IME, there's one big thing that often keeps my programs from being unaffected by byte order: wanting to quickly splat data structures into and out of files, pipes, and sockets, without having to encode or decode each element one-by-one. The only real way to make this endian-independent is to have byte-swapping accessors for everything when it's ultimately produced or consumed, but adding all the code for that is very tedious in most languages. One can argue that handling endianness is the responsible thing to do, but it just doesn't seem worthwhile when I practially know that no one will ever run my code on a big-endian processor.

If you are using C/C++ for any new app, there is a possibility you are writing code that has a performance requirement.

- mmap/io_uring/drivers and additional "zero-copy" code implementations require consideration about byte order.

- filesystems, databases, network applications can be high throughput and will certainly benefit from being zero-copy (with benefits anywhere from +1% to +2000% in performance.)

This is absolutely not "premature optimization." If you're a C/C++ engineer, you should know off the top of your head how many cycles syscalls & memcpys cost. (Spoiler: They're slow.) You should evaluate your performance requirements and decide if you need to eliminate that overhead. For certain applications, if you do not meet the performance requirements, you cannot ship.

TCP/IP is big-endian, which is likely the largest footprint for these concerns.

"htonl, htons, ntohl, ntohs - convert values between host and network byte order"

The cheapest big-endian modern device is a Raspberry Pi running a NetBSD "eb" release, for those who want to test their code.

https://wiki.netbsd.org/ports/evbarm/

Unless you're dealing with binary data in which case byte order matters very much and if you forget to convert it you're causing a world of pain for someone.

He even has an example where he just pushes the problem off to someone else "if the people at Adobe wrote proper code to encode and decode their files", yeah hope they weren't ignoring byte order issues.

(2012)

Original thread w/104 comments:

https://news.ycombinator.com/item?id=3796378

Really except for the networking (including say Bluetooth) nobody is big endian anymore. So how about just don't leak that thing from the network layer.

And do not define any data format to be big endian anymore. Deine it as little endian (do not leave it undefined) and everyone will be happy.

This is a reasonable way to do things, and I've used it before. However I just used Zig's method here, and like it a lot: https://ziglang.org/documentation/master/std/#std.io.Reader....

Given a reader (file, network, buffers can all be turned into readers), you can call readInt. It takes the type you want, and the endianess of the encoding. It's easy to write, self documents, and it's highly efficient.

As a games coder I was glad when the xbox 360 / ps3 era came to an end; getting big endian clients talking to little endian servers was an endless source of bugs.

The other case where it matters is SIMD instructions where you're serializing or deserializing multiple fields at once, but the SIMD operations are usually architecture specific to begin with and so if you shuffle bytes into and out of the native packed formats it will be specific to the endianness of the native packed format, and then you can forget about byte order outside of those shuffle transformations.

What he said: if you read bytes with some byte order, you compose them yourself correctly, no byte swapping but just reading byte for byte and convert them to the number value you need. The architecture byte order is implicit as long as you use the architecture's tools to convert the bytes.

Rust, for example has from_be_bytes(), from_le_bytes() and from_ne_bytes() methods for the number primitives u16, i16, u32, and so on. They all take a byte array of the correct length and interpret them as big, little and native endian and convert them to the number.

The first two methods work fine on all architectures, and that's what this article is about.

The third method, however, is architecture-dependent and should not be used for network data, because it would work differently and that's what you don't want. In fact, let me cite this part from the documentation. It's very polite but true.

> As the target platform’s native endianness is used, portable code likely wants to use from_be_bytes or from_le_bytes, as appropriate instead.

I don't like these ambiguous titles. From the title I thought I was going to read that byte order doesn't matter when in fact the title should be "a computer's byte order is irrelevant to high-level languages". At least, state the fallacy in unambiguous terms one sentence right away. In any case, was an interesting read.

> If you wrote it on a PC and tried to read it on a Mac, though, it wouldn't work unless back on the PC you checked a button that said you wanted the file to be readable on a Mac. (Why wouldn't you? Seriously, why wouldn't you?)

As a non-SWE, whenever I see checkboxes to enable options that maximize compatibility, I often assume there’s an implicit trade-off, so if it isn’t checked by default, I don’t enable such things unless strictly necessary. I don’t have any solid reason for this, it’s just my intuition. After all, if there were no good reasons not to enable Mac compatibility, why wouldn’t it be the default?

Edit: spelling error with “implicit”

Be aware that if you actually want to do as the article prescribes, don't just copy and paste -- you shan't take anything at face value in C: https://news.ycombinator.com/item?id=31718292.

He's right that you shouldn't use ifdefs, but I think a macro like le32toh() is far clearer and more concise than a bunch of shifts and ors.

Also, a lot of comments in this thread have nothing to do with the article and appear to be responses to some invisible strawman.

The byte order matters in all cases where there is i/o, being files, network streams, inter chip communication,... For data that stays on the same processor or for files that are only accessed with the processors of the same endianness, there really is no issue, even when doing bit manipulation.

If Network Byte Order wasn't a thing, we could all just pretend big endian doesn't exist outside of mainframes.

Characters are not necessarily 8 bits. So you need to do a bit more to have true portability.

Unless you’re writing code to decode image file formats.

Once upon the time I became the de facto admin for a VxWorks box because my code was to be the bottleneck on a task with a min throughput defined in the requirements and we weren't hitting the numbers. I ended up having to KVM into it and run benchmarks in vivo, which meant understanding the command line which I'd never seen before.

People were understandably concerned that we had fucked up in the feasibility phase of the project. Lots of people get themselves in trouble this way, and this was a 9 figure piece of hardware sitting idle while our app picked its nose crunching data, if we didn't finish our work on time during maintenance windows.

But I was on my longest hot streak of accurate perf estimates in my career and this one was not going to be my Icarus moment. It ended being tweaks needed from the compiler writer and from Wind River (DMA problem). I had to spend a lot of social capital on all of this, especially the Wind River conference call (which took ten minutes for them to come around to my suggestion for a fix that they shipped us in a week. After months and months of begging for a conference call).

A memcpy should not be slow. It should be nearly as fast as generic memory copying can be. Most of the time you shouldn't even hit the actual function, but instead a bit of code generated by the compiler that does exactly the copy you need.

The compiler can optimize this. See https://gcc.godbolt.org/z/hxW7hhrd7

  #include <cstdint>
  uint32_t read_le_uint32(const uint8_t* p)
  {
      return p[0] | (p[1] << 8) | (p[2] << 16) | (p[3] << 24);
  }

ends up as

  read_le_uint32(unsigned char const*):
          mov     eax, dword ptr [rdi]
          ret

This works with Clang and gcc on x86_64 (but not with MSVC).

My uses of mmap have only over been memoization. Where I didn't care about byte order, and instead just assumed the files wouldn't be portable between any two computers.

If you are going zero copy, you either need to give up on any kind of portability, or delve deep into compiler flags to standardize struct layout.

maybe i'm missing something because I don't code network drivers but wouldn't it be something like...

if it's little endian (on the wire), the process would be like:

    (value[0] | (value[1] << 8) | (value[2] << 16) | (value[3] << 24))

and in big endian (again, on the wire, architecture endianness irrelevant) it would be the same thing with the indices reversed, where "value" is the 4 bytes read in off the wire?

> memcpy slow

Uh...

Compared to doing nothing, yes it's "slow."