify.com/

[3]: https://contentcredentialsapi.studioxolo.com/

cardamomo 1 year ago |

I wrote a little Swaybar script that displays the current weather. When I hover over it, I can see the hourly forecast and a few other details. It's not perfect, but I prefer the simplicity over a fully-fledged application.

fcarmona 1 year ago |

I'm a web developer so I try to fix all my problems with javascript, one of them is maintaining my Plex library across multiple server migrations. I made this little helper I use as a bookmarklet to get a movie's name from an IMDB page in the correct format that Plex will identify without issue: https://gist.github.com/carmona/09cd03fddeb7db25ace42a21cf3d...

emarsden 1 year ago |

I have a smartphone app that scrapes replay TV listings for a few shows that I like to watch at the gym and allows me to download the low-quality media stream to the phone to view offline ad-free.

I released the Rust library that downloads and reassembles media segments from a DASH stream (https://github.com/emarsden/dash-mpd-rs). Won't release the web scraping bits because they are against website terms and conditions, and because annoying countermeasures will be implemented if too many people use them.

spikey_sanju 1 year ago |

I created https://uiino.com (painless planning for your app with AI).

As a product studio, we spend hours brainstorming and creating user flows, feature ideas, and edge cases. I prototyped a solution on a weekend and now we use it daily, saving time.

We released it publicly after a few months. We work on it every Friday, finding it enjoyable.

P.S. Got a startup, app, or website idea? Just describe it in plain language. Uiino's AI will generate your story maps in under 10 seconds. It's FREE! (No account required!)

mlhpdx 1 year ago |

When I first started doing web programming I built an “asynchronous HTTP” thing that shuffled requests from a public facing server to SQS, and read respond from another SQS. The idea was keeping applications and their data very isolated from the public users.

Over the decades it evolve to a generic proxy that takes IP network traffic (UDP, ICMP, TCP and TLS) traffic, slices it into messages and forwards to AWS services (bidirectionally for Lambda and Step Functions, unidirectional for S3, DDB, SQS, SNS, Firehose, etc.). I use it liberally to avoid running “servers”.

KaiMagnus 1 year ago |

I wanted to say my Figma plugins that I made for myself, but I published them so it doesn't count.

When I was around 15 I wanted to try out Win Forms. I also used to play a lot of Dota 2 so I created this app to calculate how many Techies mines would to take down a hero with X HP. Complete with sliders, input field, radio buttons and checkboxes to select ability levels and items. Pretty sure it will never get published, but the .exe is still sitting on my desktop.

https://liquipedia.net/dota2/Techies

claystu 1 year ago |

I coded a simple, attractive Calorie Tracker that works across desktop, tablet, and mobile:

https://www.calories.claystuart.com/

silvanocerza 1 year ago |

Yup, it's a stupid tool in Rust to keep my soundbar alive.

Turns out that JBL thought it's a good idea to completely cut sound when there's nothing playing and ramp it back up in a perceptible fraction of second so that you miss some part of whatever you're listening to. This is especially annoying when watching anything with people talking.

Here's the code for anyone interested, it also contains a more thorough rant in the README.md. https://github.com/silvanocerza/orpheus

notacoward 1 year ago |

Yeah, since I retired four years ago the only things I've worked on have been like that.

(1) A script to solve a resource-allocation problem in Grim Dawn (ARPG).

(2) A tiny bit of code added to Garmin's developer kit, to pick apart their .fit files and show me some running metrics that were hard to get at otherwise.

I do have one other thing I've been wanting to do recently, which might even be worth putting out there if/when I finish it. Then again, maybe not. Having been a maintainer for a project with hundreds of contributors before, I can say that coding for oneself feels very liberating. Only as much infrastructure and process as necessary to get the job done. No need to deal with feature requests or bug reports. No commit races, or battles in code-review comments. You know the requirements perfectly (or have a perfectly compliant customer who is willing to change) so if you want to take a short cut you can. I was often a stickler for doing things "the right way" when I was working, but part of the reason I left is that my work seemed to be all about shepherding the process and not the joy of making code grow and do new things. Having total freedom on a project, even a small one, is good balm for a jaded programmer's soul.

airstrike 1 year ago |

I wrote an app that takes all localized strings in an Xcode project, turns it into a json, batch translates it with the OpenAI API, validates the json, and then converts it back into a .xcstrings file that you can drop into your project. I was writing an app that I wanted to translate into X different languages, of which I only spoke a couple and not perfectly, and this was the solution. It turned out pretty good.

I've considered putting a little bit more elbow grease and turning into a packaged product but I'm not sure if there's demand for it out there.

Sancty 1 year ago |

I got really into breathwork a few years ago. For the longest time I struggled to find an app that had anything more than basic functionality. Also, I found it absurd that most wanted to charge a subscription fee.

I ended up creating my own application that lets me create advanced, multi-stage exercises. I spent time building the trimmings that I felt other applications were also lacking such as: background visuals with procedurally generated shaders, easy gestures, etc.

I think one day I'll publish it to the app stores so other people who had similar desires have something.

ChuckMcM 1 year ago |

Yes. But the list is too long to put in a message here. Generally tools which do things that I needed done at the time, like convert PDF bank statements into CSV transaction files that can be ingested by a simple ledger application.

I always have a 'hacks' directory in my home directory of code that does something I need doing. Sometimes I use it again and again, sometimes its a one-off that answers a question.

I'm more curious though about the motivation of the question. What was the observation that got you to wonder about this?

emilburzo 1 year ago | |

> like convert PDF bank statements into CSV transaction files

I've tried this recently and it's surprisingly difficult. Any pro-tips?

Extracting pdf tables, while respecting the cell position, seems almost impossible in a way that works in all cases (think borderless tables, whitespace cells, etc)

ChuckMcM 1 year ago | | |

It is remarkably difficult and continues to provide a good example of the limitations of LLM based systems.

In my case, I used perl, and exploited the fact for for a given bank, the statements are consistently formatted. Further, PDF OCR conversion responds consistently to the documents with the same formatting. With this combination, it is possible to extract the characters and numbers that are associated with transactions from the document, and then to take those extracted bundles of text and transform them into lines for a CSV file.

The caveat is that it works for only that bank, that "kind" of account (usually checking, credit card, or savings), and when using that specific document OCR tool. Within those constraints it is eminently reliable but utterly non-transferable to a general case.

julianlam 1 year ago |

My blog (devnull.land) — I stood it up in a day or two, could run on a potato, and uses GitHub Gists as its data store. (More info: https://devnull.land/github-gist-blog)

My VoIP provider supports SMS, and exposes an API. The community-made app wasn't performant enough, so I cobbled together my own interface in a couple evenings. Then one day some dependencies shifted and it wouldn't start on the latest Node :\ Oh well.

lurn_mor 1 year ago |

I wrote a hacky PHP web app that allows me to generate 5" Optical Media artwork for imprinting using a inkjet disc printer. My script loads it's own truetype fonts (to stay on brand) and produces print-caliber artwork in milliseconds, instead of minutes. I spent a single day mastering it, and have used it weekly for decades, saving untold hours of effort. Alas, this side of the business is failing due to lack of demand (who has an optical drive anymore??), so this code will also die someday.

dougdimmadome 1 year ago |

A few I can think of

- Note taking app that stores all data as markdown on Dropbox

- When I was getting married I created a photo upload site with a flickr backend where people could bulk upload all of the photos they took of our wedding, and as a result we got thousands of photos without needing to chase people up for memory cards etc.

- Every year I organise Secret Santa for all of my family and my wife's family through a PHP web app I wrote.

willhackett 1 year ago |

I've made an email-based AI personal assistant I thought I'd roll into a business, but ultimately have kept it for personal use. I may open source this as it's a fun project built entirely on Cloudflare Workers (with the exception of one Postgres DB & mail routing).

I've written some really crappy Notion API (before the official API) to act as a CMS for a headless site.

I'm at a weird point in my life that I need to work on these little hacky projects because they bring me genuine joy. It's like lego to me.

jasondigitized 1 year ago | |

What does the personal assistant do?

willhackett 1 year ago | | |

I can CC it on emails to handle the back & forward of booking meetings - quite handy when I need to organise with a group of people.

It can also send follow-ups at set times on my behalf or handle some vague inbounds. It's not the best, but it's ok.

arusahni 1 year ago |

I wrote a series of scripts that parse song names from my music blog RSS feeds, match them against my music service of choice, and then build 200-track playlists for me to consume. It's a great way for me to eliminate some of the drudgery of music discovery, especially in niche fields.

It's a series of Python scripts backed by SQLite and reverse-engineered API clients for various music services. Over the years I've switched the backends from Google Play Music/Youtube Music, to Apple Music, to Tidal.

scottshea 1 year ago |

I created a little game for my daughter when she was 3. She would press a button and it would show a random picture. If the picture was her, it played a little song and said You Win.

1in1010 1 year ago |

While there is a plethora of Python back-testing and trading platforms, I was frustrated with many of them for a variety of reasons and ended up creating my own. This now drives the back-end of my website https://sugradh.com. Not sure if this is what you have in mind but I have spent more time(years) doing this than I should have. But when something goes wrong or does not work I know where to look and fix it.

hitchstory 1 year ago |

I created a command line app for applying jinja2 to orgmode. I did it to scratch the itch of being able to generate pretty latex PDFs for my CV and for printed letters with content from my note taking app on my phone.

I published it on pypi/github out of habit, but it's primarily about scratching my itch and I doubt anybody except me will really use it. There's some interest in doing this type of thing with org mode but it all centers around LISP and emacs (neither of which I like).

imclaren 1 year ago |

Great question! Most of the articles I read only focus on apps with multiple millions of users, but most software has a much smaller user base.

I assume that most things I build will only be used by me and a small group of users, and sometimes will also eventually be used by others. I generally only build tools that I use every day. For example:

- iCloud/Dropbox alternative macOS, iOS, and web app

- task management GTD macOS, iOS, and web app

- photos api for digital photo frames

- media management

Mostly built using go for backends and SwiftUI for macOS and iOS frontends.

tnvmadhav 1 year ago |

I dogfood almost all my side projects and a few are open for the public as well.

My most used (by me) software is my social media posting tool (twitter/x). It's public but I've disabled signups (due to free tier posting limits since Elon's acquisition)

> How did you make it?

It's written in Django and hosted on DO

> How often do you use it?

Almost everyday :)

Others are used intermittently and they include image generator, screenshot tools for iOS and macOS, etc.

smokel 1 year ago |

I've written a fully functional emulator for the Philips P2000T, my first true love [1].

As I still haven't found a way to legally ship it with a ROM (partially copyrighted by Microsoft), I'll keep it to myself. If anyone happens to know someone who knows someone at Microsoft willing to help me with this, please let me know.

[1] https://en.wikipedia.org/wiki/Philips_P2000

wchandler 1 year ago |

I built a checking program in C# to mainly use as a check register and balancing tool. Doesn't do double entry accounting. Also build a simple notes program in both C# and python that can use the same data file. Also did a cheap and dirty internet radio player on an old Rasp. pi. Used one push button to cycle thru a list of internet radio feeds. Plus an led that flashed the index of the list which gave me an idea of which station I was on.

carom 1 year ago |

I wrote a desktop client for an IPTV service. They have a mobile app and Apple TV app that are good, but there was not a good way to watch on the computer.

I threw together a Python QT app that parses the show listings, displays them, allows filtering, and has some short cuts for searching IMDB and trailers on Youtube. The best part is that the media opens in VLC instead of some custom player.

Anyway, I will never publish it because of the whole facilitating copyright infringement thing.

Gualdrapo 1 year ago |

Just silly stuff as my development abilities let me do - the most "significative" one is a remote control to, ahem, control my TV from my pc (to save some batteries from it and some peace of mind so I don't need to look for the remote control every time) - as a KDE Plasmoid w/ QML and some Javascript via IRCC-IP. It broke in the KDE5->KDE6 transition but I'll fix it, try to improve it and share it when I have some spare time.

javier123454321 1 year ago |

I have like a dozen bash scripts that automate little actions locally. They each took from a few minutes to a few dozen minutes to make. I use them all the time at work.

ozfive 1 year ago |

I brute forced the IR codes for my Cambridge Audio CXA81 amp, wrote a web server in go that has endpoints to correspond with the actions, wired up a Raspberry Pi Zero W with an IR transmitter, and wrote a Android app as a virtual remote control that connects over WiFi to the webserver on the Raspberry Pi Zero W. I wanted to control my amp from anywhere in my house and Cambridge Audio didn't make that Amp controllable through their app.

andruby 1 year ago |

We use planning poker when evaluating our work tickets. I built https://pokershirt.dev as a small app for use to vote and reveal the votes simultaneously.

Created with an early version of Phoenix (and re-created with LiveView)

Here's a link to a room so you see it with multiple users: https://pokershirt.dev/r/hn

RBerenguel 1 year ago |

Weave: https://github.com/rberenguel/weave

It's hard to explain what it is. Think personal knowledge manager text editor inspired by Acme. The readme and video there are very outdated, I add features faster than I update that (as the only user this is what I get). I post videos of new features on twitter though, as a reminder to myself of where I passed through

sohzm 1 year ago |

Made a browser app which used androids web view, added a few buttons and gave it to a friend and forgot about it. About a year later he messaged me he still used that dumb app. Lol

Also made a notes app for Android that just had one text view with only options to edit text and save it. Used it for years for pasting random stuff, and gave it to a twitter friend and forgot about it. Connected with that friend years later and he said he used that app as well :)

wewtyflakes 1 year ago |

A `jshell` wrapper that inherits the classpath of the current Gradle project. Wrote it using plain Bash, and it comes in handy when working with Java projects.

kitallis 1 year ago |

Yes!

The two most used ones in the past few years:

WAP – a small utility to control my balcony-local drip irrigation system https://github.com/kitallis/WAP

hisaab – expense tracking and categorizing because my bank doesn't do apis and sends credit card reports in PDFs https://github.com/nid90/hisaab-clj

automatic6131 1 year ago |

I control the RGB Leds of my gaming PC from the command line. And the overclock on my GPU based on the daily temp (this is just a few lines in a shell though).

WalterBright 1 year ago |

I wrote a program "syncdir" that will synchronize two directories. I use it every day for making backups. I originally wrote it for DOS eons ago.

pipes 1 year ago | |

This reminds me of Microsoft's sync toy:

https://en.m.wikipedia.org/wiki/SyncToy

axegon_ 1 year ago |

Plenty as a matter of fact. Two large ones off the top of my head.

First one: cloud services are expensive and come with a lot of overhead. However I do enjoy the idea of lambda/cloud functions a lot but I didn't want to rely on cloud services for them, especially since I have a ton of hardware to self-host stuff. So I built a service which piggybacks on DIND where I could add templates for such lambdas for a few languages(just rust and python cause that's mostly what I use) where I can allocate some resources and build tiny containers. In order to avoid wasting resources, they are all off by default but through the magic of what I build(management and something like a reverse proxy + container management for DIND), I can call an endpoint, which will check if there is a container to handle the requests and proxies the request and response to and from it or it will spin up the container, do the same and shut it down after a pre-defined amount of time. You could argue that I could have achieved the same with minikube or k3s but this has proven to use a lot more resources compared to a single rust binary I can run on anything x86 with docker on it. The downsides are that I can't distribute it across multiple servers so it only runs locally. But that fits my needs perfectly. There might be some people that would be interested in it but I never got to open sourcing it so I'm the only user. I've been planning to open source it "next week" for the past 2 years or so.

Second one: I love data. Specifically unstructured, raw data and I've been collecting a ton of articles from the internet over the past 2 years or so. The ingestion involves a pipeline that automatically processes them and extracts data/makes them a lot less unstructured: events, locations, timestamps, what has happened where and all that jazz. It's a long list of ml models, data transformations, validations, 3 llm's fighting each-other and a bunch of other stuff. Kinda feels like a child to me so I don't want to open source it. I know that I could hypothetically convert it into a product and make some money off it but my past entrepreneurial experiences have been very unsuccessful, I have limited time and lack motivation. So at the moment I'm simply enjoying the data getting spit out on a grafana dashboard such as this [1].

[1] https://i.imgur.com/fAoQghk.png

piloto_ciego 1 year ago |

I have a notepad I built in Python that I really like. I keep a running list of notes in it that’s always available by typing “notepad” into the command line.

I have soil moisture sensors for my wife’s plants (and an air quality sensor) that’s generating a constant stream of sensor readings. I wrote my own OTA updating code for that because I was frustrated at having to plug in sensors to update the code.

I have a few calculators too.

piloto_ciego 1 year ago | |

Oh I forgot, I’m building our own version of that Life360 app for my family.

That code will likely never see the public light of day.

torstenvl 1 year ago |

I think most software developers create software that's specific for their own use, not for release.

A big chunk of these are proof of concept programs, test code that is good for trying an idea but won't be complete enough for a test suite in the end result.

Others are random data fixes when you're migrating file formats or end up with a bad CSV or something.

I have a toy program that just tells me what a keystroke looks like via raw mode.

goddamnyouryan 1 year ago |

This link orginization tool: https://link.horse

The key is using the bookmarklet.

Epskampie 1 year ago |

Yes, I've got a shopping/todo/whatever list app that I made for myself and my girlfriend. So far it has multiplayer editing, offline mode, suggestions when adding, scraping ingredients from a recipe site we use. I love that I can just add random things that I need like that last one. I hate the multiplayer syncing, it's kinda brittle. I guess I spent around 20 hours on it.

codingdave 1 year ago |

Quite a few, but the one that may be unique is a tool that scrapes the location data from an eBird list of rare birds sightings in my area and pops up a map for me, so I can see if any birds have been sighted near me that I don't already have on my personal birding list.

It only took about 15 minutes to throw together into a bookmarklet, so it was a really low effort, but I use it daily.

zem 1 year ago |

https://github.com/martindemello/anthill

does fairly basic word search stuff, and there are lots of more sophisticated programs out there, but none of them run in a linux terminal and that's what i wanted. i have it constantly open in a tab, for various word game related things.

pryelluw 1 year ago |

I have a forever project that is only meant for my needs. It’s basically a web app with a bunch of tools to make my life easier. Things like a links board, blog engine, event tracker, and more. Now I’m adding an llm to include better search abilities. The thing is pretty nice and fast. Uses a simple architecture because I don’t want to spend a lot of time maintaining it.

ecesena 1 year ago |

https://priceeth.github.io

First commit was 8y ago. It's the only tool I've been checking consistently multiple times/day.

Originally react, recently (like 2y ago lol) I rewrote it in svelte focusing on page speed and added some minor features like changing the symbols to track in local storage.

idatum 1 year ago |

Often for me, it's building my own software around another FOS project. Home Assistant (HA) is a good example. I have several sensors that I collect via my own Zigbee, BLE, and RTL-SDR clients which output readings as MQTT messages.

The only thing HA does it display them via their MQTT sensor/event entities. I'm not a big fan of developing UIs.

mynegation 1 year ago |

I was unhappy that bike share app in my city does not do a good job displaying availability of bikes or docks on the map so I wrote my own web app that gives me color coded availability of bikes and bike docks near my home, my typical destinations, and my current location (geolocation is supported, had to figure out https for it).

Simon_ORourke 1 year ago | |

I'll go one better, the bike sharing app in my city exposed an API which I scraped for a few weeks and then built a predictor for the nearest stations to work and my home given a certain day, time and station "loading".

beretguy 1 year ago |

Currently working on a hub of “simple apps” which currently include a basic social network and car maintenance tracker. I plan to keep adding more useful apps, for example next on my list is budgeting app. Also will make it a PWA so that I can get notifications for example about posts from friends or maintenance reminders and such.

plondon514 1 year ago | |

Also working on a budgeting app because everyone on the market is so annoying to use. Designed from the ground up just for my wife and I, we both love it: https://porkybank.io

wonger_ 1 year ago | |

How does the social network function if you're the only user? Is it a custom frontend to some common social media?

vishalontheline 1 year ago |

I've made some quick stuff:

- Created an /etc/hosts file switcher script to swap out websites that I allow myself to visit during working and non-working hours.

- My ISP provies dynamic IP addresses, so I created a IP address updater script that lets Cloudfront know my updated IP, to among other things, host a website from a personal computer.

_jsdw 1 year ago |

I made Highscore (https://github.com/jsdw/highscore) just for the purpose of keeping track of high scores with somebody on a few karaoke games that didn't track individual peoples scores.. never been used for anything else :)

sawaali 1 year ago |

I made a music app for iOS for myself, after not finding anything that did what I wanted as a non-streamer: visualization, audiobooks support, section loops, bookmarks, sleep timers, import from any source, etc.

In the end, I did put it on the App Store (after months of cleanup!) but it's easily the most used app on my phone.

suriya-ganesh 1 year ago |

I've written a bunch of web apps, extensions and bots to help me with tasks, taking notes on articles and books.

KolenCh 1 year ago |

A static site generator tailored for my own need.

A python package to code up reusable TeX expressions, which is used in the said site generator.

A python library for trip planning which let my wife make plans using Google MyMaps and Excels and then my library syncing them up and also shows some visualization in Jupyter Notebooks.

junon 1 year ago |

I created a component downloader from Ultra Librarian that imports directly into an in-repository KiCad library, along with models, metadata (Mouser ID, arrow ID) etc.

It was named out of annoyance so it doesn't have the most 'appropriate' name so I'm probably never going to release it. But it works very well.

ryanisnan 1 year ago |

I wrote a python program to accept in a list of lumber cut dimensions I want, and it determined the optimal cuts per board, taking into account blade length.

It minimized waste, and told me exactly where to cut.

Valord 1 year ago |

About 3 years ago I wrote a web app to make browsing and categorizing my YouTube subscriptions easier. I can, for example, select the music category and see all videos posted by channels I have marked as music. Really simple stuff backed by a sqlite db.

I spent a total of probably 20 hours on it and use it 5/7 days a week.

igniuss 1 year ago |

A framework to make presentations in svelte and markdown files, exports to a static website on GitHub, used it for roughly 12 presentations so far, a lot of them programming focused. I tried a bunch of different ones but none that made it painless enough.

Also a bunch of Obsidian plugins, to have nicer macros and templating.

winchester6788 1 year ago |

I made https://github.com/notAI-tech/fastDeploy for ease of use of deploying Deep learning models.

Except me and the team at my company nobody uses it.

After I made it lot of solutions came in this space, but IMO this is the easiest one to use still.

hakfoo 1 year ago |

A little Python/Tk script that scrapes weather.gov data and provides an icon with the local temperature and a forecast dump. It was sized to fit the fairly large-iconed dock of my X11 desktop and be a bit more modern than old WindowMaker dock apps.

benstein 1 year ago |

I made my own webmail client in 2001. The killer feature was a Heart button that one-click opened a new mail addressed to my then-girlfriend-now-wife. I've never seen that feature replicated then or now. And since it was hard-coded to my girlfriend, it was clearly (hopefully!) not broadly applicable.

JensenKarlsson 1 year ago |

I made a PWA for Miniflux because I'm a doomscroller deluxe and wanted a similar experience for my feeds [1]. It's nice to be able to tailor something for my needs specifically.

1. https://github.com/wolfhechel/sidor

endofreach 1 year ago |

Most of the software i write is for my own use. But to be fair, most doesn't see any light of day still.

xnx 1 year ago |

I couldn't find any existing tool or technique to condense periods of low motion frames in long videos so I wrote my own Python/ffmpeg utility with the aid of Google Gemini.

I love the results, though I have a strong hunch that there's probably a different processing approach that would be 10x faster.

fwsgonzo 1 year ago |

I made a scripting solution for my game, mainly to keep motivation up. I really like writing an maintaining a high-quality emulator, while game development can be a slog sometimes. I believe this has kept me from losing motivation and perhaps it can be attributed to me one day releasing that game.

grogenaut 1 year ago |

When I was growing gourmet mushrooms I was just sending data from esp32s and humidity/temp sensors to grafana/graphite on my nas. A few hundred loc total.

Many years before that I did sports arbitrage. Wrote my own xpath system before xpath for it. Worked great.

awesomestartups 1 year ago |

I used to have python scripts that I wrote for my own use as the java packaging manager for a bank. Java versions are a moving target so it was difficult to build something that was generic and would work with each new release. I had to tweak things with most releases so I never published it.

paulcole 1 year ago |

I have a bunch of single-purpose Google Docs extensions that I use every day at work. For example one sets permissions on Docs based on groupings of users that I have set up (HR only, Finance only, Leadership Team only, Just me).

I think it took me like an hour to make and I use it several times a week.

rldjbpin 1 year ago |

a lot of cool projects here, but i will share my relatively mundane ones:

- made a tool to import all of my local music library to a spotify playlist by analysing the music itself. used a music tagging api to analyze a small section from the middle of the track to get its details. went through the effort because some of the music i had was very old and i did not keep up with updating their media tags.

- i finetuned musicgen on instrumentals of some of the music i like. i now have an interface that randomly generates a short track, which can sometimes create a nice banger. cannot publicly release due to licensing issues.

call me lazy and selfish, but i only bother doing things outside work if i am really interested in it and want to do it for myself.

dhuan_ 1 year ago |

I built mock, an api tool and testing utility to be able to quickly manipulate API responses and act as a proxy server at the same time.

After some time, I decided to open-source it:

https://dhuan.github.io/mock/

onassar 1 year ago |

Bookee: https://onassar.github.io/extensions/bookee/ Chrome Extension to navigate my bookmarks a bit easier (I use the keyboard shortcut 50+ times a day)

ReK_ 1 year ago |

I wrote something to bulk download my library from Bandcamp and actually packaged it as an excuse to mess with github actions: https://github.com/ReK42/bcamp-dl

bachmeier 1 year ago |

I wrote a productivity app for myself (basically my implementation of GTD). There are a gazillion such apps out there already, so I don't see a reason to share mine. I did it because everything else was either too complex to be practical or too simple to be useful.

eternityforest 1 year ago |

At various times I've made apps for my own use. I tried a few times to do a DIY notes app.

But I usually find that the hassle of having to maintain it at random times whenever some platform changes happens, or else not be able to use some important feature,vis just not worth it.

textlapse 1 year ago |

I would love to hear from people who created their own esoteric programming language or a game engine with no game in sight.

[It does speak to a time where people create something they truly are passionate about but may not fit into the typical optimization of PMF, growth etc.]

klauserc 1 year ago | |

I built a crappy scripting language. The language itself is nothing special. Vaguely ECMAScript. But it was a ton of fun to _evolve_ the language and runtime system over the span of ten or so years.

I have my collection of scripts in that language, some of which were in regular use for a time, and I wanted the changes I made to be as backwards-compatible as possible. Those were some really fun design challenges. Like: "how do you retro-fit a module system into a language that essentially started out with PHP-style source transclusion for re-use?".

zzo38computer 1 year ago | |

I made a game engine called ZZ Zero (which is a ZZT-like game engine, and runs on DOS). There is no game other than an example.

[0] http://zzo38computer.org/prog/zzzero.zip

darzu 1 year ago | |

I've made https://sprig.land, a webgpu-based game engine and have plans to transpile the whole thing into a new visual scripting language I'm inventing but I'll eventually share it and do want to make games with it.

You might enjoy following https://mastodon.gamedev.place/@lisyarus, but he does ship games.

marak830 1 year ago |

Voice controlled gaming assistant. Think of it as a copilot. I've since added overlays and responses.

Edit: As I think on it more (it's been a few years since I dusted it off), added multithreading so some commands could process over time.

It was a great learning experience.

ezzabuzaid 1 year ago |

I built January.sh to finish more backend projects in less time.

Most of my freelance work is API development and most of it are repetitive tasks so I thought I could solve this through compiler generator.

Early this year I decided to open it up for others, still beta though

tealpod 1 year ago |

https://HelloEle.com is a Cli tool to upload, download files with numbers.

I built it in the process of teaching a cli tool. Which I extensively use to move files between computers, especially to servers.

lelanthran 1 year ago |

Yes. My task tracker works better for me than anything else I've tried over the years (decades, even), including every single one showcased on HN.

It's quick to start, non-laggy to use and matches my thought process exactly. Has both a CLI and a GUI.

makz 1 year ago |

I'm currently writing my own hashmap implementation. The goal is to make something small, simple, reliable, and that anybody can quickly integrate into their own projects. So far it has taken me around 40 hours and it's 95% done.

Dachande663 1 year ago |

Yes. Several.

- My blog, which has lots of weird pages for stats, time jumps, old games/tools/utilities. - Flight tracker app. - Home control app (because HA was a pain to keep updated). - Wood working tool helper for my dad.

And more. It's liberating.

jasondigitized 1 year ago | |

What’s the wood working tool do?

steveridout 1 year ago |

I've got a bunch of scripts to handle my finances, both personal investments and to help with certain parts of my company tax reporting.

Among other things it uses ChatGPT to extract structured data from PDF invoices for reporting expenses.

galfarragem 1 year ago |

A chrome app to help me visually acknowledge new crypto coins that reach the top on coingecko. I use it daily.

I made also a custom spreadsheet that solves the same problem but an order of magnitude more precise. I use it weekly.

burn_cycle 1 year ago |

So many, it's why I got into the field I suppose.

Like everyone else, I have a hacker news client, which is "universal" (in the Apple sense), and is made around how I use the site. I might even release this one, one day.

qsdf38100 1 year ago |

Most of my projects are like this. I’ve lost hope of convincing anyone of the usefulness of anything that’s not trendy.

I’m most confortable with modern C++, win32, boost, and I love templates. Everything everybody loves to hate.

michidk 1 year ago |

https://github.com/michidk/vscli

It allows me to launch vscode projects and devcontainers I often work on very quickly. Saves me so much time!

j45 1 year ago |

All the time

Many little handy scripts and tools I might even put in front of a web script to share.

None meant to see the light of day or ship.

One way to do it is just list them on a public website for yourself to use

Let seo pick them up and you’ll see if anyone wants it too.

SoftTalker 1 year ago |

I pretty much stopped writing code for myself/as a hobby when I started writing code as my day job. There really is something about losing passion for a hobby once it becomes work, at least in my case.

wtngfnncl 1 year ago | |

Sadly, I did the exact same.

I went from writing my own tricked out Web 2.0 blog, writing my own 6502 NES games, writing myriad utilities and scripts to… remodeling my home, learning how to operate and maintain a pool, work on vehicles, garden and homestead.

I think in hindsight my hobby isn’t programming, it’s learning and I just enjoyed learning programming and kicked out into a good career.

sosborn 1 year ago |

My favorite personal project is a Japanese-English dictionary with full-text search (thank you JMDICT: https://www.edrdg.org/jmdict/j_jmdict.html).

It's a Rails app and includes a flashcard system to help me study. It also emails me a daily list of 5 vocabulary words to study.

I use it all the time and it took about a month to get it into a state where I felt comfortable deploying it. I'm about to add a feature that will use the devices camera to scan and extract a vocabulary list from the image using OCR (I'll use this when reading Japanese text).

It's useful for me, but more importantly, it's fun.

rqtwteye 1 year ago |

When I was freelance I had my own accounting software. I added things as needed and over the years it got really powerful. The whole thing was written in VBA with MS Access as backend.

vborovikov 1 year ago |

an online store item price watcher - saved me some money while shopping online

a feed reader - I was never satisfied with other feed readers so I've built my own

small utilities I use from time to time

All these apps were in active development for at least a year each and were deployed to my home server where they continue to work to this day. I fix bugs and add new features when I have time. Many of my apps use the libraries I publish publicly. It's always a pleasure to work on my own projects.

broast 1 year ago |

I use a notepad I created for myself where each line displays a timestamp of when it was last modified, for my personal note taking workflows. Html/vanilla js.

olalonde 1 year ago |

Coded a microcontroller that allows me to open my gate using my phone so I don't have to carry the gate remote around. Also convenient when I have guests.

rpastuszak 1 year ago |

Yeah, quite a few! Here's the list: https://untested.sonnet.io/Projects+and+apps+I+built+for+my+...

Two highlights:

Enso (https://enso.sonnet.io) - I use it every morning and generally keep it open throughout the day: https://untested.sonnet.io/Stream+of+Consciousness+Morning+N...

Sit. (https://sit.sonnet.io) - I use it every morning and on some afternoons (I start my main job after lunch)

I made those for myself, and made them public after chatting with friends/colleagues, that's why they're available online now.

I also have a bunch of small scripts/apps/productivity tools (automate boring job tasks).

jim_lawless 1 year ago |

A set of Python PIL scripts for generating background / wallpaper montages. One of the output montages is here :

https://jimlawless.net/magsbooks.jpg

A Perl script that formats a bbcode-like markup to HTML for some of my web pages.

A mostly-Powershell script that stops all Windows features and apps that I don't want running. Some features/apps start up again after Windows updates, so this shuts them back down.

Some SMTP/POP3 scripts that I use in various languages to automate email management.

An ffmpeg script that converts an MP3 coupled with a static image to an MP4 so that I can upload podcasts to YouTube. I did provide this on a Twitter/X post once, so maybe it's not something I've kept to myself very well.

Some ffmpeg scripts to convert M4A audio file to MP3.

I have a web page that just displays the current time every second that I use when timing things. It's all very simple client-side JS.

...and others.

jasondigitized 1 year ago | |

Run magazine!!!

dirteater_ 1 year ago |

I hate flashcards so I made my own app for studying Chinese after finishing HelloChinese. Very similar interface, but allows me to bring my own content.

arnavpraneet 1 year ago | |

this might help me though- I am in the same boat

fullstick 1 year ago |

I made a compass app for when I'm driving. Shows direction, speed, and coordinates. Doesn't work of you're not moving. I love it.

hobs 1 year ago |

A recipe scraper and rehosting website that nobody cares about but me, a slack/mumble/link checker/duper and chat logger, a bunch of arduino/espressif stuff to manage and control little projects like a home gardening, a suite of database synchronization, troubleshooting, and monitoring tools.

denvermullets 1 year ago |

some very cool projects here!

the app i use the most is a simple budget app, no connecting to external accounts. just built w/react and uses localStorage for storing info. i think i spent like a week on it and i definitely am the only one using it. https://simplebudgetcontrol.com/

another app i still use is an app that tracks my magic the gathering collection, ha. rails/react and lots of outdated frontend code that i started to refactor and then realized i'm the only one using it so who cares haha. https://www.99staples.com/collections/denvermullets/9

i just recently started working on my own event server in rails (similar in idea to mixpanel) and have it deployed for my portfolio site.

love starting projects and getting them rolling. i wish i could just work on stuff i cared about all the time honestly

stefanve 1 year ago |

created a car selection script, that collected data from several platforms, reliability data, occasion adverts, safety data, reviews and specs.

I used it to buy a secondhand car based on several parameters (price, doors, features, reliability etc) and by assigning weight to the parameters

Python in total a day or so of work (including tweaking and adding features) only used it a couple of times to buy a car

sghiassy 1 year ago |

I wrote some scripts that convert my Quickbooks accounting data into detailed reports that are insightful to me and beautifully printable

hdjY28 1 year ago |

I built a macOS app to securely encrypt my personal files. My password is converted to a key that’s used to decrypt files

binary132 1 year ago |

I wrote a portable Lua based build tool for C and C++ that I use pretty religiously. I have no plans to publish it.

heintzsight 1 year ago |

I built a payroll system for my business.

heywire 1 year ago |

Personal finance application, use it weekly.

Plenty of scripts and stuff to automate and data log various things in our household.

nashashmi 1 year ago |

I built a tool to upload photos to arcgis. never saw the light of day. but I had nothing against sharing it.

SinisterAlex 1 year ago |

I created a pollution-tracker app with functionality so i can track pollution i remove and GPS-tag it.

croisillon 1 year ago |

most software i created were made in a couple of weeks for mostly one person (with me dogfooding as much as possible of course):

- text format conversion for a former coworker

- bookmarking for my sister

- calendar & bank account "manager" for my gf

- local weather log for my former boss

mharig 1 year ago |

I made a CLI password manager with Python.

It uses PBKDF2HMAC and Fernet to encrypt a SQLite DB.

01HNNWZ0MV43FF 1 year ago |

I've made myself a couple music players over the years.

Around 2007 VLC and friends didn't automatically obey play-pause buttons when they were minimized, even though most dedicated music players did. But I found the dedicated ones like Amarok difficult to use. So I made a GUI music player that basically shuffled my whole collection and let me play, pause, skip, and play the previous track using my laptop's media keys. I miss that laptop.

Later I made a web-based so I could listen to music at work without loading pirates music onto a work system. This one isn't as good, but at least Firefox automatically handles play-pause for me.

Also it's a huge bugbear for me that someone decided soft buttons means we can combine the play and pause buttons. Let them be idempotent! Sometimes I want to be sure it's paused!

My next project is a thing to replace Jellyfin, and I might actually publish that, so I won't get into details.

By amazing coincidence someone published a similar project here on HN right after I started on mine. But I have different features planned for mine so it's fine

Oh yeah I used those music players nearly every day, especially the web one since it also works on my phone. I probably put 200 hours into the desktop one and 50 into the web one. The desktop one was a case of having to also learn a GUI framework, and gstreamer, plus it supported a couple of Internet radio stations and just had way more features than the Web one.

tpoacher 1 year ago |

I mean, others can use it too if they want, obvs, ... but, yes.

e.g. my misc-updater, I use daily, to check Manually-Installed / Source-Compiled (MISC) packages for updates! [0]. Works like a charm.

I also do all my bugtracking / milestone planning via my bashtickets program too (Ticketing for the terminal using structured textfiles. Implemented in bash. [1]) though technically this is still under development as it still lacks a couple of features "others" might reasonably need. But for me, it's already perfect at doing what I need it to; I've already worked with colleagues on some pretty large academic projects with this, where all we had was access to an ssh server with no gui and no root access! Works great, and is git friendly!

[0] https://git.sr.ht/~tpapastylianou/misc-updater

[1] https://git.sr.ht/~tpapastylianou/bashtickets

ceritium 1 year ago |

keepthis.site its open, i did It for me, there are some signip but i think i am the only active user.

Also consumebefore.jose.gr and a few small tools you can find on my blog.

uptownfunk 1 year ago |

why does everyone make their own note taking app - is it easier to specify the app in code than to build an app that gives you what you want?

cfeeley 1 year ago |

I wrote a tool in Haskell that continually polls my city's (Toronto) bike share API and dumps it into a database, along with a web server component that does a bunch of on-the-fly analysis of the data and serves that up as various visualizations and stats.

I got so frustrated with my city's bike share program one night and I wanted to figure out whether the problems I had been having were widespread or not.

Surprisingly enough there's a standard for bike share APIs [0] that my city adheres to. I'd been looking for an excuse to learn Haskell and figured the best way to stay motivated was to make useful tool for myself.

I've been working on it for the better part of a year at this point (probably >200 hours) and I use it roughly daily. After gathering a few months of station-level data it became clear enough that the system (specifically, how the e-bikes are handled) has some pretty serious issues.

I ended up sending the city a couple of freedom of information requests for some data I was missing and for the contract between them and the company that operates the system. The contract says that the operator gets paid a fee for every dead e-bike they move to a charging station - regardless of whether or not that bike actually manages to charge.

The city owns around 2000 e-bikes and there are frequently times where a whopping 20 are available - the rest are out of battery, sitting in docking stations for multiple days. Occasionally the operator shuffle the bikes over to the handful electrified charging stations, and about half the time the bikes don't charge (they just completely fill the stations, meaning nobody can use them - one of those stations happens to be right outside my partner's place). Then 4-7 days later they come around in a truck and get rid of the bikes, and the whole cycle repeats again in a couple days.

Basically, we're getting fleeced by the system operator. It isn't even clear to me if it's intentional or not, or just the usual combination of lax municipal oversight and an apathetic operator.

I've been meaning to send my data and the contract over to a few reporters who care about that sort of thing, since (a) the bike share system is genuinely a great way to get around (when it works) and (b) financially it's really good value for the city [1], and I'd like to see the problems fixed (especially given that the city is planning on massively expanding the e-bike fleet).

[0]: General Bikeshare Feed Specification: https://github.com/MobilityData/gbfs

[1]: The per-trip subsidy is $0.67, versus $4.08 for a trip on our transit system (!)

willhslade 1 year ago | |

Please send this to the Star, they love this sort of thing. I also think they've worked with the Open Data Meetup group in Toronto and they may be able to put you in touch with the right person.

Doches 1 year ago |

I’ve probably made dozens of tools for myself that no one else uses, but — sort of by definition — none of them are publicly available. Who needs my orchestration app, access control UI, or Jenkins replacement? Nobody, that’s who.

But a few years ago I took a couple weeks out and polished up one my personal tools for public use, and since then it’s seen exactly one other user. So, uhh, I guess that counts? It’s called Saascast (https://saascast.io), and it builds revenue forecasts based on your Stripe subscription data. Took me probably two weeks to build, and required maybe half an hour of maintenance per month on average.

I use it every.single.day, though.

EddieLomax 1 year ago |

bookmarking system, made for me by me

https://bookerics.com

publicdaniel 1 year ago |

All my software

spacecadet 1 year ago |

Tons. Lots of little games, a complete suite of data ETL tools, lots of stupid ML projects I never made public. A repo full of AI interpretability scripts, a private RAG bot, several private MoA type bots, extensions of nmap and wireshark for my side businesses, lots of payloads... I also like to try and implement papers for fun, I have this stupid toy that does deepfake detection using line detection, perspective checking and some ray tracing.

Much of it is absolute hacky python garbage that Im fine adjusting to my needs, but don't need the burden of it being in the public.

Timshel 1 year ago |

Does not strictly match the "will never see the light of the day for anyone else."

But forked an ActivityPub server (GoToSocial) to proxy Rss feeds (https://github.com/Timshel/RssTooter).

Spent a couple of days on it initially (but had made something similar for Nitter before). Mainly use it to track Xkcd and software release outside of Github.

Ey7NFZ3P0nzAe 1 year ago |

I'm a medical student with FOMO and who loves AI stuff. I have about 70 public github repos that nobody uses even though I take pride in at least trying to use good code and documenting everything.

Here's a highlight (edit: more like an ego dump)

I couldn't keep up with my news so I made the perfect summarizer that goes through the thought process of the author : https://github.com/thiswillbeyourgithub/DocToolsLLM/

I needed an AI based system that go through my anki cards, but might as well make it able to read dozens of file formats. Now I can put entire medical youtube playlists, conferences, anki databases, hundreds of PDFs and ask a single question across all of them at once : also https://github.com/thiswillbeyourgithub/DocToolsLLM/

I couldn't keep up with my anki review so I made an embedding based review reranker (one of my first ever project!) : https://github.com/thiswillbeyourgithub/AnnA_Anki_neuronal_A...

I needed to make my sleep more efficient : micropython to the rescue : https://github.com/thiswillbeyourgithub/sleep_tracker_pineti...

I wanted to store everything and anything in Logseq ttps://github.com/thiswillbeyourgithub/LogseqMarkdownParser and https://github.com/thiswillbeyourgithub/LogseqPDFImporter

I was so late for my medical exams I needed to learn FAST : I made an incredible app that turns hours long recordings of you talking aloud while reading your PDF into hundreds of flashcards that learns to mimic your style by using previous validated answers etc. Using stt and LLM. This one is not out yet but will be.

Also I made scripts that automatically reformulate old bad anki cards into more appropriate ones.

As well as creating complex mnemonics stories and images automatically added to your anki cards. Not yet public.

I needed help to sort through my many todos so I made an ELO based reranker made to be used in the CLI (careful, wet paint) : https://github.com/thiswillbeyourgithub/mini_LiTOY

I wanted my anki OCR to be more legible so I made tesseracts try to preserve spacing : https://github.com/thiswillbeyourgithub/OCR_with_format

I lost my voice for some time but needed to be heard so I made speech.sh : https://github.com/thiswillbeyourgithub/speech.sh

And quite a few others.

irskep 1 year ago |

I wrote a web site builder that I only use to host my indie bands' web pages. It's got a very silly backend vs the potential target market (musicians) in that it makes you write Markdown, so I don't have delusions of grandeur, but it works well for my simple hosting needs and lets my bandmates make changes without going to git.

brink 1 year ago |

I made aquinas for myself. The source code is out there, but I don't think anyone else uses it, but I use it almost daily. https://github.com/codabrink/aquinas

It's a media player that sits in the console.

kleiba 1 year ago |

Isn't that the majority of software one makes?

windowshopping 1 year ago |

Yeah, built an entire magic the gathering sandbox to play online with friends because I wasn't happy with existing options. Mentioned it once in another thread here but have otherwise never shared it.

jimnotgym 1 year ago |

Yes, and I won't even tell you about it

impossibleline 1 year ago |

I love to build things, and it's especially fun to build stuff that solve my own problems, but it's tricky to find enough time for larger pet projects on top of a full-time job, so most of my personal projects tend to be smaller scripts that try to do one thing well, and require little maintenance. I have created a plethora of scripts over the years that help me avoid doing boring and repetitive tasks and save me time in the long run. As I wrote these scripts for myself, these are either too opinionated, or depend on some of my other scripts/libs, and not well documented, so it's problematic to share with others. To name a few:

- A bash script to easily keep track of and manage multiple git repos. There are many similar projects out there, but I couldn't find one that fit my needs exactly.

- Bash scripts that automate most of the periodic backup, update and cleanup process on my various machines. There are many things to backup (e.g. git repos, documents, notes, calendars, and other apps) and update (e.g. OS, packages from various pkg managers, plugins, stuff installed with standalone scripts) and most of these things can be automated to spare a ton of time in the long run.

- Scripts to declutter my downloads folder, which used to be a mess. E.g. automatically rename and neatly organize the downloaded invoices, warranties, movies, series, etc where they belong.

- Bash+pup+jq scripts to generate RSS feeds for websites that don't provide one, or not good enough, so I don't have to scroll through each one every day. E.g. new cinema releases, new products, and some blogs with no/insufficient RSS.

- A web change monitor script that periodically fetches web pages, extracts the relevant content with pup+jq+pandoc, and then commits and pushes it if there were changes. GitHub provides an RSS feed of the repo changes with a link to an excellent diff interface. E.g. product promos, and wall-of-text changelogs.

- A price tracker script, that uses pup and jq to extract the price of various products and notifies me of about price drops using a telegram bot to spare some money.

- Bash scripts to automate the process of setting up various operating systems with the necessary tools I need on a bunch of machines, and to version control the config files, so I can easily set things up again without having to spend a lot of time with the migration, or worrying about losing sth.

- Bash & powershell scripts to debloat Android, Windows, Mac and some Linux distros from the unwanted, performance hogging, and privacy-invading pre-installed crap and "features".

- Userscripts to reduce unnecessary distractions and annoyances on the web. E.g. debloat Google, YouTube, Reddit, re-enable copy-paste, Jira ticket UX improvements.

- Python code and shell scripts to semi-automate double-entry accounting with beancount.

- A ton of small scripts for more efficient work ...

yellowapple 1 year ago |

I routinely turn any task I need to do more than three times into a script that automates it. I've published a couple of these, like

- This pair of scripts for starting an RDP session with a resolution matching the size of the current window (from back when I was using herbstluftwm): https://gist.github.com/YellowApple/6e6134b7493485aa3e56f255...

- This script for running Windows programs in a specified Proton-managed Wine prefix (though nowadays there are better tools for this): https://gist.github.com/YellowApple/8f91daf000153195e643e8d7...

- This script that populates ID3 tags for MP3 files I've downloaded (via youtube-dl or yt-dlp or whatever) based on their filenames and folder structure (so that I can easily play what I want from a USB stick plugged into my truck's head unit): https://gist.github.com/YellowApple/7b9cc54cf6fbc20bf79cf240...

but a lot of them I've never gotten around to uploading, and most are buried away on old machines (or backups thereof) or lost forever on employer-owned machines that got presumably wiped after I left.

This post did, however, inspire me to go back through some of those backups and look through some of those scripts. Some results after a few minutes of spelunking and reminiscing:

- A couple Perl scripts that would convert hex digits into eight-dot Braille characters (to represent a fictional country's number system, back when I was actively roleplaying on NationStates.org as a teenager)

- A trio of Perl scripts to turn CSVs into SQL insert/update/upsert statements (possibly related to the time I accidentally blew away some of a prior employer's production data; we couldn't bring down the whole DB to do a normal SQL Server restore, so instead I pulled up the CSV dumps of the relevant table (for our ETL pipeline) and used those to build the necessary inserts/updates to restore what got deleted)

- A one-liner `tr '\r' '\n' < $1 > $2` called "mac2unix" because I was trying to import a CSV into SQLite for some analysis but the sender created it on a Mac and of course the default spreadsheet app still uses lone carriage returns for linebreaks like it's nineteen-eighty-fucking-nine

- Another one-liner `exec xdg-open "$@"` called "open" (don't remember why; maybe because people kept sending me shell scripts written on Macs?)

- A whole bunch of other little scripts to populate toolbars from my herbstluftwm-using days

- A bunch of scripts to generate ZPL code to print various labels on Zebra thermal printers

bcl 1 year ago |

yes.

davidguetta 1 year ago |

Nope

"title": "Tax Disclosures", "slug": "tax-disclosures", "original_text": "[FIRM NAME] does not render legal, accounting, or tax advice. Please consult your tax or legal advisors before taking any action that may have tax consequences.", "summarized_text": "Consult tax/legal advisors before actions with tax consequences.", "parent_rule": null