network.http.referer.XOriginTrimmingPolicy
The following is pulled in from `https://soc.me/assets/js/turnBack.js`:
const undesirables = [
"news.ycombinator.com/",
// "reddit.com/", // disable temporaily
"lobste.rs/"
] ;
if (undesirables.find(site => document.referrer.includes(site))) {
window.location.replace(document.referrer);
}
https://github.com/soc/soc.me/blame/main/assets/js/turnBack....
Although, when we inspect author's profile on lobste.rs, we'll see that he's banned:
https://lobste.rs/~soc [Banned 4 years ago by pushcx: Troll.]
Maybe he's banned from HN as well. And this 'undesirables' is a method of taking some kind of revenge.
The CPU also doesn't care if you use prefixes that aren't valid for a specific instruction, for example a REP on a non-repeatable instruction. The LOCK prefix is the only prefix that makes the sane choice to reject invalid combinations, rather than silently accept them.
Also, the (E)VEX prefix doesn't behave like the other prefixes: it must be placed last, and can therefore only appear once. All other prefixes can be repeated.
When AMD designed the 64 bit extension, they had run out of available single-byte opcodes to use as a prefix and decided to re-use those. The INC/DEC instructions are still available in 64 bit mode, but not in their single-byte encodings.
https://soc.me/interfaces/intels-original-64bit-extensions-f...
where there are links to a couple of patents filed by Intel in 2000, about a 64-bit extension of the x86 ISA, which had been implemented in Pentium 4, but which had been nonetheless disabled and hidden from the users, in order to not compete with Itanium.
The page explains the content of the patents.
As already mentioned by another poster, at least on Firefox you have to open a tab and then copy this link there, to avoid being identified as an "undesirable" :-)
I've seen benchmarks that go both ways in terms of a "winner" but in terms of overall variance there seems to be very little. There are some cases where ARM64 or RISCV do better and there are some cases where x86_64 does better. I can't see code density being a relevant factor when picking one ISA over another.
We've got good compilers now anyways.. outside of power consumption.. the ISA wars are dead.
But as you point out, code density gets far less attention in tech circles these days. And higher-level decision makers rightfully focus on higher-level system performance metrics.
This is a pretty huge caveat. >90% of cpus are <1W (usb cables, wifi cards, storage controllers etc), and 99% are <10W (phones, lots of laptops)
This is one of the reasons why the x86 could be extended so much. PAUSE is just REP NOP, for example. Segment prefixes in front of conditional branches were used as static branch prediction hints (which I believe have returned in some newer Intel CPUs). Useful if you want to make a hint on newer CPUs that is harmless on older CPUs.
Some prefixes have become part of the encoding for certain SIMD instructions, but that is a different case because those prefixes aren't hints.
The correct behavior for allowing future extensions has already been introduced by Intel with 80186, in 1982, which has introduced an invalid instruction exception, to be used for all undefined instruction opcodes.
This behavior was unlike 8086/8088, which happily executed any undefined instructions, most of them being aliases to defined instructions.
For any opcode where current CPUs generate invalid instruction exceptions, it is very easy to define them in future CPUs to encode useful instructions. Had REP NOP generated exceptions in old CPUs, it would have been still fine for it to become PAUSE in current CPUs. Unfortunately, the designers of Intel CPUs have not always followed their own documentation, so not all invalid opcodes generate the exception, as they should. The non-enforcing of this condition has led to the existence of even commercial programs that are invalid or of compilers that generate officially invalid instructions.
It is true that there are a few cases when Intel has exploited the fact that some encodings were equivalent with a NOP on old CPUs, by reusing them for some instruction on new CPUs, where this allowed the execution of a program compiled for new CPUs on old CPUs. However this has been possible only for very few instructions, e.g. for branch direction hints, when not executing them on old CPUs does not change the result of a program.
In general the reuse of an opcode for a new instruction, when that opcode does not generate exceptions on old CPUs, is very dangerous, because the execution on old CPUs of a program compiled for new CPUs will have unpredictable consequences, like destroying some property of the user.
Your example with PAUSE is also one of the very few examples, besides branch hints, where the execution of a new program on old computers is not dangerous, despite the reassignment of the opcode.
Some time ago there was a discussion about a bug in some CPU, but I do not remember in which one, where the bug was triggered when the order of the REP prefix and of the 64-bit REX prefix was invalid, but the invalid order was ignored by the older CPUs instead of generating the appropriate exception, which allowed the execution of invalid programs, which did not have any bad effects on old CPUs, but they triggered the bug on that specific new CPU.
The new CPU should have been bug-free, but also the programs that triggered the bug should not have existed, as they should have crashed immediately on any older CPU.
* Some instructions require VEX.L or VEX.W to be 0 or 1, and some encodings result in completely different instructions if you change VEX.L.
* Different bits of the EVEX prefix are valid depending on the opcode byte.
* Some encodings (called groups) produce different instructions depending on bits 3-5 of the modrm byte (the second byte after all prefixes). Some encodings further produce different groups depending on whether bits 6-7 (mod) of the modrm byte identifies a register or not.
* Some instructions read a whole vector register but only a scalar if the same instruction has a memory operand. Sometimes this is clear in the manual, sometimes it is not, sometimes the manual is downright wrong.
* Some instructions do not allow using the legacy high-8-bits registers even though they don't do anything with bits 8 and above of the operand: they only want a 32- or 64-bit register as their operand.
* APX (EVEX map 4) looks a lot like legacy map 0, but actually a few instructions were moved there from other maps for good reasons, a few more were moved there for no apparent reason (SHLD/SHRD iirc), and a few more are new.
* REX2 does not extend SSE and AVX instructions to 32 registers even though REX does extend them to 16.
* Intel defines a thing called VEX instruction classes, which makes sense except for a dozen or two instructions where it doesn't. For these, sometimes AMD uses a different class, sometimes doesn't; sometimes AMD's choice makes sense, sometimes it doesn't.
And many more that I found out while writing QEMU's current x86 decoder (which tries to be table based but sometimes that's just impossible).
There is even an instruction where AMD got this wrong! VPERMQ requires VEX.W=1, but some AMD CPUs also happily execute it when VEX.W=0 even though that is supposed to raise an exception.
As in a suffix??? or a post prefix (suf prefix??? Brunch-fix!)
Anyway, the user named 'soc' on HN has "listbite" in the description. I saw this profile, but I think it's not the same guy. But also I wasn't sure so I didn't paste the link to HN at all.
The vast majority of laptops and mini-PCs uses more powerful CPUs. While 15 W CPUs were normal many years ago, when Intel launched the "Ultrabook" campaign, in recent years, due to better cooling, most laptops and mini-PCs use 25 W to 30 W CPUs, and a significant fraction of them (bigger than the fraction of the laptops/mini-PCs that uses <=10 W CPUs) uses CPUs with a TDP between 35 W and 65 W.
The reason is that the number of useful instructions that are only performance hints or checks for some exceptional conditions, so that if they are ignored that does not have bad consequences, is very limited.
For the vast majority of instruction set extensions, not executing the new instructions completely changes the behavior of the program, which is not acceptable, so the execution of such programs must be prevented on older CPUs.
Regarding the order of prefixes, Intel has made mistakes in not specifying it initially in 8086 and in allowing redundant prefixes. The latter has been partially corrected in later CPUs by imposing a limit for the instruction length.
Because of this lack of specification, the various compilers and assemblers have generated any instruction formats that were accepted by an 8088, so it became impossible to tighten the specification.
However, what is really weird is why Intel and AMD have continued to accept incrorrect instruction encodings even after later extensions of the ISA that clearly specified only a certain encoding to be valid, but in reality the CPUs also accept other encodings and now there are programs that use those alternative encodings that were supposed to be invalid.